Latest electrical circuit breaker Tenders | Government electrical circuit breaker Tenders

Central Government And Public Sector

CTN :40904453

11 Jul, 2025 NA

Nagpur - Maharashtra

Tender For supply of rewirable type fuse unit complete grip with base made up of porcelain. contacts are made of electrolytic copper & silver plated, the fixed contacts are provided with removable shield. fuses are 240v/ 4 15v ac, current rating 100 amps. as per conforming to is : 2086/1993. [ warranty period: 30 months afte r the date of delivery ]

CTN :40888785

28 Jul, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of fuse hrc porcelain complete assly. with fuse base for front connection, fu se link 35 amps 500v ac for ccba (quick action duty type d-iii with alternative shape) fus e carrier gauge piece & collar ring to is:8187 of 1976 c&d no. 5111/f-341/654 and 902. [ w arranty period: 30 months after the date of delivery ]

CTN :40905317

07 Jul, 2025 NA

Liluah - West Bengal

Tender For switch fuse unit,rated current 100 amp,three phase,triple pole with neutra l link,weather proof,metal clad,air brake,utilization category ac-23a,degree of protec tion ip-2l3,conforming to is or iec60947(part-i/2004)&is or iec60947(part-3/1999)with posi tive make & brake arrangement,suitable for three phase 415 volts,50 hz ac supply with i nter-lockable cover & rewire able type porcelain fuse units conforming to is:2086/1993 (3rd revision)reaffirmed 2004 with amend.no.1 & having cable entry holes,sealing & mou nting arrangements. [ warranty period: 30 months after the date of delivery ]

CTN :40902106

10 Jul, 2025 NA

Kalyani - West Bengal

Tender For supply of switches with tpn main - 32 amps, make-flora, 32a tpn main switch(ictpn) with porcelain fuse & enclosu , tpn main switch, 63 amps, 440v, make-flora, 63a tpn main switch(ictpn) with porcelain fuse & enclos

Central Government/Public Sector

CTN :40888420

08 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For supply of rewireable type porcelain fuse unit with base and carrier, current rating: 63 amps, voltage : 415 vac, confirming to is:2086 -1993, rev-3, warranty: 1 year, make: gec, havells, kundan, anchor, benlo, c&s, oswal, hpl,gic, gem, anchor only accepted. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40554515

14 Jul, 2025 NA

Kheda - Gujarat

Tender For supply of various types of power & control fuse at wtps, gsecl. - hrc fuse 2 amp for one to one replacement of ee make type ns 2., hrc fuse 4 amp for one to one replacement of ee make type ns 4., hrc fuse 6 amp for one to one replacement of ee make type ns 6., hrc fuse ns10, rating 10 amp., hrc fuse 16 amp. type ca1/ ns, e.e.make hrc fuses 25amp type-ns-25, hrc fuse 16 amp for one to one replacement of ee make type tia-16., hrc fuse 25 amp for one to one replacement of ee make type tia-25., hrc fuse 32 amp for one to one replacement of ee make type tia-32., hrc fuse link tia-50, 50 amp, hrc fuse link tia-63, 63 amp, din type fuse link 16ampx415v type size-00, din type fuse link 25ampx415v type-size-00, din type fuse link 32ampx500v/415vx80ka-ty nh00, hrc fuse 36 amp vsb 36,ee make (gec altron), din type fuse link 50ampx415v type size-00, hrc fuse (din type) 500v ac, s.c. breaking capacity 120ka, size-00, rating 125 amp, type:- 3na3 832 - 7y . siemens make, din type fuse link 63ampx415v/500vx80ka nh 0/1 typ, din type fuse link 80ampx415v type size-1, din type fuse link 125ampx415v type-size-1, hrc fuse 200 amp for one to one replacement of siemense make din type 500v ac s.c. breaking capacity 120ka size-1 rating 200 amp type: 3na3 140 - 7y., siemens make fuse base ( din ) 250 a rated type 3nh3-230, simence make hrc fuse (din type)500vac /120 ka400 amp 3na3 lv hrc fuse link , nh2 ,3 na3 260 - 7y, hrc fuse 2 amp."d" type 500 vac bl make, hrc fuse 4 amp."d" type , 500 v ac, hrc fuse 6 amp " d " type , 500 vac, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, moulded bakelite fuse fittings , 2 amp to 16 amp , type ns h , e.e. /g.e. make ,440 v ac 5 , bs 88 (bottom& top ), moulded bakelite fuse fittings , 32 amp , type sm-32 h , e.e. /g.e. make ,415 v , (bottom& top ) , is 9224 part i, moulded bakelite fuse fittings , 63 amp , type sm - 63 h , e.e. /g.e. make ,440 v , (bottom& top ), hrc fuse 6 amp for one to one replacement of l&t make type hf cat no 90146., hrc fuse 16 amp for one to one replacement of l&t make type hf cat no 90150., l&t hrc fuse link hf-32 amp,500 v,sf-90142, fuse base type hco suitable for hf- 32 a fuses, hrc fuse 6 amp for one to one replacement of siemense make din type 500v ac s.c. breaking capacity 120ka size-000 rating 6 amp type:- 3na3 801 - 7y., hrc fuse 32 amp for one to one replacement of siemense make din type 500v ac s.c. breaking capacity 120ka size-000 rating 32 amp type 3na3 803 - 7y., moulded backelite fuse base/top for 415 volt a.c.50 hz.suitable for 02 to 32 amp ns type fuse link. list no- nsh and code reference no-sff8111000 of g.e make.bs type fuse holder., hrc fuse 25 amp for one to one replacement of siemense make din type 500v ac s.c. breaking capacity 120ka size-000 rating 25 amp type: 3na3 810 - 7y., hrc fuse (din type) 500v ac, s.c. breaking capacity 120ka, size-1, rating 63 amp, type:- 3na3 122 - 7y . siemens make, hrc fuse 63 amp for one to one replacement of siemense make din type 500v ac s.c. breaking capacity 120ka size-000 rating 63 amp type: 3na78220rc, hrc fuse 80 amp for one to one replacement of siemense make din type 500v ac s.c. breaking capacity 120ka size-000 rating 80 amp type: 3na3 824 - 7y., e.e.make fuse link 630a/500v/80ka/g-ii/vst/630 size 3 skd 8350630, rating-315 amp,size-1 ,breaking capacity-100 ka ,voltage-415 v ac,mounting-din type blade contact with indicator for fuse failure. utilization category-gg, rating-250 amp,size-2 ,breaking capacity-80 ka ,voltage-500 v ac,mounting-din type blade contact with indicator for fuse failure. utilization category-gg, hrc fuse 100 amp for one to one replacement of ee make type vsb-100., cylindrical hrc fuse 2 amp, voltag-500v,class of operation-gg, breaking capacity 120ka, size 10x38., cylindrical hrc fuse 4 amp, voltag-500v,class of operation-gg, breaking capacity 120ka, size 10x38., cylindrical hrc fuse 6 amp, voltag

State Government

CTN :40859188

07 Jul, 2025 8.94 Lacs

Kolkata - West Bengal

Tender For supply and delivery of 12 nos lt feeder pillar boxes with 2 nos incoming and 2 nos outgoing consisting of 2 nos lt inter connector 500a and 6 nos porcelain cut-out fuse unit 300a under bidhannagar-i division

Central Government/Public Sector

CTN :40809798

02 Jul, 2025 NA

Ranipet - Tamil Nadu

Tender For supply of smc dt metering box in 63kva, box size dimensions- h=700mm, w=480mm, d=210mm, thi ckness of box= 3.5+-5%, color - off white, general tolerance- 10%+_. with internal accesories (200a 415v porcelain kit ket fuse 04nos). the meter box is crafted with anti corrosive, rust proof, dust proof, waterpro of, uv protected and flame-retardant high-grade material that should have great dielectric adn mechanical strength properties. made out of moulding compound by process of hot press compressing moulding, confir ming to is:13410.240x190x4 mm wooden board for fixing meter., 600x400x4mm hylam sheet for meter & f use mounting,32mm pvc gland 03nos with dummy. removable frp angle for sheet mount, mbx40 gi eart hing bolt with 02nut, 2 plain washer .1 spring washer. 20nos on both side with inside wire mesh, cable hol ding clamp -02nos outside. rubber gasket for waterproof. 04nos door closing clamp, foldable handle 1nos, , mszp box mounting flat 02nos per box. mszp pole clamp 02nos per box. acceptable bra nd-epp, sintex, havells, l&t, c&s, indooasion, abb, hpl and similar make [ warranty period: 12 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :40809800

02 Jul, 2025 NA

Tambaram - Tamil Nadu

Tender For supply of smc box of size 150mm x 150mm x 100mm with 1 no of 6a strip connector, 16a p orcelain fuse carrier & 3 plate ceiling rose including locking arrangements . the strip connector, porcelain f use & ceiling rose to be fixed & pre-wired in smc box ready to use type. acceptable smc box make: sintex acceptable strip connector make: airon, legrand, jj enterprise, vcon, samtec, sj switchgears. acceptable p orcelain fuse make: anchor, havells, bussmann, kundan, sec, geco. acceptable ceiling rose make: anchor, havells, lyter, girish, gm, motowinn, orpat. ]

State Government

CTN :40772511

26 Jun, 2025 9.65 Lacs

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material, design, erection, testing, commissioning for providing s.o.p. to newly constructed residential building at nift campus chebb at kangra under esd no. i hpsebl, kangra. - (a) material/erection of 11/0.4kv,250 kva s/stn., prov.distribution transformer (ordinary), 11/0.4 kv, 250 kva, prov.steel tubular poles (9 m, working load > 200 kgf/m ), prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, prov.ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov.x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for transformer bed, prov.x-arm [channel iron (100x50x5 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (35x35x6 mm), length : (460 ) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov.go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov.d.o fuse unit, prov.surge arrester, 9 kv station class (porcelain type), prov.discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12kv, 90 kn) including dead end clamps etc.), prov.pipe earthing set, lt distribution panel box with mccb(630a, 50 ka, 3p,1 no) and mccb(250 a, 36ka, 3p, 3 no.), prov.half clamp (m.s. flat 50x6 mm), prov.full clamps (m.s. flat 50x6 mm), prov.nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], aluminium thimble, copper thimble 200 amp, danger plate, prov.barbed wire, prov.energy meter (3-phase,4-wire)dlms compliant 400/5a ct type, prov. aluminium paint., prov.aaac 7/3.15mm conductor for earthing, erection charges complete in all respect, transportation charges complete in all respect, (b)material/erection of 11 kv ht line, prov aaac 7/3.15mm conductor (50mm ) {includes cutting and wastage}, prov. steel tubular poles (9 m, working load > 200 kgf/m ), prov.m.s. c.i.x-arm (1500x100x50x5 mm), long for single pole, prov.m.s a.i x-arm (1800x50x50x6 mm), long for single pole, prov m.s a.i x-arm (50x50x6 mm), length (2x750) mm long for single pole, prov m.s a.i x-arm (50x50x6 mm),length (2x600) mm long for single pole, prov.m.s c. i cross arm (75x40x5 mm), length (2400) mm for g.o switch & d.o fuses, prov.belt set - ms a.i 50x50x6, length [2400 mm x 2 no.] for double pole, prov.x-bracing set - ms a.i 50x50x6, length [2700 mm x 2 no.]for double pole, prov 11 kv pin insulators (porcelain, 12 kv, 10 kn), prov disc insulator ,1 no disc (12 kv, 90 kn) including dead end clamps etc., prov ht earthing set complete, prov double continous earth wire (gi, 8 swg) @ 0.102 kg/m, prov danger plate (250x200x1.6 mm), prov nuts and bolts of various sizeswith flat and spring washers, prov barbed wire, prov aluminium paint, prov.full clamps (m.s. flat 50x6 mm), prov.xerox for chebb s/stn for scada, prov.d.o fuse unit, erection charges of 9 mtr st pole complete in all respect, erection charges of stay set complete in all respect, erection charges of coil earthing complete in all respect, erection charges of g.o. switch complete in all respect, erection charges of sagging aaac 7/3.15mm conductor, sagging of continous earth wire (gi, 8swg) @ 0.102 kg/m complete in all respect, transportation charges complete in all respect, commissioning of a 250 kva dtr plinth and fencing, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds o

Electrical Circuit Breaker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government