Latest elastic stop nut Tenders | Government elastic stop nut Tenders

Central Government/Public Sector

CTN :40867037

04 Jul, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of elastic stop nut to dlw part no. 15363223 and to dlw drg no. ske-1289 alt b, line no.026. [ warranty period: 30 months after the date of d elivery ]

CTN :40848371

30 Jun, 2025 NA

Mumbai - Maharashtra

Tender For procurement of various general items for the use of mulund garage vehicles under ex.engr.tr.es. - bolt with nut f.t. 5/16 x 1/2" bsw, bolt with nut f.t.1/4 x 1" bsw, bolt with nut 3/8 x 1", bolt with nut full thread 5/16 x 1", joint nut bolt 0.5x1.75 bsf a/l, washer ms 7/8" dia x 2 mm thk., eye bolt with nut 3/4" x 12", bolt with nut full thread 1/4 x 1", bolt with nut full thread 1/4 x 2", bolts with nut high tension 3/8 x1 , nut with bolt 1/2 x 1 ", pop rivets 3/16" x 1", bolt with nut 3/8" x 2", tommy, tyre valve pin, wiring clip round medium, wiring clip round small, plain washer 9mb, s.s. sheet metal screw 8 x 38 mm f.t, s.s. sheet metal screw 6x 19 mm f.t, s.s. sheet metal screw 10x13 mm f.t, deep impact socket iml 30h,1/2 drive size 80 mm length., deep impact socket iml 32h,1/2 drive size 80 mm length., deep impact socket iml 33h,1/2 drive size 80 mm length.

CTN :40855716

17 Jul, 2025 NA

Multi City - Multi State

Tender For supply of anti climb fence stores - weld mesh panel , omega clamp with profile cover plate , mushroom head bolt nut with security nuts for omega clamp , inter panel binder , mushroom head bolt nut with security nuts for inter panel binder , fence post , straining y arm , fitting accessory for straining y arm , intermediate y arm , fitting accessory for intermediate y arm , punched tape concertina coil ptcc , galvanised steel barbed wire , hog rings , eye bolt for straining y arm , anchor rod , tie wire , steel gate big size 5.23 x 2.70 m including wicket small gate.

CTN :40858579

04 Jul, 2025 19.98 Lacs

Sultanpur - Uttar Pradesh

Tender For 10/edc(s)/2025-26 - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted on all 04 corners and 01 side for gate.

CTN :40858581

04 Jul, 2025 19.98 Lacs

Sultanpur - Uttar Pradesh

Tender For runningcontractfordepositworksunderedd-lambhua,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted

CTN :40858583

04 Jul, 2025 19.98 Lacs

Sultanpur - Uttar Pradesh

Tender For runningcontractfordepositworksunderedd-baldirai,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted

CTN :40858584

04 Jul, 2025 19.98 Lacs

Sultanpur - Uttar Pradesh

Tender For runningcontractfordepositworksunderedd-jaisinghpur,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grou

CTN :40858587

04 Jul, 2025 24.69 Lacs

Sultanpur - Uttar Pradesh

Tender For runningcontractfordepositworksunderedd,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted on all 0

Central Government/Public Sector

CTN :40702159

30 Jun, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of carpentry materials - pop screws-3/4" size, pop screws-1" size, pop screws-1 1/2" size, pop screws-2" size, ms nails- 3/4" size, ms nails- 1" size, ms nails- 2" size, ms nails- 3" size, ms nails- 4" size, powder coated aluminium door handles-3", powder coated aluminium door handles-5", powder coated aluminium tower bolts -4" size, powder coated aluminium tower bolts -6" size, powder coated aluminium tower bolts -8" size, ms butt hinges-3", ms butt hinges-4", ms butt hinges-5", powder coated aluminium al drop with bolt nut 10", mortice locks 7 lever, hydraulic door closure, (hafele/godrej/hardwyn/yale), powder coated door stopper - 5"size heavy, powder coated door stopper - 6"size heavy, plain glass -4 mm thick ( 16" x 12") (pm headed 48x18), pinned glass -4 mm 16" x 12"), glass putty lappa 1 kg each, ply sheets- 6mm thick ( 8 feet x 4 feet), ply sheets- 12mm thick ( 8 feet x 4 feet), ply sheets- 18mm thick ( 8 feet x 4 feet), ply sheets- 25mm thick ( 8 feet x 4 feet), glossy laminate sheets 8' x 4' size 1 mm thick (approved colour by hal)., heatex fevicol - 1 kg each, powder coated aluminium window handles - 3" size, powder coated aluminium window hooks and eye- 5" size, telescopic key board channel - 14", telescopic key board channel - 12", telescopic key board channel - 16", ebco/godrej/hafele, telescopic key board channel - 20", godrej drawer locks / cup board, m s l clamps- 1 x 1", m s l clamps- 1/1/2", m s l clamps- 2x2", m s l clamps- 3", synthetic enamel paint (approved colour by hal)1 ltr each, thinner (1 ltr each), flat paint brush 3", flat paint brush 4", roller refill 3", roller refill 4", oil bond distemper 1 ltr each, exterior tractor emulsion paint (approved colour by hal)1 ltr each, (asian/berger/nippon/equilent), putty blade 4", putty blade 6", wood polish 1 ltr each, nc thinner 1 ltr each, gi sheet 1 mm thick ( 8 feet x 4 feet), decorative plywood 4 m ( 8 feet x 4 feet), telescopic draw chairs tables, steel cupboard locks with key, steel cupboard brackets, cupboard magnet catchers, telescopic draw channel 18" soft close, multipurpose lock ( godrej) 25mm, cupboard locks/ward rope, plain glass -6 mm thick (18" x 48"), plain glass - 8 mm thick ( 18" x 48"), self thread star screw-1" (each packet 75 pcs), 10 x 25mm hex bolt and nut genuine fasteners, headless nails-3/4" (thin type) 1 box (2.5kg), stainless steel sliding window mesh 1.2 mm aparture and 0.5 mm thick wire each roll will be of 30 m length x1.2 m width grade 304, 28 series size mild steel 5 kg welding electrode dia 3.15mm x length 350mm (pack of 120 pcs) make (esab/victor/saintron/stellite), metal paste 250 gm each packet, galvanised iron mesh compressing of 1.40 mm aparture and 0.63 mm thick witre each roll will be of 15 m length x1.2 m width, decorative plywood 4 mm ( 8 feet x 4 feet) veaneer, painting roller 3" with handle, painting roller 4" with handle, oil bond distemper 4 kg each, ms nails -1/2" size, ms nails -2/1/2" size

CTN :40825717

15 Jul, 2025 NA

Parganas - West Bengal

Tender For purchase of spares - oring (ms sl-164) , gasket(fig-3250 oblique 02) , key(fig-62) , spring , ring snap , screw driver , collar , gasket header cover , spnr ojde 16x17 , packing (bd eng fig k2)(1set 9nos) , seal o ring (ms sl-128) , washer , pin dowel , hexagon screw , o ring , key(fig no-6015 , sl no-50) , spnr de 20x22mm , terminal battery negative (fig-1035) , bolt , spring(fig-03) , ojde spanner 18x21 mm , spring , positive terminal (ms sl-649) , spring , oil can 1 1 by 2 pint , o ring , o-ring , seal bearing , bushing rubber , gasket(ms sl-139) , flange , adjustable spanner 200mm , plunger inter lock , seal , oil , screw , spring , connection fuel inlet (ms sl-101) , gasket , packing , strainer , clamp , clamp , flexible nut spnr 350mm , spanner 10x11 mm (ojde , open end) , spill tube , hour meter cable , clamp , socket 22 mm(eqpt sl no-g15313) , wrench filter , hose(fig-38) , bolt , o ring , socket 17mm , pin , piston , spnr ojde 32x36mm , connection fuel drain(cum-p30) , tube assy , pre filter assy , ring o cover , screw driver attachment(sl no-g15313) , toggle switch (ms sl-202) , knob , bearing , crnkpin , std(sp) , 1pr , ring , rubber hose lg 72 , spnr ojde 12 x 13 , hose , hose , bearing , rfi capavitor assy , gasket cover , oil cooler , bushing , spnr ojde 18x19mm , 24 mm socket(sl no-g15313) , nut rod (ms sl-06) , 27 mm socket(sl no-g15313) , pinion spring , tube , 30 mm socket(sl no-g15313) , seal oil , sealing ring for 4 (mico) , shaft , clutch inner race(ms sl no-593) , seat (hyd filter) , rachet reversible , joint eye , plug , ring compression , set (oem) , socket 24mm with handle , connector , scraper lh , lever , wrench hook , ring seal , pipe , exhaust , main bearing , thrust , ball brg , cover , hose , head , bush pinion (ms sl-590) , hyd pump service kit , fuel pump , clutch plate , tube , tube , hose(n743) , bearing , ball , regulator (make lucas tvs)(ms) , lever change , adaptor , flywheel , strainer , flyweight assy , solonide switch , solonied switch , relief valve assy , lamp guard rear rh , lever (fig no 3065) , plate , bushing spherical(fig-6086) , adapter , manifold , water , manifold , water , oil , filler , bracket , flange , coupling , water pump service kit , brake(band) assy , hose , housing , drive tachometer , fuel cut-off valve , alternator assy , rod , seal kit , hose , bearing assy , hose (fig no-4512) , gear driven reverse(fig-2125) , lever , cover , shell connecting rod std (ms sl-07) , cover , bearing , ball , gear driven 3rd , trunion assy , rod , mounting flange assy , c ebracket assy , fan , grill , feed pump assy , cyl assy(fig-41) , rod , drum brake , starter (l-tvs -11teeth) , gear assy , idler gear , delivery valve holder , shifter clutch dog(price list sl-836) , pressure plate assy , board floor , idler front , gear and pinion set (counter shaft) , intermediate shaft a , joint (p-141) , camshaft(os sl no-526) , sprocket shaft removal(ctlg sl-14) , main clutch assy , clutch housing assy

Elastic Stop Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector