Latest earthing chain Tenders | Government earthing chain Tenders

State Government

CTN :40162210

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of c.i./c.s casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.

CTN :40146123

12 May, 2025 NA

Kanchipuram - Tamil Nadu

Tender For purchase of cane carrier chain assembly

CTN :40146204

12 May, 2025 NA

Kanchipuram - Tamil Nadu

Tender For purchase of cane carrier chain spares - cane carrier chain spares as per drg. no. mcsm007.material specification:1) side plate steel confirming to grade 55c8 of is 1875-19782) pin & bush: steel confirming to grade 16ni3cr2 of is 1570 (part-4) 1988.3) roller: en-8 through hardened.breaking load: the chain should withstand a minimum load of 40000 kgs.hardness: pin: 50+/- 5 hrc bush: 40+/- 5 hrc roller: 30+/- 5 hrclength accuracy: the finished chain should be accurate within +0.025 / - 0.0dimensions: the dimension of the cane carrier chain should be as per drawing no. mcsm-007the chemical analysis report of pin, bush, roller and side links breaking strength test report and hardness test report duly signed by the reputated laboratory should be produced along with supply.the chain should be heat treated as per isi., cane carrier chain spares: pin, bush, roller, inner link-a, inner link-b, outer link-a, outer link-b

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

CTN :40045797

18 Jun, 2025 44.00 Lacs

Jaipur - Rajasthan

Tender For supply of earthing chain

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

CTN :40024624

23 Apr, 2025 NA

Multi City - Gujarat

Tender For purchase of carrier chain & its spare/rack for inter rack carrier - complete chain assembly for new cane carrier chain drg no ns m 436 15 r 1, roller part no 5 for new cane carrier chain drg no ns m 436 15, bush part no 6 for new cane carrier chain drg no. ns m 436 15, split pin size 8 x 50mm part no. 7 for new cane carrier chain drg no ns m 436 15, block type inter rack carrier chain complete assy. drg no ns m 346 r 13, attachment pin with nut part.no 8 for bagasse carrier chain drg ns bcc a5 20 7 spare for bagasse carrier chain, bajaj boiler bagasse carrier chain complete assy drg ns m rbc 007, feedar table chain complete assembley drg no ns m 418 14, return bagasse carrier chain complete assly drg ns m 687, pin part no 8 attachment pin spare for return baggase carrier chain drg no.ns m 687, pin part no.8 attachment pin spare for return baggase carrier chain drg no.ns m 687, split pin size 6 x 65mm part no 7 for block type inter rack carrier chain, rack for inter rack carrier drg ns m r 411 13

CTN :40015496

26 Apr, 2025 NA

Tiruvannamalai - Tamil Nadu

Tender For cane carrier chain

CTN :39841423

21 Apr, 2025 36.50 Lacs

Panchkula - Haryana

Tender For disposal of list comprising of items from sr. no. 1 to 437 (single lot of 437 items) - the assistant director (tech.), govt. industrial dev centre for tool and dies and anodizing, jagadhari - hmt horizontal milling m/c, model fn2h with tool/ acc., roll grinding machine with tool/ accessories and two additional panels:- i) (bch make 4.8 kw dated 28-01-83) ii) (bch make 22 kw dated 28-06-83), i) r. s joist ii) wire rope type electrical hoist wire rope (fitted in hoist), i) hmt drill machine with accessories ii.) bench drill machine stand (m.s. angle ), i) gen set 48kw/60kva with acc. batteries, ii) heavy duty pedestal grinder gd-i with acc., bench grinder, jig boring machine with acc., universal measuring machine no.828 with acc., hmt universal cylindrical grinding m/c g-22 with acc., i) hmt heavy duty centre lathe m/c, model l- 45 with cutting tools/ acc. ii) electric hoist cap. 7.5 ton with platform 6.1x22 mtrs, fired furnace (53x36) with acc. [thermocouple, thermocouple, temperature indicator (digital)], i) pilot self raising portable genty crane stand cap. 5 m. ton without hoist ii) m.s garder/m.s plate & angle(fitted in genty crane stand) iii) electric hoist iv) wire rope with clamp (fitted in hoist) v) spur gear crane vi) trolley (overhead) vii) chain(fitted in crane), wire ropes( scrap), milling cutters (scrap), spanner set, loose spanner, surface block (marking block), nose plier, plier, universal protector combination set, file flat 10, steel almirah 50x30x17, type writer, vernier caliper 15cm, ms rack, rack, dp cutter 12dp no.7, toolkit consisting of 100mm dia cutter with arbor cutter 63mm, file flat 8, handle file wooden, pipe die with handle, pipe wrench, steel almirah78x40x21, steel rule12, oil cane, round die3/8 (broken), drill chuck with arbor, slitting saw cutter, tool holder 1/2", dog carrier 1, dog carrier, drill sleave, plier, bench vice, round die 5/8 (broken), circular table 400mm, spanner set, loose spanner, dial indicator, stand magnetic, digit micrometer 25-50mm code no. 193-102, file 10 with handle, m.s rack, carbide tipped centre, file, oil cane, file6, file, oil cane, tap set 3/8 (broken), drill chuck and drill chuck arbor, dog carrier 11/2, loose spanner, revolving centre, surface gauge (used) (marking block), outside inside caliper, m.s rack, flat file, flat file8, file 12, spanner set, try square, empty drums, steel almirah 78x40x21, screw driver 10, soldering iron, plier, pad lock, dial test indicator, dial test indicator, magnet stand- 7012 ii) pneumatic stand - 7015, pocket calculator, m.s rack, file8, digit micrometer 50-75mm, drill chuck, drill stand, steel tool cabinet765x435x1170mm, bench vice, digit micrometer 0-25mm code no.193-101, vernier 6-150mm, carbide tipped centre, bench vice 6, carbide tipped centre, hand reamer 20mm, table lamp, end mill 22mm, end mill 20mm, depth micrometer 0-50 mm, empty cylinder (15kg), thickness gauge code 184-103, dial indicator, outside micrometer with dial indicator (25-50mm), tap set (broken), drill 4mm (broken), metric measuring tape, dial caliper 150mm, pitte space master traveling trolley with drafting chair, aristo calculator, flat file 12, chain pulley block (trolly) cap. 5ton with r.s joist, steel rule12, lock, hacksaw frame 12, drill 7mm, digit micrometer 75-100mm code193-104, vernier caliper6, m.s rack, wolf precision tool post grinder with internal grinding attachment, revolving centre, outside inside compass, plier, steel rule24, shell end mill 40x16x32, tool cabinet 765x435x1170mm, drill chuck, vernier caliper6-150mm, drill 5/16, wall clock, wall clock, steel tool cabinet, library table 8x4x21/2, equal angle cutter 80x20x22mm 600, equal angle cutter 63x16x22mm, end mill 22mm, pad lock, g plate, i) optical comparator pj-250 with acc. ii) tool maker microscope, dial indicator, end mill 20mm, outside micrometer 100-125mm, convex cutter 63x8x22mm, orpat calculator, out side micrometer 0-25mm, flat file 10, screw driver, heater, i) vernier callipe

CTN :39333583

27 Feb, 2025 44.00 Lacs

Jaipur - Rajasthan

Tender For supply of earthing chain

Earthing Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Co-operative