Latest electrical hardware Tenders | Government electrical hardware Tenders

Central Government/Public Sector

CTN :45064039

12 May, 2026 NA

Multi City - Multi State

Tender For supply of item 1 rotary encoder rcn 2381, id no: 1244623-01 power supply 3.6-14v output signal: 1vpp line count,item 2 adapter cable of rcn 2380 cable type: pur dia: 6.0mm, cable length: 1.00m coupling male 17

Central Government/Public Sector

CTN :42424475

04 May, 2026 NA

Kendujhar - Odisha

Tender For bid to ras supply of flexible copper trailing cables d d - item 10 , item 20 , item 30 , item 40 , item 50 , item 60 cable,trg,atc,3.3kv gr,3.5cx50mm2,is9968 size & tvpe 3.5cx50 sq. mm 3.3 kv grade flexible atc conductor of class-s, epr le-3, insulated &black hofr nbr pvc type se-4 sheathed flexible trailing cable suitable for reeling/un-reeling operation. cable type- flexible, standard: is 9968(part 2) 2002 d.c. resistance at 20deg. c (ohms/km) power core max- 0.393 earth core max - 0.795. annealing test in %- (before stranding) 13.5 %. per sulphate test in g/m2- max. 5.00. conductor screeninq power core only material approx thickness mm - extruded semiconducting compound/ extruded semi conducting tape- 0.80. conductor material: annealed tinned copper, 6.6 klv grade, cable type: flexible, standard: is 9968(part 2) 2002 tests on insulation thickness (nom) mm core ldentification - power core-2.20 colour rpct red, yellow & blue for power cores & green for earth core tensile strength before ageing n/mm2- min.4.20 % variation after ageing (air oven)- max. +-30% % variation after ageing in (air-bb)- max. +- 30%. elongation before ageing in % - min.200% % variation after ageing (air oven)- max. +- 30% % variation after ageing in (air-bb)- max. +- 30%. hot set test hot set elongation- 175% permanent set 15%. lnsulation resistance constant (min.) m ohm km. at 27deg.c- min. 3670 at 90 deg.c-min 3.67. thick of lnner sheath min 2.00 mm. rein forcement- open braid of textile material physical test on outer sheath thickness (nom) / min mm- 3.50/ 2.60 colour black, over all diameter of cable mm- 52.00+-3.00. tensile strength ) /bid number : gem/2025/b/6811700 * /dated: 24-10-2025 & & / bid document 1 / 22 before ageing n/mm2 - min. 11.0 at 2oo elongation 4n/ sq. mm. % variation after ageing in (air-bb)-max. +- 50% elongation before ageing in %- min.250% % variation after ageing in (air-bb)- max. + 50%. hot set test hot set elongation- max.175% permanent set- max 15. oil resistance test variation in % in tensile strength- max. +-40% variation in % in elongation-max. +-40%. tear resistance in n/mm - min.5.0. flammability test period of burning after removal of flame- max. 60 sec. min unaffected portion from the lower edge of the top clamp - min 50 mm. test high voltage at room temp- 10 kv ac for 4 hours. water absorption test increase in capacitance 1 to 14 days max- 6% 7 to 14 days max- 2.5%., control trailing cable 12 c x 2.5 3 p x 1.5 (pair screened) 2 voltage grade 1.1 kv 3 reference standard generally confirming to is: 9968 (part- 1)1998 4 conductor a. material to is:8130/84 annealed tinned copper b. nominal area of cross section(sq. mm) i)-unscreened core (sq. mm.) 2.5 ii) - screened pair (sq. mm.) 1.5 c. flexibility class as per is:8130/84 class-5 d. maximum dc resistance of conductor at 20 deg. c i)-unscreened core (ohms/km) 8.21 ii)- screened pair (ohms/km) 13.7 5 insulation i) material epr type ie-2 to is:6380/84 ii) nominal thickness (mm) 1.0 6 two cores of 1.5 sq. mm. size twisted together to form a pair yes. 7 individual pair screening each pair of 1.5 sq. mm. size taped with rpct, screened with 0.2 mm nom dia of annealed tinned copper wires braid, taped with melinex tape. yes. 8 no of cores / pair i)-unscreened cores 12 ii)-screened pairs 3 9 identification of power cores by number printing on cores. 10 laying up (i) three screened pairs laid up together, taped with rubber proofed cotton tape to form group as "a" (ii) 12 unscreened control cores laid up together around group as "a" of screened pairs and taped with rubber proofed cotton tape applied with open spiral. 11 inner sheath a) material to is: 6380/84 hd hofr csp type se-4 b) minimum thickness (mm) 1.6 12 an open braid of nylon cord reinforced in between inner and outer sheath. yes. 13 outer sheath a) material to is: 6380/84 hd hofr csp type se-4 b) nominal thickness (mm) 2.5 14 nom. overall diameter of cable (mm) 33.0 tolerance on nom. overall dia

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government/Public Sector

CTN :45049231

08 May, 2026 NA

Delhi - Delhi

Tender For supply of 2026-27 (ami no. 30.08) 2026-27 (ami no. 30.08) intravenous fat emulsion 20% fat infusion in the power of 250 ml or 500 ml (minimum energy content should be at least 1800kcal/1000ml inpack of 250ml or 500 ml bottle). [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :45049248

08 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of spike protector 230 v hz, 5a with 3 nos.5 pin socket and sheet metal cabinet as per thespecifications detailed. acinput voltage - 230 volts %b1 10%, 50 hz %b1 3% voltagedrop - 1 volt max clamping volts - 715volts rated peak current - 4500 amps ratedpulse - 75 joules response - lessthan 100 mano sec control - on/offswitch (5a rating) protection - fuseand circuit breakers foreach socket cabinet - sheet metal with powdercoating output terminal - 3 nos. of 5 pinsockets of each rated for 5 a noise filter - elcommake noise filter power cable - pvcpower cable with 3 pin 5 a, (cable shall be conforming to is: 694) size (l xb x h) - 265 x 80x45 mm (approx.) mounting - wallmounting (with 4 nos. screws) the item shall be equivalent to model no.pss-05/3a of m/s. prosys make or similar. note: 1. offers either from manufacturer or from authorized dealer shall only be considered. 2. thetenderer shall submit complete technical details of the item offered along with the offer for technical scrutiny. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45038313

18 May, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of power glidic-330 or servo c-3 sae-30 or torque converter oil, as per drawing: tes-122 type c-3 of detroit diesel alisan usa, hydraulic transmission fluids c-3 of m/s bharat petrolium, servo transmission c-3 sae-30 of m/s indian oil corporation,power glide c-330 of m/s hindustan petrolium. (item should be suitably packed in iron drum), quality plan: n.a. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44846089

06 May, 2026 94.44 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : supply of supplying of 1.5 tr nominal capacity invertor type metal body , installation, testing and commissioning of of 1.5 tr inverter type ductable air cooled split ac unit as per item no.1 above in equipment room , providing and fixing heavt duty powder coated m s stand of suitable size made out of suitable guage ms shee , supply and fixing of 3 core 2.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply and fixing of 4 core 1.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply installation testing and commissioning including vaccumiazation and nitrogen testing of , supply installation testing and commissioning including vaccumiazation and nitrogen , supplying and fixing of 25 mm sizes of rigid upvc piping from outlet socket of ac unit complete with elbow , supplying and fixing dp sheet steel enclosure on surface or recess along with 25 or 32 a 230 v c curve dp mcb , supplying and fixing 5 amps to 32 amps rating, 240 or 415 volts c curve miniature circuit breaker suitable for inductive load of single pole and neutral , providing and fixing supply air grills of powder coated aluminum construction having a free area of not less than 70 percent without volume control dampers , supplying and installing of 150 mm width 50 mm depth 1.6 mm thickness nominal size of perforated hot dipped galvanised iron cable tray

Central Government And Public Sector

CTN :45034533

14 May, 2026 NA

Damanjodi - Odisha

Tender For supply of e132779 cables for alternate vfd system for cable belt conveyor and suspended electromagnet d d - 1 . 82002094470 power cableayy3.5c x 150 sq.mm.1.1kvdetail specification refer to item no-01 of annexure-1. , 2 . 10101024340 steel braided pullkey cable.detail specification refer to item no-02ofannexure-1. , 3 . 82001096570 3c x 300 sqmm pvc insulated by sheathed armoured al. cabledetail specification refer to item no-03 of annexure-1. , 4 . 82013013020 4c x 2.5 sqmm multistrand armoured copper cabledetail specification refer to item no-04 of annexure-01. , 5 . 82060121170 intrument cable 12 pair 24cx1.5 sq.mm control cabledetail specification refer to item no-05 of annexure-01. , 6 . 82008401030 24c 2.5 sq mm single strand cupper control cable.detail specification refer to item no-06 of annexure-01. , 7 . 82060121310 6 pair shielded cable 1.5 detailed technical specification is attached in item no07 ofannexure-1.

CTN :44968345

02 Jun, 2026 NA

Izatnagar - Uttar Pradesh

Tender For corrigendum : supply of helical spring for high power dmu/dpc 1400 hp coaches (engine side) as per icf drg. no. dmu/dpc 5-0-1-501, item no. 2, alt-1 & nil', confirming to rdso spec. no. wd-01-hls-94, rev.4 of june. 22, material is: 3195/92 with amndt. no. 2. [ warranty period: 48 months after the date of delivery ]

CTN :45024205

19 May, 2026 NA

Ajmer - Rajasthan

Tender For supply of hydraulic power pack - hydraulic power pack k130 for 380v 50hz , no item a , no item b , no item c , no item d

Electrical Hardware Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors