Latest electric motor pump Tenders | Government electric motor pump Tenders

State Government

CTN :42989146

05 Dec, 2025 23.63 Lacs

South Tripura - Tripura

Tender For fdr/ r/mtc. of rws/arws/nrdwp/jjm schemes/s.h:- supplying, removal, washing & refilling of specialized filter media (graded sand, gravel, anthracite & manganese dioxide) for package type irp, including allied high-value electro-mechanical components (butterfly valves, diaphragm valves, blower & compressor motors, metering pump, mccb, star-delta starter, etc.) at different dtw schemes of manubazar sector under satchand rd block within the jurisdiction of dws sub-division, sabroom during 2025–26. (gr-ii)

State Government

CTN :42989147

05 Dec, 2025 24.18 Lacs

South Tripura - Tripura

Tender For supplying,removal,washing and refilling of specialized filter media for package type irp, including allied high-value electro-mechanical components at manubazar sector under satchand rd block within the dws sub-division,sabroom during 2025-26.(gr-i) - fdr/ r/mtc. of rws/arws/nrdwp/jjm schemes/s.h:- supplying, removal, washing & refilling of specialized filter media (graded sand, gravel, anthracite & manganese dioxide) for package type irp, including allied high-value electro-mechanical components (butterfly valves, diaphragm valves, blower & compressor motors, metering pump, mccb, star-delta starter, etc.) at different dtw schemes of manubazar sector under satchand rd block within the jurisdiction of dws sub-division, sabroom during 2025–26. (gr-i)

Central Government/Public Sector

CTN :43000647

29 Dec, 2025 NA

Cuddapah - Andhra Pradesh

Tender For supply of ammonia compressor spares> - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50 ), ferrule (pa

Central Government/Public Sector

CTN :42996612

05 Dec, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs rajdhwaj; e-80,83,84,87,89; service provider - both ac compressor lp, hp, op copper gauge line. all copper gauge line to be replaced for satisfactory operation of ac system. length 20meter, dia-5mm.cold lagging of ac system in ahu compartment, lp line and accumulator found peeled off at various places. same to be replaced for satisfactory operation of ac system. area 18 square meter.01 in no. fot pump in forward engine room intermittently not taking suction. repairing/overhauling of fot pump to be carried out and pump to be proved for rate output.

Central Government/Public Sector

CTN :42996637

05 Dec, 2025 1.36 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs rajdhwaj; e-90 to e-91; service provider - both ac compressor lp, hp, op copper gauge line. all copper gauge line to be replaced for satisfactory operation of ac system. length , 20meter, dia- 5mm. , scold lagging of ac system in ahu compartment, lp line and accumulator found peeled off at various places. same to be replaced for satisfactory operation of ac system. area 18 square meter. , 01 in no. fot pump in forward engine room intermittently not takingsuction. repairing/overhauling of fot pump to be carried out andpump to be proved for rate output.

CTN :42996563

16 Dec, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of oil pump belt spz 875 , compressor belt vsx 2096 l10 , elastic ring 391 , toroidal gasket r 28 , toroidal gasket r 21 , toroidal gasket r 22 , spare parts kit for 160h , spare parts kit for 320h , washer skf mb5 , elastic ring 48e , ball bearing adr 6002z , differentialgaugetype 7420b , valve 14g dn8 , solenoid valve connector pg9 , drying agent , solenoid valve g14 250b , dew point sensor , 1st stage suction discharge , pinions kit , 3rd stage suction , 3rd stage discharge , 4th stage suction , 4th stage discharge , 2nd stage suction discharge , retainer of the connecting rod ball joint , connecting rod ball joint , cross head seat , retainer of the connecting rod ball joint , 3rd stage cylinder head , 4th stage cylinder head , plain bearing , balancing screw , element , hose kit , 1st stage draining hose , 3rd stage drainage hose , 2nd & 4th stages drainage hose

Central Government/Public Sector

CTN :43022667

12 Dec, 2025 2.05 Lacs

Santaldih - West Bengal

Tender For repairing of spring leaf recambering all sides, gear box assly, clutch assly, steering assly and pto pump and compressor overhauling and repairing with reqd. spare of hyva regd no-jh10ad-7094 at bcw.

CTN :43022495

13 Dec, 2025 40.8 Thousand

Jalpaiguri - West Bengal

Tender For supply of tensioner belt , pump water , air compressor rep kit , air compressor assy , air dryer kit , cable assy control , park kit brake chamber , assy hose , tapper roller brg , wheel cyl assy rear

CTN :42998115

11 Dec, 2025 NA

Faridkot - Punjab

Tender For supply of pilot brg , compressor , compressor head gasket , tie rod end , feed pump assy , sleeve cyl assy

CTN :42996571

11 Dec, 2025 NA

Haridwar - Uttarakhand

Tender For providing of design installation and maintenance of educational lab/centre - science lab; mechanical lab; buyer - apparatus for verification of law of parallelogram, appratus for polygon law of forces, apparatus for verification of reaction of simply supported beam, apparatus for jib crane, apparatus for inclined plane, apparatus for screw jack, apparatus worm and worm wheel, apparatus for single purehase crab, impact testing machine, torsion testing machine, centre of gravity apparatus, rockwell hardness tester, muffle furnance, two stroke petrol engine model, four stroke petrol engine model, carburator cut section model, actual compressor cut section, condenser cut section model, reaction steam turbine cut section model, impulse steam turbine cut section model, high pressure steam boiler cut section model, lamount boiler cut section model, petrol engine cut section, diesel engine cut section, manometer, venturimeter, bernoulli's appratus, orifice meter, pipe friction appartus, pelton wheel, francis turbine, vernier callipers outside micrometer, inside micrometer., vernier height gauge, vernier depth gauge, dial gauge indicater, combination sel, bevel protector, slip gauge, sine bar, measuring temperature by thermocouple., surface plate, lubrication equipment, clutch plates (cut section mode, suspension system (cut section model), fuel injection pump (cut section model), air conditioning system cut section model

Electric Motor Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector