Latest electrical spares scrap Tenders | Government electrical spares scrap Tenders

Central Government/Public Sector

CTN :45064039

12 May, 2026 NA

Haridwar - Uttarakhand

Tender For supply of item 1 rotary encoder rcn 2381, id no: 1244623-01 power supply 3.6-14v output signal: 1vpp line count , item 2 adapter cable of rcn 2380 cable type: pur dia: 6.0mm, cable length: 1.00m coupling male 17

Central Government / Public Sector

CTN :45066632

15 May, 2026 NA

Hyderabad-T - Telangana

Tender For rsp item no. 109/1193/2024-25: power supply card g2+vd 72-110/24 for faiveley make wsp system of lhb coaches as per ftrtil part no. ft0027545-100 [ warranty period: 36 months after the date of delivery ]

CTN :45066584

25 May, 2026 NA

Saran - Bihar

Tender For s.a. hydraulic tilting cylinder for electric annual rate contract furnace as per drawing no. rwp/m/mms/hyd/oe/2761m make - oscar,yuken,parker,hydac,aumtex india or fluid power. note:- firm has to develop item drawing as per sample and supply soft/hard copy of drawing along with material supply. [ warranty period: 12 months after the date of delivery ]

CTN :44844568

09 May, 2026 NA

Medak - Telangana

Tender For corrigendum : supply of third party inspection of 100 sets of turret electrical equipment kit-b 675- 95- cd3(item lf no: 8000 , third party inspection of 100 sets of hull electrical equipment kit-a 6795 -82- cb6000 (item lf no: 8 , third party inspection of 100 sets of power supply system 675-89-cd2 (item lf no: 8000089003) at firm , third party inpsection of 100 sets of gyro drift indicator (gpk-59) 127 ty part no. z-18/51-19-00- 000 , third party inspection of 100 sets of track assy 675-35-cd9 (item lf no: 80000350 04) at firm premise , third party inspection of 100 sets of filtering / ventilation unit 675 -71-cd6 (item lf no: 800007119 , third party inspection of 100 sets of water radiator 765-03-sb178 (item l f no: 8000003403) at firm p , third party inspection of 100 sets of ejector and air cleaner 675-10-cd2 item lf no: 8000010001) at fi , third party inspection of 100 sets of compressor plant 765-78-cb6 (item lf no: 8000078408) at firm pr , third party inspection of 100 sets of bmp smoke generating equipment 675-84- cd2 (item lf no: 8000084 , third party inspection of 100 sets of hull electrical equipment kit-b 675- 82- cd4 (item lf no: 80000 , third party inspection of 100 sets of nbc filter fat-200m imga 0001 (item lf n o: 8000299423) at firm , third party inspection of 100 sets of slip ring box bky-330-2 675-79-cd3 (item lf no: 8000079001) at , third party inspection of 100 sets of spring 765-33-cd107 (item lf no: 80000334 06) at firm premises , third party inspection of 100 sets of air pressure control unit 765-78-cd533 (i tem lf no: 8000078434 , third party inspection of 100 sets of rh manifold 675-10-cd120 (item l f no: 8000010076) at firm prem , third party inspection of 100 sets of lh manifold 765-10-cd693-01 (ite m lf no: 8000010483) at firm p , third party inspection of 100 sets of cooler oil vehicular 765-03-sb162 (item l f no: 8000003401) at , third party inspection of 100 sets of heater 675-71-cd152 (item lf no: 80000710 05) at firm premises , third party inspection of 100 sets of road wheel with solid rubber tyre 675- 33-c d104 (item lf no: 8 , third party inspection of 100 sets of machining of support roller (item lf no: 8 000033817) at firm p , third party inspection of 100 sets of electric motor mh-1 (item lf no: 80000066 80) at firm premises , third party inspection of 100 sets of filter assembly fluid 765-05-cd291 (item l f no: 8000005823) at , third party inspection of 100 sets of detent lock 675-10-cd114 (item l f no: 8000010114) at firm prem , third party inspection of 100 sets of gasoline centrifugal pump 765-05-cd121 (item lf no: 8000005412) , third party inspection of 100 sets of glow plug 765-06-cd409 (item l f no: 8000006409) at firm premis , third party inspection of 100 sets of reducing valve 765-06-cd308 (item l f no: 8000006472) at firm p , third party inspection of 100 sets of forged blank for hub 765-34-41 (item lf no: 7500034205) at firm , third party inspection of 100 sets of valve 765-84-cd181 (item lf no: 80000844 03) at firm premises a , third party inspection of 100 sets of injector 765-06-cd248 (item lf no: 80000064 41) at firm premise //bid details 2 / 25

Central Government/Public Sector

CTN :42424475

04 May, 2026 NA

Kendujhar - Odisha

Tender For bid to ras supply of flexible copper trailing cables d d - item 10 , item 20 , item 30 , item 40 , item 50 , item 60 cable,trg,atc,3.3kv gr,3.5cx50mm2,is9968 size & tvpe 3.5cx50 sq. mm 3.3 kv grade flexible atc conductor of class-s, epr le-3, insulated &black hofr nbr pvc type se-4 sheathed flexible trailing cable suitable for reeling/un-reeling operation. cable type- flexible, standard: is 9968(part 2) 2002 d.c. resistance at 20deg. c (ohms/km) power core max- 0.393 earth core max - 0.795. annealing test in %- (before stranding) 13.5 %. per sulphate test in g/m2- max. 5.00. conductor screeninq power core only material approx thickness mm - extruded semiconducting compound/ extruded semi conducting tape- 0.80. conductor material: annealed tinned copper, 6.6 klv grade, cable type: flexible, standard: is 9968(part 2) 2002 tests on insulation thickness (nom) mm core ldentification - power core-2.20 colour rpct red, yellow & blue for power cores & green for earth core tensile strength before ageing n/mm2- min.4.20 % variation after ageing (air oven)- max. +-30% % variation after ageing in (air-bb)- max. +- 30%. elongation before ageing in % - min.200% % variation after ageing (air oven)- max. +- 30% % variation after ageing in (air-bb)- max. +- 30%. hot set test hot set elongation- 175% permanent set 15%. lnsulation resistance constant (min.) m ohm km. at 27deg.c- min. 3670 at 90 deg.c-min 3.67. thick of lnner sheath min 2.00 mm. rein forcement- open braid of textile material physical test on outer sheath thickness (nom) / min mm- 3.50/ 2.60 colour black, over all diameter of cable mm- 52.00+-3.00. tensile strength ) /bid number : gem/2025/b/6811700 * /dated: 24-10-2025 & & / bid document 1 / 22 before ageing n/mm2 - min. 11.0 at 2oo elongation 4n/ sq. mm. % variation after ageing in (air-bb)-max. +- 50% elongation before ageing in %- min.250% % variation after ageing in (air-bb)- max. + 50%. hot set test hot set elongation- max.175% permanent set- max 15. oil resistance test variation in % in tensile strength- max. +-40% variation in % in elongation-max. +-40%. tear resistance in n/mm - min.5.0. flammability test period of burning after removal of flame- max. 60 sec. min unaffected portion from the lower edge of the top clamp - min 50 mm. test high voltage at room temp- 10 kv ac for 4 hours. water absorption test increase in capacitance 1 to 14 days max- 6% 7 to 14 days max- 2.5%., control trailing cable 12 c x 2.5 3 p x 1.5 (pair screened) 2 voltage grade 1.1 kv 3 reference standard generally confirming to is: 9968 (part- 1)1998 4 conductor a. material to is:8130/84 annealed tinned copper b. nominal area of cross section(sq. mm) i)-unscreened core (sq. mm.) 2.5 ii) - screened pair (sq. mm.) 1.5 c. flexibility class as per is:8130/84 class-5 d. maximum dc resistance of conductor at 20 deg. c i)-unscreened core (ohms/km) 8.21 ii)- screened pair (ohms/km) 13.7 5 insulation i) material epr type ie-2 to is:6380/84 ii) nominal thickness (mm) 1.0 6 two cores of 1.5 sq. mm. size twisted together to form a pair yes. 7 individual pair screening each pair of 1.5 sq. mm. size taped with rpct, screened with 0.2 mm nom dia of annealed tinned copper wires braid, taped with melinex tape. yes. 8 no of cores / pair i)-unscreened cores 12 ii)-screened pairs 3 9 identification of power cores by number printing on cores. 10 laying up (i) three screened pairs laid up together, taped with rubber proofed cotton tape to form group as "a" (ii) 12 unscreened control cores laid up together around group as "a" of screened pairs and taped with rubber proofed cotton tape applied with open spiral. 11 inner sheath a) material to is: 6380/84 hd hofr csp type se-4 b) minimum thickness (mm) 1.6 12 an open braid of nylon cord reinforced in between inner and outer sheath. yes. 13 outer sheath a) material to is: 6380/84 hd hofr csp type se-4 b) nominal thickness (mm) 2.5 14 nom. overall diameter of cable (mm) 33.0 tolerance on nom. overall dia

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government/Public Sector

CTN :45049231

08 May, 2026 NA

Delhi - Delhi

Tender For supply of 2026-27 (ami no. 30.08) 2026-27 (ami no. 30.08) intravenous fat emulsion 20% fat infusion in the power of 250 ml or 500 ml (minimum energy content should be at least 1800kcal/1000ml inpack of 250ml or 500 ml bottle). [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :45049248

08 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of spike protector 230 v hz, 5a with 3 nos.5 pin socket and sheet metal cabinet as per thespecifications detailed. acinput voltage - 230 volts %b1 10%, 50 hz %b1 3% voltagedrop - 1 volt max clamping volts - 715volts rated peak current - 4500 amps ratedpulse - 75 joules response - lessthan 100 mano sec control - on/offswitch (5a rating) protection - fuseand circuit breakers foreach socket cabinet - sheet metal with powdercoating output terminal - 3 nos. of 5 pinsockets of each rated for 5 a noise filter - elcommake noise filter power cable - pvcpower cable with 3 pin 5 a, (cable shall be conforming to is: 694) size (l xb x h) - 265 x 80x45 mm (approx.) mounting - wallmounting (with 4 nos. screws) the item shall be equivalent to model no.pss-05/3a of m/s. prosys make or similar. note: 1. offers either from manufacturer or from authorized dealer shall only be considered. 2. thetenderer shall submit complete technical details of the item offered along with the offer for technical scrutiny. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45038313

18 May, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of power glidic-330 or servo c-3 sae-30 or torque converter oil, as per drawing: tes-122 type c-3 of detroit diesel alisan usa, hydraulic transmission fluids c-3 of m/s bharat petrolium, servo transmission c-3 sae-30 of m/s indian oil corporation,power glide c-330 of m/s hindustan petrolium. (item should be suitably packed in iron drum), quality plan: n.a. [ warranty period: 30 months after the date of delivery ]

CTN :44968345

02 Jun, 2026 NA

Izatnagar - Uttar Pradesh

Tender For corrigendum : supply of helical spring for high power dmu/dpc 1400 hp coaches (engine side) as per icf drg. no. dmu/dpc 5-0-1-501, item no. 2, alt-1 & nil', confirming to rdso spec. no. wd-01-hls-94, rev.4 of june. 22, material is: 3195/92 with amndt. no. 2. [ warranty period: 48 months after the date of delivery ]

Electrical Spares Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector