Latest electricity tools Tenders | Government electricity tools Tenders

State Government

CTN :39642048

24 Mar, 2025 NA

Multi City - Multi State

Tender For supply of package no. 1 - atal tinkering lab of niti aayog electronics development, robotics, internet of things and sensors (q3) , package no. 2 atal tinkering lab of niti aayog rapid prototyping tools (q3) , package no. 3 atal tinkering lab of niti aayog mechanical, electrical and measurement tools (q3) , package no 4 - atal tinkering lab of niti aayog power supply and accessories and safety equipment (q3)

Central Government/Public Sector

CTN :39642101

20 Mar, 2025 NA

Dumka - Jharkhand

Tender For supply of package no. 1 - atal tinkering lab of niti aayog electronics development, robotics, internet of things and sensors (q3) , package no. 2 atal tinkering lab of niti aayog rapid prototyping tools (q3) , package no. 3 atal tinkering lab of niti aayog mechanical, electrical and measurement tools (q3) , package no 4 - atal tinkering lab of niti aayog power supply and accessories and safety equipment (q3)

Central Government And Public Sector

CTN :39622709

18 Mar, 2025 48.00 Lacs

Vrindavan - Uttar Pradesh

Tender For asset management services - asset to be valued; onsite-supply of equipments:- variable refrigerant flow system, outdoor unit(s) - heating & cooling, 8hp outdoor unit, , indoor unit, ductable type units, ductable type unit 5.5 tr, , split units , split units 2.0tr, , , refrigerant joint(s), indoor refnet joints , controllers, central remote control, twining kit, pcb safety plate controller, installation of airconditioning system of following items--lifting, shifting, installation, testing and commissioning of outdoor units equiped with highly efficient varaiable speed scrool compressors in each outdoor unit with noise level not exceeding 70db(a), etc. with nitrogen reprocessing, vacumising, charging and top-up of r410 a gas as per requirement at site. (r410a gas make-dupont/honeywell) , lifting shifting & installation of outdoor units - 8hp , tesing & commissioning charges - 16hp , vacuum, nitrogen reprocessing & r410a- refrigerent topup -16hp , lifting, shifting, installation, testing and commissioning of indoor units with outer cabinet equiped with pre air-filters, multispeed inverter motor, dx coil section, drain pain,electronic expansion valves, pipe connections, pcbs etc. (fastener make- hilti) , , , indoor unit(s), ductable type units, ductable type units, ductable type unit 5.5 tr, , "supply, installation, testing and commissioning of refrigerant piping, tees, sockets, expanders and reducers as per requirement at site complete with supports, threaded rods, channel, tie, fasteners etc. interconnecting the outdoor condensing units and indoor evaporating units. (make-mandev/mexflow), nitrile rubber tubular insulation (make-supreme/superlon/armaflex/a-flex/k-flex/equivalent)" , "supply, installation, testing and commissioning of 2 core x 1.5 sq.mm copper conductor shielded data cable as per requirement at site complete with supports, threaded rods, channel, tie, fastners etc. for control between indoor and outdoor unit & for communication between indoor unit & remote controllers in suitable pvc conduict , (make- polycab/havells)" , , supply, installation, testing and commissioning of pvc condensate drain piping of 10kg/sq.cm. (142.23 psi) with 6 mm thick closed cell elastomeric nitrile rubber tubular insulation up to the nearest drain point along with necessary fittings.(make- prince/supreme/finolex/polycon/equivalent) , supply, installation, testing and commissioning of hot dipped 20 gauge g.i. perforated trays for exposed refrigerant pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc. , , supply, installation, testing and commissioning of un-insulated square/ rectangular sheet metal ducts as per requirement at site complete with threaded rods, channel, tie, fastners, brackets/slotted "c" channel for supply air ducting as per the approved shop drawings jindal, sail, tata. , , supply, installation, testing and commissioning of closed cell crossed linked polymers xlpe insulation , , supply, installation, testing and commissioning of acoustic lining with 10 mm elostomeric sinusoidal surface acoustical insualtion. , , supply, installation, testing and commissioning of extruded aluminum powder coated supply air grills/difusers with dampers and return air grills/diffusers without dampers. , supply/return air grills/diffusers with volume control dampers , supply, installation, testing and commissioning of nrv , , supply & installation charges of accessories fire retardent canvas connection & filters as required for duct type indoor units. , ms-stand for odu unit , ms-jaal , civil work chase cutting for copper/drain pipe , civil work rcc corecut/chase cutting for copper/drain pipe , annexure-iii-electrical installation and accessories-panel for 16hp odu , design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following lt panels fabricated out of 18 guage crca sheet steel in cubical formationwith reinforecment of suitab

Central Government/Public Sector

CTN :39101478

12 Mar, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For bid to ras corrigendum : supply of electrical panel with accessories - c83640001432 supply of electrical panel along with busbar - incomer - outgoing - refer annexure 5a - scope of supply , 100000000001 supply of ip55 or above outdoor distribution box having 200a mccb 25ka incomer - refer annexure 5a - scope of supply , 100000000002 supply of ip55 or above outdoor distribution box having 150a mccb 25ka incomer - refer annexure 5a - scope of supply , 100000000003 supplying of lt power cable with aluminium conductor xlpe insulated pvc inner sheathed galvanised steel-3point5 core of size 70sqmm-refer annexure 5a-scope of supply , 100000000004 supplying of lt power cable with aluminium conductor xlpeinsulated pvc inner sheathed galvanised steel-having 3point5 core of size 300 sqmm-refer annexure 5a-scope of supply , 100000000005 supplying of end termination kit with brass compression gland and aluminium lugs for 3point5c x 70sqmm-refer annexure 5a-scope of supply , 100000000006 supply of end terminations kit of 3point5 core 300 sqmm size of cables - refer annexure 5a - scope of supply , 100000000007 supply of material for earthing with copper earth plate 600 mm x 600 mm x 3 mm thick refer annexure 5a - scope of supply , 100000000008 supply of 25 mm x 5 mm copper strip at 0point50 metre below ground -refer annexure 5a - scope of supply , 100000000009 supply of material for earthing with gi earth plate 600 mm x 600 mm x 6 mm thick -refer annexure 5a - scope of supply , 100000000010 supply of 25 mm x 5 mm gi strip at 0point50 metre below ground as strip earth electrode -refer annexure 5a - scope of supply , 100000000011 supplying of 90 mm dia od 90 mm and id 76 mm nominal size hdpe pipe isi marked-refer annexure 5a - scope of supply , 100000000012 supplying of materials for in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level -refer annexure 5a - scope of supply , 100000000013 shifting loading unloading placing installation testing and commissioning of above mentioned panel this includes foundation civil work-refer annexure 5b-scope of erection , 100000000014 shifting loading unloading placing installation testing and commissioning of above mentionedrefer annexure 5b-scope of erection , 100000000015 making end termination with brass compression gland and aluminium lugs for 3point5c x 70sqmm size of pvc insulated -refer annexure 5b - scope of erection , 100000000016 making end terminations of 3point5core 300 sqmm size of cables -refer annexure 5b - scope of erection , 100000000017 installation testing and commissioning of earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories -refer annexure 5b - scope of erection , 100000000018 installationtesting and commissioning of 25 mm x 5 mm copper strip -refer annexure 5b - scope of erection , 100000000019 installation testing and commissioning of earthing with gi earth plate 600 mm x 600 mm x 6 mm thick including accessories-refer annexure 5b - scope of erection , 100000000020 installation testing and commissioning of 25 mm x 5 mm gi strip-refer annexure 5b - scope of erection , 100000000021 laying of one number pvc insulated and pvc sheathed xlpe power cable above 35sqmm and upto 95 sqmm-refer annexure 5b - scope of erection , 100000000022 laying of one number pvc insulated and pvc sheathed xlpe power cable above 185 sqmm and upto 400 sqmm-refer annexure 5b - scope of erection , 100000000023 laying of one number pvc insulated and pvc sheathed xlpe power cable above 185 sqmm and upto 400 sqmm -refer annexure 5b - scope of erection , 100000000024 laying and fixing of one number xlpe or pvc insulated and pvc sheathed or xlpe power cable -refer annexure 5b - scope of erection , 100000000025 mouling through the existing roads in any kind of soil-laying of hdpe pipe 90mm pipes for cables etc-refer annexure 5b-scope of erection , 100000000026 excavation of the cable trenches in hard rock not exceeding

Central Government And Public Sector

CTN :39626081

13 Mar, 2025 4.89 Lacs

Patna - Bihar

Tender For day to day electrical fault attending and replacement of faulty electrical accessories at various rsu/te under bsnl electrical subdivision i patna.

Central Government And Public Sector

CTN :39626265

18 Mar, 2025 1.82 Lacs

Ghaziabad - Uttar Pradesh

Tender For repairing of electrical assets in te chhoulas, bts chhoulas, dadri (old), falanda bangar, thora (gr noida). - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed in medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required.a) group a, wiring for ckt wiring with 3 x 1.5 sqmm pvc ins cu cond single core in pvc conduit etc., wiring for with 3 x 4 sqmm pvc ins cu cond single core in pvc conduit etc., wiring ckt/power wiring 6 x 4 sqmm pvc ins cu cond single core in pvc conduit etc., supply & fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front i/c providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch connection, painting etc. as required., s/f of switch 5a piano type,connection etc, s/f of socket 3 pin 5a piano type,connection etc, s/f cu wire 2 core 1.5 sqmm etc, sitc of 20 watt 1200 mm led tubelight fitting omplete with all accessories etc. as required. (m/s bajaj/ surya,/ philips or similar superior make)-, sitc of ceiling fans 1200 mm sweep 2star rating complete with all accessories etc. as required. (m/s havells- es-neo/es-plus or similar superior make), s/f of regulator piano type,connection etc, supplying and fixing of dp sheet steel enclosure in recess or surface with 25/32 amp, 240 volt, c curve dp mcb i/c connection etc as reqd. -- for ac, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of upto 35 sq. mm on wall/ surface/ in loop as required., pdg.& fixing 6 swg gi wire on surface or in recess for loop earthing alongwith the existing surface/recessed / cable etc.as required., s/f 4 sqmm frls pvc insulated cu conductor single core cable ( for neutral earthing ), supplying and making end termination with brass compression gland and aluminium lugs for 4x16 sqmm/3.5 x 25 sq.mm /35 sqmm size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required., sitc of switch fuse unit rewireable type 63a 415 volt on wall, connection etc as reqd (make - hpl/ havells- / l&t or similar superior make )-, sitc of 4 pole 63a 415 v on load change over switch with side/front handle operation in sheet steel enclousers on wall, connection etc ( make - hpl/ havells- euro load/ l&t or similar superior make )-, supply & fixing 4 way, single door ,sheet steel, tpn mcb distribution board, 415/240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (but without mcb/ rccb/isolator)., supply & fixing of following rating mcbs in the existing mcb db complete with connection, testing & commissioning etc. as required. (i) 5-32 amp sp mcb c series, (b) 4pole63a 415v isolator, tp mcb 25a-- for power plant, painting of lt panel (outer side) with good quality of paint, removing old paint & dust, cleaning, etc etc, earthing with gi pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/ coke and salt as reqd (for dg neutral -02 nos, body earth -02 nos, for neutral power supply co -01 no total- 05 nos), providing & fixing of 25mm x 5 mm g.i strip on surface or in recess for connections etc. as reqd.

Central Government And Public Sector

CTN :39626266

18 Mar, 2025 1.68 Lacs

Ghaziabad - Uttar Pradesh

Tender For repairing of electrical assets in dhoom manikpur, badoki, janpath, bishada, kalonda (gr noida). - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed in medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required.a) group a, wiring for ckt wiring with 3x1.5 sqmm pvc ins cu cond single core in pvc conduit etc., wiring for with 3x4 sqmm pvc ins cu cond single core in pvc conduit etc., wiring ckt/power wiring 6x4 sqmm pvc ins cu cond single core in pvc conduit etc., supply & fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front i/c providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch connection, painting etc. as required., s/f of switch 5a piano type,connection etc, s/f of socket 3 pin 5a piano type,connection etc, s/f cu wire 2 core 1.5 sqmm etc, sitc of 20 watt 1200 mm led tubelight fitting omplete with all accessories etc. as required. (m/s bajaj/ surya,/ philips or similar superior make)-, sitc of ceiling fans 1200 mm sweep 2star rating complete with all accessories etc. as required. (m/s havells- es-neo/es-plus or similar superior make), s/f of regulator piano type,connection etc, supplying and fixing of dp sheet steel enclosure in recess or surface with 25/32 amp, 240 volt, c curve dp mcb i/c connection etc as reqd. -- for ac, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of upto 35 sq. mm on wall/ surface/ in loop as required., pdg.& fixing 6 swg gi wire on surface or in recess for loop earthing alongwith the existing surface/recessed / cable etc.as required., s/f 4 sqmm frls pvc insulated cu conductor single core cable ( for neutral earthing ), supplying and making end termination with brass compression gland and aluminium lugs for 4x16 sqmm/3.5 x 25 sq.mm /35 sqmm size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required., sitc of switch fuse unit rewireable type 63a 415 volt on wall, connection etc as reqd( make - hpl/ havells- / l&t or similar superior make )-, sitc of 4 pole 63a 415 v on load change over switch with side/front handle operation in sheet steel enclousers on wall, connection etc ( make - hpl/ havells- euro load/ l&t or similar superior make )-, supply & fixing 4 way, single door ,sheet steel, tpn mcb distribution board, 415/240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (but without mcb/ rccb/isolator)., supply & fixing of following rating mcbs in the existing mcb db complete with connection, testing & commissioning etc. as required. (i) 5-32 amp sp mcb c series, (b) 4pole63a 415v isolator, tp mcb 25a-- for power plant

State Government

CTN :39622552

24 Mar, 2025 NA

Haridwar - Uttarakhand

Tender For supply of model of centrifugal clutch assembly , cut section working model of diaphragm clutch assembly , demonstration board of electronic ignition system, ignition coil , demonstration board of mpfi system , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition , full floating axle and semi-floating axle assembly , functional/experiment model of different type of sensors , steering assembly 1. rack & pinion 2. worm & roller 3. recirculating ball 4. power steering 5. electr , synchronous gear box with stand for dismantling and assembly , tandem master cylinder with booster working model , tubed tyre of car, trucks & motorcycle , tubeless tyre of cars & trucks , tyre& split rim wheel assembly , working model of power windows , working model of torque converter model of lmv , arbor press hand operated 2 ton capacity , diesel engine crdi - 4 strokefor dismantling and assembling with swiveling stand. , diesel engine ( running condition) stationary type single cylinder , hydraulic jack hi-lift type , multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer , spring tension tester manually operated with analogue , working condition of diesel engine crdi - 4 stroke engine, assembly with fault simulation board , diesel engine six cylinder in running condition , air bag simulator , air conditioning service unit (car) , four stroke petrol engine with cng setup- working condition , heavy commercial vehicle , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , petrol engine(2-stroke) motor cycle/scooter along with special tools , transfer case with stand for dismantling and assembly , tube/ tyre vulcanizing machine , two post car lift capacity 4000 kg , tyre changer machine , working condition of petrol mpfi engine assembly with fault simulation board , logic probe , test light , angle plate adjustable 250x150x175 , angle plate size 200x100x200mm , anti theft device , battery terminal cleaner tool , car stereo , circlip pliers expanding and contracting type 15cm and 20cm each , distributor -duel advance type, reluctance type , drill point angle gauge , electrical horn ( different types) , glow plug tester , high rate discharge tester (cell tester) , holders, lamp teakwood boards, plug sockets, solders, flux wires and cables batteries round consuma , magneto spanner set with 8 spanners , marking out table 90x60x90 cm. , portable headlight aiming kit , soldering copper hatchet type 500gms , spanner clyburn 15 cm , spark lighter , spark plug spanner 14mm x 18mm x size , straight edge gauge 2 ft. , straight edge gauge 4 ft. , taps and dies complete sets (5 types) , telescope gauge , air conditioned mpfi vehicle with auto transmission and accessories , air conditioning trainer kit , alternator assembly used for lmv , demonstration board ignition system, ignition coil , demonstration board of crdi system working model , discrete component trainer / basic electronics trainer , electronic engine control module , memory keeper / battery backups , starter motor axial type, pre- engagement type & co-axial type , trolley type portable air compressor single cylinder with 45 liters capacity air , ultrasonic injection cleaning equipment , wiper motor assembly , battery charger capable to charge batteries from 5ah 150ah , fuel injection pump ve pump / distributor fuel rotary pump (dpc) pumps / along with special tools an , grease gun heavy duty trolley type 10 kg capacity , automotive oil pump for dismantling and assembling , spark plug spanner 14mm x 18mm x size long bit for alto/800 , starter motor axial type, bid details/ 2 / 63 pre-engagement type & co-axial type , turbocharger cut sectional view latest wgt type to show turbine, impeller and compressor wheels. , tyre pressure gauge with holding nipple , cut section working model of single plate clutch assembly , trolley type portable air comp

CTN :39642086

20 Mar, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , self ballasted led lamps for general lighting services (v2) conforming to is 16102 (q2) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2) , led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3) , led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5) (q3) , pvc copper cable single core and multi core circular sheathed cord with flexible conductor (v2) as per is 694 (q2) , pvc insulated copper cable single and multi - core circular sheathed cable with flexible conductor (v2) as per is 694 (q2) , led bulkhead light (q3) , modular piano type domestic electrical switches as per is 3854 (q3) , piano type non modular domestic fan regulator as per is 11037 (q3) , led batten (q2) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , led garden light (v2) (q2) , elecric bells and accessories as per is 2268 (q3)

CTN :39641900

31 Mar, 2025 NA

Bardhaman - West Bengal

Tender For supply of electrical terminals as per is 8309 (q3) , piano type modular domestic electrical sockets - is 1293 (q3) , piano type non modular domestic fan regulator as per is 11037 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , elecric bells and accessories as per is 2268 (q3) , electrical plugs (v2) isi marked to is 1293 (q2) , led recessed mounting slim panel 600x600mm 36 w , led street light driver 72 watt , led street light driver 90 watt , led street light driver 120 watt , led recessed mounting fitting 18 watts square , led drivers 40 or 45 watt , led recessed mounting fitting 12 watts square slim , copper hd lugs 120 sqmm , heating element 2000watts , heating element 1500watts , condensor 2 point 5 mfd for ceiling fan , distribution box 4 way spn double door ip 43 , distribution box 8 way spn double door ip 43 , energy meter tp ct operated , energy meter sp 10 to 40 amps , thermostat geyser , pendent holder pvc , lamp holder angular type , pvc casing caping 25mm or 1 inch length 2mtr , pvc casing caping 20mm length 2mtr , insulation tape 25mm , modular ac starter , calcium hypochlorite altoch gp make altoch , aluminium door stopper 100mm long with leg , aluminium door stopper 150mm long with leg , gasket rubber for door 2mm thick and 50 mm wide , teflon tape 19mm width , tank cover pvc for 500 and 1000 ltr capacity with fixing arrangement bid number/ & ( * ) : gem/2025/b/6020904 dated/ + : 10-03-2025 bid document/ 3 3 1 / 35

Electricity Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors