Latest electric pump scrap Tenders | Government electric pump scrap Tenders

State Government

CTN :37916756

27 Nov, 2024 1.15 Crore

Pathanamthitta - Kerala

Tender For corrigendum : deposit work- manneera- peruvali water supply scheme construction of 6m dia- intake well cum pump house g l sump, booster pump houses, pressure filter and distribution net works with over head tank at thalamanam- etc.

Central Government/Public Sector

CTN :38192764

21 Nov, 2024 NA

Hubli - Karnataka

Tender For supply of grease gun of capacity 20 kg with hose and accessories . the specifications are (1). heavy d uty type bucket grease pump with trolley. (2). capacity of the drum minimum 20 kgs. (3). handle with whe el mounted trolley to easy operation and transportation. (4). pump has steel constructions. (5). with cast h ead and strong rigid steel pump piston and chambers. (6). length of 2.2 to 2.5 m high pressure wire braide d ,oil resistant hoses fitted with accessories. (7). nozzle dia: 3/8 inch. (8). complete set supplied with repair kit one set. (9). additional grease gun steel extension straight type, length-200mm to be supplied separate ly . (10) grease pump should be hand operated. (11). warranty: minimum 12months. (12)acceptable make: elgi/groz/ingersoll rand/preston or equivalent. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :38112346

02 Dec, 2024 NA

Delhi - Delhi

Tender For corrigendum : supply of oil injector pump complete suitable to build up hydraulic pressure up to 3000 kg/cm2 (44000 psi) with following acc essories (a) oil injection pump pressure capacity 43,500 psi or 3000kg/cm2 (b) pump bracket & special floor stand with telescopic slide (c) feeder bottle and handle (d) high pressure flexible tubing with adopter nipple (e) pressure gauge (0-3000(bars). [ warran ty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38209388

02 Dec, 2024 NA

Delhi - Delhi

Tender For supply of oil injector pump complete suitable to build up hydraulic pressure up to 3000 kg/cm2 (44000 psi) with following acc essories (a) oil injection pump pressure capacity 43,500 psi or 3000kg/cm2 (b) pump bracket & special floor stand with telescopic slide (c) feeder bottle and handle (d) high pressure flexible tubing with adopter nipple (e) pressure gauge (0-3000(bars). [ warran ty period: 30 months after the date of delivery ]

State Government

CTN :38199144

04 Dec, 2024 NA

Surinsar Mansar - Jammu And Kashmir

Tender For supply of piston ring standard 0312bab01510m , piston standard 04 nos , piston lock , piston pin , cylinder lining sleeve 0302ab0450n , cylinder lining o ring 0084054 0084055 , bigan bearing standard 0084250 , crank thrust standard 7932566164 , crank main oil seal front 0311ab0280n , crank main oil seal rear 0311ab0270n , engine overhauling gasket 0311aab00520n , valve exhaust 0310db0030n , valve inlet 0310db0040n , valve oil seal 0051345 , crank sensor 0305cab00061n , came sensor 0315cab00101n , water temperature sensor 0315cab00091n , guide valve stem 0051894 , valve push rod 0051503 , water pump assembly mv0304eb0390n , speed sensor 1302aaa01411n , water pump gasket 0304eb0190n , exhaust manifold gasket 0302db0130n , stud both end 0024014 m10x1 point 5x30x36 , gasket exhaust flung turbo 0024018 , flanged clinch nut 57080a0050n m8x1 point 25 , egr pipe gasket 0022672 , egr valve padmini 30mm 0309dab0050n , hose clamp 2 and half inch worm type 0036031 , hose air manifold side 0313aab02560n , hose air turbo side 0313ab0150n , gasket cup thermostat 0311bb0010n , washer seal rocker cover 0091041 , gasket thermostat hsg 0311ab0050n , radiator assembly 0304aab00911n , oil pump assembly 0303aab00520n , sealing tube 0502caa01640n , fuel line venturi to fip 1001caa12110n , venturi assembly 0305dab00551n , main fuel line 1001caa12040n , hose assembly heater inlet 1202da0810n , hose assembly heater outlet 1202da0800n , hose radiator outlet 0304db0280n , hose radiator inlet 0304db0570n , thermostat hosing assembly 0304eb0680n , pressure cap radiator 0304ab0230n , hose clip sf0103067 m55x0 point 46x14 point 5 , outer door handle right side 0114dn0130a , outer door handle left side 0114dn0120a , front door rubber beading inner right and left side 0067719 , rear door rubber beading inner right and left side 0067741 , tail door rubber beading inner 0067742 , door left side mirror 0109ban00121n , nozzle o ring bid details/ 2 / 52

corporations/Associations/Others

CTN :38182325

19 Nov, 2024 NA

Multi City - Multi State

Tender For auction sale of scrap cut thread rubber pieces,scrap lot consisting of office old records,scrap auto grade-i,scrap inter cooler all type (loc-inside gowdown),scrap radiator all type (loc-inside gowdown),scrap door cylinder (loc-inside gowdown),scrap electrical horn (loc-inside gowdown),scrap aluminium bend pipe,scrap rear brake chamber (inside gowdown),scrapped bench grinder as is where is condition,scrapped battery charger (elak and tiger make),scrapped monoblock pump etc,scrap sump motor (sub well motor),scrap sub mersible pump 4.5,scrap induction motor etc,scrap sub mersible pump motor 4.5,scrap sewing machine motor,scrap welding machine oil etc,scrap co2 welding machine colton,scrap welding machine oil cooled,scrap geared motor 1 hp,scrap alternator 25 kva,scrap smoke meter indus,scrap bar light system - 02 nos, battery load tester.,scrap feeder machine for co2 welding machine,scrap industrial wall mounted fan,scrap tyre pressure unit,scrap oxygen and acetelyn regulator etc,scrap 0.5 hp induction motor etc,ms scrap with or w/o aluminum attachment,scrap empty plastic cans of 5 ltr., capacity lot,scrap wood & dencified wooden floor pieces,pistons without connecting rod,scrap lot consisting of bvc/paint tin,scrap gear box bel housing

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

corporations/Associations/Others

CTN :38184961

22 Nov, 2024 2.94 Lacs

Bankura - West Bengal

Tender For procurement of spares for chemical dosing pumps - plunger pl d35mm spares for morpholin dosing pump model mc2rl sl no 3492 3493 3749 3750 , plunger pl d30mm spares for hydrazine dosing pump model mc2rl sl no 3490 3491 3747 3748 , drive shaft of hydrazine dosing pump part no 25 pa 04 model mc2rl , spacer of hydrazine dosing pump part no 25 pa 05 model mc2rl , cross head pt no 35 pa 16 for p d pumps mod no mc3rl , eccentric 35 pa 13 spares for phosphate dosing pump model mc3rl sl no 3494 3495 3751 3752 , connecting rod 35 pa 15 spares for phosphate dosing pump model mc3rl sl no 3494 3495 3751 3752 , cross head pin 35 pa 17 spares for phosphate dosing pump model mc3rl sl no 3494 3495 3751 3752 , drive shaft for phosphate dosing pump part no 35 pa 04 model mc3rl , plunger ring pi d20 mm spares for phosphate dosing pump model mc3rl sl no 3494 3495 3751 3752 , teflon washer for valve 35 pb pr 01 spares for phosphate dosing pump model mc3rl sl no 3494 3495 3751 3752 , plunger pl d 20mm spares for phosphate dosing pump model mc3rl sl no 3494 3495 3751 3752 , worm wheel for morpholene pump cap 65 lit per hr pressure 30kg per cm2 part no 25 pa 06 , control shaft for morpholene pump cap 65 lit per hr pressure 30kg per cm2 part no 25 pa 21 , guide pin 25 pa 14 spares for morpholin dosing pump model mc2rl sl no 3492 3493 3749 3750 , bearing retainer for morpholine dosing pump partno 25 pa 30 , lock nut for morpholine dosing pump partno 25 pa 23l , control housing for morpholine dosing pump part no 25 pa 20 , retainer washer for morpholene cap 65 lit per hr pressure 30kg per cm2 part no 25 pa 31 , connecting rod 25 pa 15 spares for morpholin dosing pump model mc2rl sl no 3492 3493 3749 3750 , crank 25 pa 12 spares for morpholin dosing pump model mc2rl sl no 3492 3493 3749 3750 , control screw bush for morpholine dosing pump part no 25 pa 35l , teflon washer for valve 25 pb pr 01 spares for hydrazine dosing pump model mc2rl sl no 3490 3491 3747 3748 , thrust ring phosphate pump cap 100 lit per hr pressure 200kg per cm2 part no 35 pa 18 , control shaft for hydrazine pump cap 45 lit per hr pressure 30kg per cm2 , worm wheel for hydrazine pump cap 45 lit per hr pressure 30kg per cm2 , worm shaft for hydrazine pump cap 45 lit per hr pressure 30kg per cm2 , thrust ring for hydrazine pump cap 45 lit per hr pressure 30kg per cm2 , plunger ring pi d30mm spares for hydrazine dosing pump model mc2rl sl no 3490 3491 3747 3748 , cross head for hydrazine dosingpump model mc2rl part no 25 pa 16

CTN :38185019

03 Dec, 2024 NA

Nashik - Maharashtra

Tender For supply of mt spares - speedo sensor , clutch release brg , fan belt , driven disk and cover assy , water pump assy , d aeration tank , spring brake chamber kit , nut , ball joint small , ball joint big , gear lever kit , clutch cyl rep kit , sleeve cyl rep kit , oil filter , fuel filter , water separator , clutch release big , clutch plate , clutch cable , clutch plate and pressure plate , release brg , gear box oil seal , sleeve cyl assy , clutch cyl assy , chain sprocket , cable assy spoeedo

CTN :38198295

04 Dec, 2024 NA

Leh - Jammu And Kashmir

Tender For supply of stove no-3 , stove valve , lid for stove , katori for stove , wick for stove , burner , pump no-3 , pump no-4 , washer for burner , pump washer no-4 , pump washer no-3 , pencil cell , thermos 2 ltr , extention cord , pressure cooker 5ltr united , clamp for gas pipe , pressure cooker gas kit

Electric Pump Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors