Latest edge angle Tenders | Government edge angle Tenders

CTN :42619647

22 Dec, 2025 NA

Khurda - Odisha

Tender For bid to ras bid to ras corrigendum : supply of connection pipe with nuts (v2) (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , condenser 4 mfd , aluminium tower bolt 150mm , bipin holder , three pin plug 5 amp , ampere tape , three pin plug 16 amp , aluminium service cable , insulation tap , grease , aluminium aldrop 250mm , bib cock , particle board , pvc cover , dendrite , aluminium aldrop 200mm , ms nails , gi pipe , iron bracket , kit forll level flushing cistern , aluminium wire mesh , bracket for curtain rod , cp stop valve , hack saw blade , pvc pipe , plywood , tower bolt , hasp and staple , bow handle , sand paper , gi grating , bow handle , helical door spring , butt hinges , ss grating , door stopper , gi nipple , gi elbow , gi tee , pvc grating , galvanised iron tee 15mm , m seal , conduit pipe , nut bolt , hook and eye , screw 75mm , gi socket , plastic washer , white cement , nails , butt hinges , washer for bib cock , screw 25mm , screw 20mm ) /bid number : gem/2025/b/6844754 * /dated: 06-11-2025 & & / bid document 1 / 50

CTN :42965418

20 Dec, 2025 NA

Rajauri - Jammu And Kashmir

Tender For bid to ras supply of foam , coir foam , nails , canvas og , rexine black , rexine brown , brass plate , ms sheet , ms angle iron , ms hexagonal rod , ms flat sheet , allen key , allen key wrench hexagonal , armature bearing puller , bearing puller 3 leg , bent nose plier insulated , bi-hexagonal ring spanner , tip tool boring , tip tool v tool rh , carbide tip tool turning rh , carbide tip tool turning lh , carbide tip square , turning tool for threading , turning tool , tap and die , tap and die set , tap and round die set , ms welding rod copper coated , ms welding rod 2. 5mm , ms welding rod 3. 15 mm , ms welding rod 4mm , welding cable black , welding cable red , welding gas pipe red , welding gas pipe blue , arc welding holder , welding glass plain , welding glass black , welding goggles black safety , welding goggles white safety , welding gloves leather , industrial gas oxygen , industrial gas actylene , gas cutting nozzles , gas regulator oxygen , regulator for da , oxygen gas regulator , acetylene gas regulator , gas cyl acetylene with cap , gas cyl oxygen with cap , gas cutting torch , brazing rod brass , grinding wheel for hand grinder , grinding wheel , grinding wheel for bench grinder rough and medium , grinding wheel for hand grinder , wire brush , crocodile clip , battery terminal , battery cable , petrolium jelly , aux conactor ) /bid number: gem/2025/b/6925937 * /dated: 28-11-2025 & & / bid document1 / 71

CTN :43054630

20 Dec, 2025 NA

Solan - Himachal Pradesh

Tender For bid to ras supply of xlpe cables for working voltages from 3. 3 kv up to and including 33 kv as per is 7098 (part 2) (q3) , cable termination kit (v2) (q3) , excavation in trenches not exceeding 1 point 5 meter wide and not exceeding 1 point 5 meter in deep getting out in hard dense soil for stay assembly erection of poles complete , returning filling in including spreading levelling watering and well ramming in layers n exc 25cm thick , removing of excavated material n exc 50m and depositing where directed at a level n exc 1 point 5m above the starting point , supply install testing and commissioning of ht 11 kv 3 phase 50 cycles outdoor type totally enclosed metal clad switchgear complete with vcb having rupturing capacity upto 350 mva , supply and fix cable jointing kit for 11 kv straight through cold shrink 3 core x 120 sqmm complete , material and labour for reinforced concrete pipes 150mm dia class np2 laid and jointed complete with collars for cable protection , supply and install synthetic rubber insulated mats 2 pint 5 mm thick for voltage upto 11kv for electrical purpose suitable for electrical shock and safety of sizes 2m x 1m complete , m and l for pcc 1 column 4 column 8 type d2 using 40mm graded stone aggregate in foundation and mass concrete , m and l for pcc 1column 2 column 4 type b1 using 20mm graded stone aggregate in coping and the like including weathering slightly rounded angles , material and labour for chain link ms galvanisd fencing including line wires any mesh size and type to any type of standards rails straining bolts , m and l cutting the existing bituminous road concrete surface 150 mm thick to the required width and depth for laying of cable protection pipe , m and l for replacement of unserviceable double walled corrugated hdpe duct pipe of 110mm outer dia , m and l for providing cable route markers cast iron round shaped disc of 150mm dia 3mm thick embossed with marking ht cable mounted on angle iron , m and l for earthing with galvanised steel earth electrode plate of size 600x600x6mm thick ) /bid number: gem/2025/b/6881369 * /dated: 04-12-2025 & & / bid document1 / 20

CTN :43180265

24 Dec, 2025 NA

Salem - Tamil Nadu

Tender For supply of work shop lab equipment and machineries for department of food technology and dairy technology - purchase of basic engineering workshop (equipment), centre lathe machinelight duty, 1.5 hp, bed length 4.5 ft, swing 300 mm, shaper machinestroke length 300 mm, motor 1 hp, adjustable feed, drilling machine (bench type & floor type)0 13 mm capacity, 0.5 hp, 230 vnterface capacity up to 8/10 tb12 vdc power supply, pillar drilling machine20 mm capacity, 1 hp, arc welding transformer set (portable)300 a, 230/415 v with accessories , bench grinder200 mm double-ended, 1 hp, power hacksaw machine200 300 mm stroke, motorized, casting & moulding setupsand muller, moulding box, patterns, tools, vernier caliper0 150 mm, least count 0.02 mm, micrometer (outside) - 0 25 mm, least count 0.01 mm, steel rule - 300 mm, stainless steel, try square - 150 mm, hammer set - ball peen, cross peen, sledge, files - flat, round, half-round, triangular, 250 mm, hacksaw frame with blades adjustable, 300 mm, 24 tpi, chisels - flat, round nose, cross-cut, 200 300 mm, taps and dies set metric, m6 m20, bench vice 100 mm, swivel base, c-clamps - 100 mm opening, spanners & wrenches set 6 32 mm, calipers (inside & outside)150 mm, scriber & surface plate 300 300 mm cast iron plate, angle plate & v-block hardened steel, hand drilling machine - (0 10 mm), wood saw (hand & tenon saw)hand type, anvil & swage block 15 kg, mild steel - 1 no each, carpentry tools set - jack plane, chisel set, marking gauge, mallet, sheet metal tools - snips, stakes, groover, seaming tool, sheet metal folding/bending machine (hand/bench)capacity 1.0 2.0 mm ms sheet , vernier height gauge - 0 300 mm, least count 0.02 mm, slip gauge (gauge block) setasme/bs standard, 1.000 100 mm set, tool room workbench with vice (heavy duty)4 benches, marking / surface plate accessoriesscriber, surface clamp, angle plate, dial indicator / test indicator 0 10 mm, 0.01 mm resolution, bevel protractor - 0 360 , least count 5 or 1 , punches & drifts set - 2 12 mm, center punch, prick punch steel, 4 10 mm, resistive load bank - variable 0 5 kw, suitable for 1 and 3 operation, auto transformer (variac) - 0 270v (1 ), 0 470v (3 ), 10a, digital multimeter auto-range, true rms, 0 600v, 10a, rheostat(wire wound)200 /2a ,50 /10a ,100 /5a (each 2 sets), cro / digital oscilloscope dual channel, 20 mhz, function generator - 1hz 100 khz, sine/square/triangle, digital tachometer - non-contact, 0 10,000 rpm, wattmeter lpf & upf - 0-600v ,0-20a, ammeter (ac/dc) - 0-5a,0-30a (each 5 nos.), stop watch - digital,0.01 s resolution, inductors/coils - 0.1h to 1h,10 a rating, dc power supply rectifier, power factor meter - 0 270v (1 ), 0 470v (3 ), 5a, industrial protection devices board mcbs, elcb, mccb, fuses, relays - board, industrial electrification trainer- 3-phase wiring, contactors, relays, indicators, ac power distribution panel, dc power distribution panel

CTN :43203051

26 Dec, 2025 NA

Gurdaspur - Punjab

Tender For supply of angle 25 x 5mm e e--angle 25 multiply 5mm , flat angle 40 multiply 3mm , iron pipe , jalli , nutt bolt 2 inches , welding rod , flat angle 25 multiply 3mm , square pipe 40mm , cutter blade , square pipe 1 multiply 1mm , ms flate 23 multiply 4mm , angle flat 20 multiply 4mm , angle 30 multiply 8mm

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

CTN :43159177

27 Dec, 2025 NA

Dehradun - Uttarakhand

Tender For supply of office shelter c c - orl ds wall panel 4000x1000x50mm , orl ds wall panel 900x1000x50mm , orl ds wall panel 1900x1000x50mm , mild steel bar tmt bar 8mm dia and upto 16mm dia to length , office shelter wall panels , office shelter window , office shelter roof ceiling , fd security fence angle iron picket 65x65x6mm length 2 point 8 mtr , fd security fence ms flat 50x5mm of 1 point 80m ht , fd security fence ms flat 50x5mm jindal 3 mtr , fd security fence angle iron picket 50x50x6mm strut post of height 2 point 35mtr jindal , fd security fence barbed wire , fd security fence chain link fence dia wire 4mm and size of mesh 100x100mm , fd security fence 12mm dia 50mm long bolt with nuts and 2x washers for each set , solar security lights set ) /bid number: gem/2025/b/6972224 * /dated: 12-12-2025 & & / bid document1 / 24

CTN :43182680

25 Dec, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of wooden door size 33 inch x 82 inch with complete accessories , door mesh size 40 inch x 90 inch , aluminiun sliding bolt 6 inch isi marked , aluminiun tower bolt 9 inch isi marked , cp curtain rod with bracket and dooms isi marked , mcb 32 amp sp , switch socket combination 5 amp with gang box , insulation tape 19mm wide 1 point 25mm thick 9m long , black screw 1 point 5 inch isi marked , switch socket combination 15 amp with gang box , pvc switch box of size 10 inch x 12 inch with plate , 5 amp switch piano type , acrylic sheet size 8 feet x3 feet , white cement , distemper , paint brush 5 inch , bulk head fittings with 20 watt led bulb , white paint , ply wood 6 feet x4 feet x8mm thick , cloth hanger 6 hooks cp isi marked , led tube light of 20 w 4 feet long with fitting , pvc caping and casing 25mm and 2 mtrs long , pvc cable 1 point 5 sqmm copper conductor single core , pvc cable 2 point 5 sqmm copper conductor single core , black screw 1 inch isi marked , flexible pipe 25mm isi marked , pvc ceiling rose , batten holder , pvc square box 4 inch x 4 inch isi marked , pvc laminated gypsum false ceiling panel of size 595 x 595mm x8 mm thick with water proofing film on back side , sds screw 2 inch isi marked , metal cutting wheel 5 inch , welding rod , window glass 52cm x 36 cm , m seal 100 gm pkt isi marked , pvc cable 16 sqmm aluminium 2 core , pvc cable 1 point 0 sqmm copper conductor single core , flexible wire pvc insulated twisted of size 23 or 0 point 0076 , black screw 6mm x 19mm isi marked , black screw 4mm x 10mm isi marked , black screw 6mm x 40mm isi marked , mcb dp 8 way , mcb spn 63 amp , angle holder , led lamp 9 watt , change over switch 63 amp 2 pole 240 w , exhaust fan 18 inch 1400 rpm , pvc switch box of size 8 inch x 6 inch with plate isi marked , ceiling fan 1200 sweep with fan hooks and fan regulator , black screw 1 or 2 inch isi marked , brown paint , og paint , thinner , paint brush 4 inch , paint brush 2 inch , roller 14 inch for distemper isi marked , acrylic sheet size 21 inch x 15 inch , door mesh size 40 inch x 80 inch , nails 2 inch isi marked , nails 4 inch isi marked , binding wire isi marked , scantling pieces of 3600 mm x 100 mm wide and 50 mm thick , wooden cutting blade 5 inch , wooden cutting blade 8 inch , cement of 43 grade opc in sealed bags each weighting 50 kgs , crushed stone aggregate 20 mm grading conforming to is 383-1970 , river sand conforming to is 2116-1980 , high tensile gi barbed wire of 3 point 15 mm dia with zinc coating and dia of barb wire should be 2 mm , punjies 5 prong made of 8mm dia ms bar having weight 0 point 55 kg each , laip made of angle iron 50x50x6mm 1800mm long minimum weight of 8 point 10 kg each laip , punched tape concertina coil of 1050 mm dia with 56 loops and 12 mtrs stretchable length

Central Government/Public Sector

CTN :43188558

05 Jan, 2026 2.46 Crore

Bangalore - Karnataka

Tender For tender for supply of bottom side skin lh sta 12 to sta 18 , bottom side skin rh sta 12 to sta 18 , tool for bottom side skin lh sta 12 to sta 18 , tool for bottom side skin rh sta 12 to sta 18 , splice strip side lh sta 18 , splice strip side rh sta 18 , tool for splice strip side lh sta 18 , tool for splice strip side rh sta 18 , shear wall weapon bay lh sta 7 to sta 16 co bond assy , shear wall weapon bay rh sta 7 to sta 16 co bond assy , tool for shear wall weapon bay lh sta 7 to sta 16 co bond assy , tool for shear wall weapon bay rh sta 7 to sta 16 co bond assy , fuel floor fwd st 7 to sta 10 , tool for fuel floor fwd st 7 to sta 10 , fuel floor mid st 10 to sta 13 , tool for fuel floor mid st 10 to sta 13 , lh side wall bot assy sta 16 to 18 , tool for lh side wall bot assy sta 16 to 18 , hydraulics bay cover lh sta 14 to sta 18 , hydraulics bay cover rh sta 14 to sta 18 , tool for hydraulics bay cover lh sta 14 to sta 18 , tool for hydraulics bay cover rh sta 14 to sta 18 , splice strip sta 6 x 3780 , tool for splice strip sta 6 x 3780 , angle sta 6 x 3780 , tool for angle sta 6 x 3780 , angle sta 5 x 3360 , tool for angle sta 5 x 3360 , splice strip sta 5 x 3360 , tool for splice strip sta 5 x 3360 , center frame top sta 16 x 6600 , tool for center frame top sta 16 x 6600 , splice strip lh sta 8 , splice strip rh sta 8 , tool for splice strip lh sta 8 , tool for splice strip rh sta 8 , stub skin splice lh , stub skin splice rh , tool for stub skin splice lh , tool for stub skin splice rh , fuel floor with dishing lh sta 9 to x 5540 , fuel floor with dishing rh sta 9 to x 5540 , tool for fuel floor with dishing lh sta 9 to x 5540 , tool for fuel floor with dishing rh sta 9 to x 5540 , center wall y 0 sta 10 to sta 11 , tool for center wall y 0 sta 10 to sta 11 , center wall y 0 sta 11 to sta 12 , tool for center wall y 0 sta 11 to sta 12 , center wall y 0 sta 12 to sta 13 , tool for center wall y 0 sta 12 to sta 13 , support member sta 9 lh , support member sta 9 rh , tool for support member sta 9 lh , tool for support member sta 9 rh , support member x 5000 lh , support member x 5000 rh , tool for support member x 5000 lh , tool for support member x 5000 rh , bot. side frame. lh sta 14 , bot. side frame. rh sta 14 , tool for bot. side frame. lh sta 14 , tool for bot. side frame. rh sta 14 , side frame bot sta 16 x 6600 lh , side frame bot sta 16 x 6600 rh , tool for side frame bot sta 16 x 6600 lh , tool for side frame bot sta 16 x 6600 rh , side frame bot sta 17 x 6875 lh , side frame bot sta 17 x 6875 rh , tool for side frame bot sta 17 x 6875 lh , tool for side frame bot sta 17 x 6875 rh , edge member lh sta 16 sta 18 , edge member rh sta 16 sta 18 , tool for edge member lh sta 16 sta 18 , tool for edge member rh sta 16 sta 18 , side frame bot lh sta 11 , side frame bot rh sta 11 , tool for side frame bot lh sta 11 , tool for side frame bot rh sta 11 , center wall y 0 sta 8 to sta 9 , tool for center wall y 0 sta 8 to sta 9 , splice strip lh sta 10 , splice strip rh sta 10 , tool for splice strip lh sta 10 , tool for splice strip rh sta 10 , splice strip lh sta 11 , splice strip rh sta 11 , tool for splice strip lh sta 11 , tool for splice strip rh sta 11 , angle bot lh sta 11 , angle bot rh sta 11 , tool for angle bot lh sta 11 , tool for angle bot rh sta 11 , sikin sta 10 to sta 12 lh , sikin sta 10 to sta 12 rh , tool for sikin sta 10 to sta 12 lh , tool for sikin sta 10 to sta 12 rh , skin edge stiffner fwd sta10 lh , skin edge stiffner fwd sta10 rh , tool for skin edge stiffner fwd sta10 lh , tool for skin edge stiffner fwd sta10 rh , skin edge stiffner bot. aft sta8 lh , skin edge stiffner bot. aft sta8 rh , tool for skin edge stiffner bot. aft sta8 lh , tool for skin edge stiffner bot. aft sta8 rh , skin edge angle lh sta 8to sta 10 , skin edge angle lh sta 8to sta 10 , tool for skin edge angle lh sta 8to sta 10 , tool for skin edge angle lh sta 8to sta 10 , fwd bot. patch skin lh , fwd bot. patch skin rh , t

CTN :43170174

25 Dec, 2025 20.00 Lacs

Gurdaspur - Punjab

Tender For supply of chain link fencing with installation d d---supply and installation of 3 inch 3 inch 8ft cross fence of 10 gauge steel chain link fence , supply and installation of 2 inch ms flat patti of 4mm with 72 inch overall length , supply and installation of 2. 5 inch 2. 5 inch angle of 6mm with 120 inch overall length , stainless steel 2. 5 inch screw , supply and installation of 1. 5 inch 1. 5 inch iron angle of 4mm of 1ft length

Edge Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector