Latest dvd duplicator Tenders | Government dvd duplicator Tenders

Central Government/Public Sector

CTN :43188069

19 Dec, 2025 NA

Nashik - Maharashtra

Tender For supply of spares for euro cutter machines- 0362-117-00 oilpump old number 0212, 0418-1113-00 kurbel messertruger crank, 0423-1113-com zugstange komplett pull arm complete including 0423, 0424, 0422, 0421, 0407, 0408, 0410, 0420, 2*0409, 0414, 0429-0713-00 gleitstein rechts 78-137 right crosshed including 0430, 0439-0713-00 gleistein links 78-137 left crosshead including 0430, 0441-1113-00 zugstangenbolzen pullarm shaft/ draw bar axis knife holder including 0442, 0458-1117-00 excenterscheibe eccentric cam (1150-1760) old number 0449, 0455-1117-00 halteblock locking bloc (1150-1760) old number 0444 including 0445, 0502-1117-00 nadellager needle bearing, 0504-1113-00 kurbel pressbalken li. crank clamp left, 0506-1113-00 zugstange pressbalken li. clamp puller left side, 0510-1100-00 federstange spring tie rod, 0513-1117-00 schmierlager solid lubricant bearing, 0521-1117-00 schmierlager solid lubricant bearing, 0522-1113-00 zugstange pressbalken re. clamp puller rigt side, 0526-1117-00 nadellager needle bearing, 0527-1113-00 kurbel pressbalken re. large crank arm ri., 0528-1117-00 nadellager pressbalkenkinematik needle bearing crank, 0529-1117-00 wellenbuchse roller shaft pad, 0530-1117-00 drucklager bearing for 1150-1760, 0533-1117-00 nadellager pressbalkenkinematik needle bearing crank, 0548-1150-00 presbalkenruckhlofeder clamp retun spring containing 0548, 0547, 0544, 0607-0608-00 feder fußpedal kompl. spring foot pedal compl. containing 0607 and 0608, 0617-0000-00 fußpedalwelle footpedal long screw, 0618-st10-00 positionschalter fußtaster pedal indicator ***st10***, 0813-1117-00 riemenscheibe timing pulley, 0850-0717-00 lager kugelumlaufspindel bearing, 0851-0717-00 largergehuuse front bearing seat, 0859-1100-00 spindelmuttergehuuse ball screw nut seat, 0863-1100-00 spindel mit spindelmutter ball-screw spindle with nut, 0866-0717-00 lager kugelumlaufspindle bearing, 0867-0717-00 lagergehuuse rear bearing set, 0871-1100-00 antriebsscheibe kugelumlauf spindle large synchronous wheel, 0872-1100-00 spannbuchse large synchronous wheel tensioner, 0877-0000-00 schaltleiste lang long travel switch contact, 0878-0000-00 schaltleiste kurz short travel switch contact, 0886-0888-00 kunststoff-luftduse kompl. air nozzle kompl. old number 08102,03,04, 1002-1113-00 feder spring, 1003-1113-00 o-ring kupplungsdeckel o-ring clutchcover, 1010-1113-00 kupplungsscheiben (belege) clutch pads (2 half pieces = one set), 1012-1113-00 mitnehmerscheibe transmission plate, 1013-1117-00 bremsfedern breaking springs 6 pcs/set, 1014-1113-00 gegenplatte spring spacer, 1016-1113-00 oldichtung rotary shaft seal, 1017-1113-00 kupplungsscheiben (belege) brake pads (2 half pieces = one set), 1023-1113-00 sicherungsring fur km mutter back stopping sheet, 0128-1113-00 getriebe komplett 1150/1370 gear box complete including worm wheel, worm shaft, 1034-1113-o-ring dichtung o-ring seal, 1036-1113-00 hydr. kupplung (4 bohr.) hydraulic clutch (4 holes) complete including 1036, 1035, 1001

CTN :43196598

23 Dec, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of accelerator foot pedal assembly suitable for jost , jaldoot , eddy current three wheeler & four wheeler battery operated platform truck cap-03 ton & 02 ton

CTN :42938610

18 Dec, 2025 NA

Nainital - Uttarakhand

Tender For corrigendum : supply of foot operated pedal bin or bucket for bio - medical waste collection (q3)

State Government

CTN :43145347

17 Dec, 2025 9.51 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments at district park at dilshad garden (link chain) (specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thic made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. ., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. ., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrets is set, f

State Government

CTN :43145348

17 Dec, 2025 27.18 Lacs

Delhi - Delhi

Tender For providing and installing open gym equipments with buy back of old gym equipments in all the 6 parks as mentioned in the schedule.(specialized work). - schedule -a , air walker: providing, designing and fixing of air-walker of size 1100x550x 1480 mm fabricated with main post of 114 mm dia and 2.5 mm thick and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all the welding points prior to finishing. all open ends of pie to be closed with gi /lldpe caps, base plate cover shall be made of virgin lldpe plastic by rotational molding with minimum 8 mm thickness, uv resistant and colour as approved by engineer-in-charge. high quality grip rubber should be sued on handles. foot hold shall be made of nylon alloy with rounded edges to prevent impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by engineer-in-charge. the equipment shall be fitted with in built limiters. the equipment shall be fixed on ground with concrete of minimum strength m-25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and pedal and fixing of equipment etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5 mm thick and rest of the pipe of 40 mm dia and 2.5 thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8 mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal seat and base pedal and fixing of equipments etc. (demolishing and disposal of existing cement concrete, excavation work and laying new cement concrete shall not be paid separately)., air swing: providing, designing and fixing of air swing in pair of size 1150x900x1250 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burns. zinc primer paint to be applied at all welding points prior to finishing. pedals shall be made of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8 mm, colorful and uv resistant and environment friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to