Latest electric traction elevator Tenders | Government electric traction elevator Tenders

Central Government/Public Sector

CTN :43547703

31 Jan, 2026 NA

Raigad - Maharashtra

Tender For tender for supply of bar polished ss 304 , 12mm. , round bar aisi304 dia20mm , barroundssais1304 dia25mm , ss round bar 50 mm dia 304l , ss round bar 3 inch dia 304l , ss round bar 4 inch dia 304l , rod ss 316 1inch dia , round bar 2inch em24 6 m , round bar ss 304l dia. 40 mm , length , round bar ss 304l dia. 60 mm , lenght 6 me , round bar ss 304l dia. 80 mm , lenght 6 , round bar ss 316l dia. 40 mm , lenght 6 , round bar ss 316l dia. 60 mm , lenght 6 m , round bar , en8 size- 20mm dia. std length , round bar , ss 316l size 25mm dia. std len , round bar , ss 316l size 75mm dia. std len , round bar ss 304 , dia 6 mm length 3-4 me , round baren8 3/4inch dia , round bar 2 inch en8 20me l , round bar ss410 size 120mm , round bar 316l 2 inch , 5-6me l , round bar 1-1/2 inch en-8 , round bar 1inch en8 , pneumatic grinder , 4 inch , cp3450-12ac4 , mini pneumatic die grinder , cp 9107 , allen key set , 10 sizes- 1.5 mm to 12 mm , tool box with tools as annexure , paint remover sp-98-s4. , rust loosener spray cans tf-77 400ml , stanvac z 730 steelweld amm , measuring tape , 5 meter-metalic , pneumatic drill machine cp9792c , pneumatic reciprocating saw cp7900 , chain pulley block light wt. 1/2 t x 3 m , chain pulley block light weight 1t x 3me , chain pulley block-cap. 3ton , 4meter lift , chain pulley block light weight 5t x 3me , chain pulley block light weight 2t x 3me , d-shakle 0.5 mt , d.shakle scr 1 mt , d-shakle 2mt , d-shakle scr 3 mt , d-shackle 5 mt , d shackle 10 mt.cap , polyster flat belt sling 5mt x 6mtr , flat webbing sling , 1t x 2me , flat webbing sling , 2t x 2me , polyster webbing slings 5mt x 3meter , web sling 1t x 3 me , sling web.flat 2t x 3me l , sling wbb cap-2t , l-5me. , eye bolt 8 mm. , eye bolt m10. , bolts eye as m12. , eye bolt m14. , bolts eye as m16. , eye bolt m18. , bolts eye as m20. , bolts eye as m24. , eye bolt m27. , bolts eye as m30. , sling 0.5 t x1.5 m long. , chain pulley 1tx10 m cha , plier combination 8 inch , screw driver elec 12 in , s-dvr is849/1971 , screw driver insulation 8 inch , punch centre 3/16x4inch , tub spanner set 6-22mm , allen key 1.5 to 10mm , t handle with allen key , allen key 1/16 to 3/8 inch , hammer sledge 5p , hammer 1 kg with suitable wooden handle , chisel cold flat 5/8 inch x 6 inch , chisel cold 3/8 x 6 inch , chisel cold 3/4 inch x 8 inch , wrench adj.34x300mm-12 inch , slide wrench size- 6 inch x 3/4 inch , box spanner set , nose plier 8 in , line tester elect 500v , d spanner set double ended 6mm to 22mm , spanner ring double ended size 24/27 mm , scr dvr set taparia 812 , ring spanner sets 6mm to 22mm , allen key 5.0 mm , allen key 6.0 mm , pipe wrench 12 inch -300x4 , pipe wrench 18 inch -450x6 , wire stripper for removi , hacksaw frame , 12 inch , hacksaw blade , 12 in , hss , hacksaw frame , 6 inch , hacksaw blade , 6 inch , tubular spanner 12 x 13mm , measuring tape 50me , carbide drill bits 4.0 mm , carbide drill bits 5.0 mm , carbide drill bits 6.0 mm , carbide drill bits 7.0mm , carbide drill bits 8.0 mm , electrician tool bag , polyster , wtrprf , aluminium tags for tagging as per sample , rtv silicone sealant , digimatic vernier caliper , 12 inch , vernier caliper 0-300 mm , measuring tape , 5 meter-metalic , luxmeter (range-0-50000 lumens) , hammer drill machine 13mm , soldering wire lead composition , soldering flux 500 gr , cordless portable drill machine , drill machine kpt -561 upto 10mm 240vac , brush painting 3 inch width , heat sink compound paste , outside micrometer , 0-25 mm , flat / flat , union ct ss304-6mm odtube , tee male ss304 1/4 inch nptx6mm odx6mm od , male connector 1/4 inch nptm x 6 mm od tube , tee 6mm od tube with singal ferrule , con fmle ssnpt1/4 inch x6mm od , conn male ssnpt 1/4 inch x6mm , elbow90 1/4 inch npt6mmss304 , ss316 6mmx1/4 inch nptm elbow male connector , conn ss 1/2 inch npt(m)x6mm od , conn ss 1/2 inch npt(f)x6mm o , wsi-plug hex head ss 316 , 1/8 inch npt(m) , ss316 6 mm od x 1/8 inch npt male connector , n

CTN :43516630

16 Jan, 2026 4.62 Lacs

Kolkata - West Bengal

Tender For maintenance of electrical installation & fans i/c compound light, repair maintenance of pump sets, dg set, sub-station, lift, ac machine, fire alarm and cctv at positional astronomy centre, salt lake city, kolkata during 2025-26. (sh- replacement of damaged fire alarm panel & other accessories of fire alarm system)subwork/packages:replacement of damaged fire alarm panel & other accessories of fire alarm system

Central Government And Public Sector

CTN :43290626

15 Jan, 2026 NA

Karimnagar - Telangana

Tender For corrigendum : supply of rotary scrapper motor , ptc and wlc motor , lift main motor , ptc and wlc 11 kw motor , prilling bucket motor , flat conveyor motors , slat conveyor motors , bag transfer conveyor , wlm shuttle motion motor , wlm bag receiving conveyors , boggie shuttle motion motor wlm , boggie shuttle motion motor tlm , bag turner motor , telescopic tlm motor , luffing motion tlm , neem oil spray pump , stitching machine motor , lift brake motor , de 1 and 2 rav motor , de 3,4 and 5 rav motor , eot main hoist motor , bcr hvac bry air motor , ss7 hvac bry air motor

Central Government/Public Sector

CTN :43436566

14 Jan, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of scissor lift machine

corporations/Associations/Others

CTN :42485358

21 Jan, 2026 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

21 Jan, 2026 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

CTN :43521661

24 Jan, 2026 NA

Pondicherry - Pondicherry

Tender For supply of dental equipments and instruments d d - chairside cadcam , confocal microscopy , automated cell imaging system , ten-headed teaching system , porcelain furnace porcelain furnace programmable with vacuum pump and instrument kit and material kit for all ceramic , claro nav system navigation system , porcelain furnace programmable with vacuum pump and instrument kit and material kit for metal ceramic , triple wavelength laser , harmonic surgical knife , surgical endodontic microscope , dental casting machine motorised , casting machine , ergonomic dental chair beach technique , software for cephalometrics model analysis , cad cam digital 3d printer , cad software , t-scan novus , surgical instruments , preclinical prosthetics working table , rmo 660xp multipurpose welder with ce safety standards uk model plug with 220 250v , ventilator , portable dental chair , dental implant advanced kit sinus lift kit , florida pressure sensitive probe , saf file with rdt handpiece , orthodontic mobile instrument carts , intraoral scanner , de-waxing unit , ultrasonic scalers , unit mount scaler , fully adjustable articulator , implant kit with both surgical and prosthetic components , intubation endoscope fibreoptic , tmj arthroscope , operating microscope ) /bid number : gem/2026/b/7072661 * /dated: 09-01-2026 & & / bid document 1 / 35

Central Government/Public Sector

CTN :43161638

14 Jan, 2026 48.00 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : repair / maint of lift well, shaft, machine room and connected items for nsb, ins dega, circars and eksila areas under of ge (u-i) visakhapatnam

CTN :43516658

16 Jan, 2026 3.90 Lacs

Kolkata - West Bengal

Tender For maintenance of electrical installation and fans including repair maintenance of pumpsets, compound light, substation, a.c. machine, lift at positional astronomy centre, salt lake, kolkata during 2025-26 (sh: s/f of auto rescue device controller & new door header, door motor, vf controller for lift car door & other accessories for lift no 1 at pac, salt lake, kolkata).subwork/packages:s/f of auto rescue device controller & new door header, door motor, vf controller for lift car door & other accessories for lift no 1 at pac, salt lake, kolkata