Latest electric controller Tenders | Government electric controller Tenders

Central Government/Public Sector

CTN :41521300

15 Sep, 2025 45.00 Lacs

Kharagpur - West Bengal

Tender For procurement of spectrometer with 2d array ccd

Central Government/Public Sector

CTN :41531793

23 Sep, 2025 NA

Hubli - Karnataka

Tender For supply, installation & commissioning of eddy current array testing equipment.

State Government

CTN :41524390

27 Sep, 2025 3.70 Crore

Jaipur - Rajasthan

Tender For technical specification point wise dbs implant & accessories - dbs rechargeable with directional lead with25yr battery life & image guided programming integrated inside clinician programmer with micc multiple independent current control technology with zero volt technology,bluetooth connectivity with clinician and patient programmers, usfda & ce approved kit contents: rechargeable pulse generator-1 , directional lead kit -2 , extension kit -2 , burr hole locking kit -2 , tunneling tool -1 , patient remote control kit -1, patient charging kit -1 , dbs rechargeable with non directional lead with 25yr battery life & image guided programming integrated inside clinician programmer micc multiple independent current control technology with zero volt technology,bluetooth connectivity with clinician and patient programmers. have 8 contact non-directional lead kit with array span of 15.5mm for maximum coverage, usfda & ce approved kit contents:rechargeable pulse generator -1, non-directional lead kit -2, extension kit -2, burr hole locking kit -2, tunneling tool -1, patient remote control kit -1, patient charging kit -1, dbs non rechargeable with directional lead with image guided programming integrated inside clinician programmer micc multiple independent current control technology &bluetooth connectivity with clinician and patient programmers,usfda & ce approved kit contents: non-rechargeable pulse generator -1 , directional lead kit -2 , extension kit -2, burr hole locking kit -2 , tunneling tool -1 , patient remote control kit -1,), dbs non rechargeable with non-directional lead with image guided programming integrated inside clinician programmermicc multiple independent current control technology withbluetooth connectivity with clinician and patient programmers. should have 8 contact non-directional lead kit with array span of 15.5mm for maximum coverage,usfda & ce approved kit contents: non-rechargeable pulse generator -1, non-directional lead 1), dbs implant kit with non-rechargeable, 3t mri compatible and sensing enabled ipg and directional leads.the implanted pulse generator (dbs neurostimulator- ipg) should have a minimum service life of 5-7 years and there should not be a need to recharge it periodically.ipg should have the capability for group programming and ability to store the programming data in ipg itself and retrieve from ipg.the system should be able to sense local field potentials (lfps) from brain targets and this data should be accessible through the physician programmer. the leads should be able to stimulate in specific directions, in addition to the ability to stimulate circumferentially. markers on leads should facilitate directional programming even if lead rotates. the leads should also be able to sense lfps.burrhole kit should be there for securing lead in place. microelectrodes for intra op stimulation and recording should be there.the extension connecting the lead and ipg should be flexiblethere should be a tunneller to place the extension wire and the tunneller should be metallic and firm to enable smooth tunnelling.the system should have approval for conditional full-body 1.5t & 3t mri compatibility.patient programmer, enabling the patient to see and if needed, modify the stimulation under guidance, should be available. patients should be able to mark dyskinesia, tremor etc. using the programmer., dbs implant kit with rechargeable, 1.5t & 3t mri compatible and sensing enabled ipg and directional leads.the implantable pulse generator (dbs neurostimulator- ipg) should have a service life of 15+ years if regularly recharged by the patient at specified intervals.ipg should have the capability for group programming and ability to store the programming data in ipg itself and retrieve from ipg.the system should be able to sense local field potentials (lfps) from brain targets and this data should be accessible through the physician programmer. the system should have fda ap

Central Government And Public Sector

CTN :41530650

12 Sep, 2025 NA

Lumding - Assam

Tender For work of surface defect detection on wheel of lhb coaches by eddy current array (eca) technique during d-3 schedule at coaching depots of scl & agtl for period of three (03) years.

State Government

CTN :41231536

25 Aug, 2025 6.25 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of supply of various resistor inductor and transistor d d - transistor bc 107 , transistor bc 177 , transistor 2n 3055 , transistor 2n 2904 a , resistor, mfr 3.3k, 0.5 , aluminium resistor wire wound 1.5e , 220e,mfr 0.25w , resistor, mfr 1.8k , resistor, mfr 390e , 47 e resistor , transistor 2n 6052 , resistor, mfr 182e , 1.2 k, resistor mfr , 50e, mfr 0.25 , 10k, mfr, 0.25 , 2.2 k, mfr, 0.25 , 15 k resistor, smd , 1 k resistor, mfr , resistor, mfr 4 k 70 0.25 w , 330 e , mfr,0.25w , ladder 4.7k , 12 k resistor, mfr , 10 resistor , 1k resistor 4x2 pin array , 2.4k resistor, smt , 4.7k resistor matrix , 7,5k resistor , 0r33 ohm 0r33 resistor , 3.6k resistor , 22k resistor , resistor 470e , 240 ohm resistor , 4,7k, 0.25w , 6.8 k resistor , 8.2k, 0.5w , 12.4 k resistor , 1e, resistor mfr , resistor 3.9k , 2k, mfr, 0.25 , 20k, 0.5w , resistor 82e, mfr,1w , resistor 0.05e , 100k, mfr, 1w axial leaded , inductor, 100uh dcr , blm21pg221 ferrite , resistance 1k ohm , transistor mmbt4403 , 100 micro haneery , resistor, mfr 330e

Central Government/Public Sector

CTN :41541880

01 Sep, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of procurement of antenna array for radar

Central Government/Public Sector

CTN :41540607

12 Sep, 2025 NA

Junagadh - Gujarat

Tender For supply of hplc with diode array and fluorescence detector

CTN :41541244

24 Sep, 2025 NA

Ernakulam - Kerala

Tender For supply of development of expendable directional active sonobuoy transducer array , supply of expendable directional active sonobuoy transducer array

CTN :41540685

06 Sep, 2025 NA

Jharsuguda - Odisha

Tender For supply of rooftop mounting structure , sun shine recorder , weather monitoring station , solar cell based , photo voltaic cell , solar simulator , iv curve tester , sun path finder , solar energy trainer , solar tracker kit , solar pv elearning , halogen lamp , motorized bench grinder , battery charger , solar photovoltaic module , solar panels , solar charge controller , solar charge controller manual , array junction box , solar lantern , solar lantern assembly , home light system , solar cell kit , dc led lamp , dc pump , pwm controller , mppt charge controller , solar pcu , solar grid tied , solar street light , solar wind hybrid , solar traffic light , used water treatment , solar dc pump , demonstration kit generation wind turbine

CTN :41208835

25 Aug, 2025 6.83 Lacs

Guntur - Andhra Pradesh

Tender For corrigendum : purchase of office furniture and other allied items - mingle modular plt conference table 14 seating head - w:1800mm x d850mm x h:740mm , 2str : w:1350mm x d:600mm x h:740mm, 1str : w:675mm x d:600mm x h:740mm work surface:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. plastic abs access flap is provided for easy access to wires and cables. work top is available in various shapes as shown above understructure:it consist of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. aluminium alloy 63400 - wp profile is used for connecting panels together. the product has a knock-down construction modesty panel made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. powder coated accent metal strip provided below work surface to enhance aesthetics. it is made of 0.8mm crca as per is 513,epoxy polyester powder coated (dft 40-60 microns). wire management - an array of panels made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns) is used for flow of wires and cables. provision to mount anchor roma 6 module plate is provided below worktop. cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop. accessories are provided for adding functionality to the products. document shelf is made of 1.2mm crca ms is:513 and is epoxy polyester powder coated (dft 40-60 microns). it is to be used for storing papers and accessing them quickly. hdmi wire cover is made of 0.8mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). hdmi holder is made of 2mm crca ms is:513, epoxy polyester powder coated (dft 40-60 microns). the hdmi wire cover along with hdmi holder (part of same packet) to be booked for every provision for hdmi connection as per customer/av team requirement (except in head and corner module). name plate is provided to display the name of person and consists of two plates - inner and outer plate. they are made of 1.2 mm aluminium sheet and 2mm aluminium sheet respectively. they are tack welded to each other using tungsten inert gas welding. the name plate is epoxy polyester powder coated (dft 40-60 microns). product certificates : test certificate, indoor advantage™ gold, griha and greenguard., mingle unitized plt_10 seater st w:3000mm x d:1150mm x h:740mm work top:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. access panels provided with soft closing hinges. understructure:the under-structure consists of mixture of 25mm and 18mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping. anodised aluminium alloy 63400 - wp profile is added at bottom edges for improving the aesthetics. the product has a knock-down construction. wire raiser:a wire raiser made of 0.8mm crca ms is:513. it is epoxy polyester powder coated (dft 40-60 microns) for flow of wires and cables. cutout provision below access flap at two locations for standard 8 module anchor roma is provided. beside each cutout, an additional cutout with plate is provided for mounting audio visual cables (eg.hdmi, vga-a,etc)., thrill mesh plus highback chair seat/back ass embly: the seat is made up of 1.5 ±0.1 cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the seat has extra thick foam on front edge to give comfort to popliteal area. the back is injection moulded in glass filled polypropylene which is upholstered with mesh fabric. the back consist of adjustabl

Electric Controller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector