Tender For procurement of cable jointing materials - cable gland dc 3cx95sqmm, cable gland 3cx95sqmm, cable gland 3cx240sqmm, terminal block-120mm2, terminal block-70mm2, terminal block-50mm2, terminal block-35mm2, end joint kit 11kv 3c 300sqmm, st joint kit 11kv 3c 300sqmm, end term kit 1cx120 sqmm, end term kit 4cx50 sqmm, copper ring cable lug 95 sqmm, lugs-6 mm2, 3d ring type, ring termin-non insula 300sq.mm, m20, al ring type lug 300sq.mm, m16, al ring type lug 240sq.mm,, m16, al ring type lug 25 sqmm, al lugs ring type 25 sqmm, al lugs ring type 10 sqmm, cu ring type lug rl-25-6, tubular lugs-95mm2(3d2712), snap on terminal lug (1.5-2.5), m10 al ring type lug 95sq mm, m12 al ring type lug 50sq mm , m10 al ring type lug 35sq mm, copper lug ring type 16sq mm, copper feruls 120sqmm(cb-53), copper lugs ring type 70sqmm, copper lug ring type 2.5 sq mm, end t kit 33kv 3c 120 sqmm, strght joint 33kv 3c 120 sqmm, cable gland 3cx300sqmm, end t kit 11kv 3c 400 sqmm, strgt joint 11kv 3c 400 sqmm , bimetal strip, mounting rail (c channel), kbtm5-15 stud type tb 65a 600v, st joint kit 3cx300 sqmm 3.3kv, st joint kit 1cx630 sqmm 11kv, end term kit 3cx300 sqmm 3.3kv, strght jnt 1.1kv 3.5c 95 sqmm, cu strght joint 3.5c 16 sqmm
Tender For bid to ras corrigendum : supply of consumables - taparia tester , tools allen key sets mm , tools allen key sets inch , meco make multimeter model no. , supply of klin-it contact cle , rustlick 631 make ,itw signo , electronic component cleaner , wd 40 in 400ml can , supply of superlock nylon 150 mm , supply of superlock nylon 100 mm , 0.25 inch pvc tube of 1 meter , round insulated lugs 0.5 sq mm , round insulated lugs 0.75 sq mm , insulated 1.5 sq.mm lugs pin , pin and ring type insulated lug , ring type insulated lugs size , u type 1.5 sq mm copper tinne , ferrule and cap 0.5 inch ss , ferrule and cap 0.25 inch ss , green pvc sleeves 0.5 sq mm , green pvc sleeves 1.5 sq mm , measuring tape 5 mtrs stanle , ss cable ties , loctite 406 , loctite 495 , loctite 243 , neoprene rubber sheet industri , ss fitting 0.25 inch tube fitting, male conn , ss fitting 0.25 inch tube fitting, female conn , ss tube fitting, 0.25 inch male branch tee , ss tube fitting, union 0.25 inch tube od , ss fitting 0.25 inch elbow, 0.25 inch tube odx0.25 , ss fitting 0.25 tube odx 0.5 male npt , ss fitting elbow,0.25 tube odx 0.5 male npt , ss fitting 0.5 inch tube fitting, male conn , ss fitting 0.5 inchtube fitting, female co , ss tube fitting,male branch tee 0.5 inch tu , ss tube fitting,union 0.5 inch tube od , ss fitting 0.5 inch elbow, 0.5 inchtube odx0.5 , ss fitting 0.5 inchtube odx0.25 inchmale npt , ss fitting elbow, 0.5 inch tube odx 0.25 inch mal , teflon tape , 2 inch aluminum tape , insulation tape , supply of screw less non fuse , supply of screw less fuse tb , cable gland adapter, 0.5 inch npt m x 0.75 inch , cable gland adapter, 0.75 inch npt m x 0.5 inch , 0.5 inch npt ss cable gland , s of 0.75 inch npt cable gland , s of 0.75 inch et cable gland , s of 1 inch npt cable gland , s of 1 inch et cable gland , s of 1.25 inch npt cable gland , s of 1.5 inch npt cable gland , supply og 0.5 inch u clamp , supply of 0.5 inch u clamp ss , supply of 0.75 inch u clamp ss , silicon greese , supply of plastic tags , ss 304 wire , ceramic fiber rope , dowsil 732 sealant , tiki kote, black sali kote , 100 ohm resistor , 250 ohm resistor , 750 ohm resistor , 1000 ohm resistor , rubber o rings for transmitters , rs232 to rs485 convertor , usb convertor , supply of extension board , supply of pressure gauge , supply of junction box , supply of rechargeable pocket torch , supply of ma loop calibrator , supply of adjustable spanner small size
Tender For corrigendum : supply of set of cable lug as per clw specn. no. clw/es/3/0130/alt-g or latest. set consist of 37 items. full description as per attached document.
Tender For corrigendum : tggenco - nshes - supply of certain consumables at nshes, nagarjunasagar. - fevicol sr-998 1kg, bearing grease, 1kg, molykote br2 plus, rustolene (in 1 litre cans), bearings grease of servo make (in 10 kg pack), asbestos cloth, 3mm thick, 1 mtr width, welding helments sigma brand, brush, paint. size:50 mm., length:2 inch, brush,paint, size:75 mm., length:3 inch, wire brushes, 5 rows, goggle: type:grinding, rod nylon, 20mm thick, pvc dotted cotton hand gloves, pressure gauge, 0-15kgf/cm2,4 inch, 3/8 inch bsp, teflon tape size: 12.5x12mtrs. x0.075mm, cutting wheels ag4, grinding wheel ag4, wheel, buffing, sponge, 6 inch x 3.5 inch x 2 inch, abrasive cloth, type:rough, material:emery, grit-36, size: 9 inch x 11 inch, abrasive, cloth, type:smooth, material:emery, grit-100, size: 9 inch x 11 inch, braided pvc flexible hose for air, id:12.5 mm, working pressure: 7.5 kg/cm2, nylon braided rubber hose,id-24mm,od-34mm, working pressure 15kg/sqcm, oxygen regulator, two stage with two gauges, make: esab, acetylene regulators, 2 stage with 2 guage, make: esab, neoprene rubber chord 10 mm dia, rechargeable torch light, 30watt, model:digi led dl30, make: eveready, nylon cable ties, size: 400 mm, tie, cable, nylon, size: 300mm, tie, cable, nylon, size: 250mm, tie, cable, nylon, size: 200mm, tie cable, nylon, size: 150mm, tie cable, nylon, size: 100mm, terminal block, porcelian, 2pin,6a, terminal block, plastic, 2pin,6a, copper lug, 1.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 1.5sqmm, fork type, with ins sleeve, for 4mm stud, copper lug, 1.5sqmm, ring type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 2.5sqmm, fork type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, fork type, with ins sleeve, for 4mm stud, lug,copper, 2.5sqmm, ring, pre insulated, double grip6mm, copper lug, 2.5sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 2.5sqmm, ring type, with ins sleeve, for 4mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 8mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 6mm stud, tape, electrical, type:insulation, material:pvc, color:red, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:yellow, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:blue, width: 18mm, length: 7 mtr, tape, electrical, type insulation, material:pvc, color:black, width: 18mm, length: 7 mtr, bolt,w/nut, spring and flat washer, ht gr. 10.9, m20x98 mm, half thread, bolt,w/ nut and sprig washer, ht gr. 10.9, m20x60 mm,full thread, bolt w/nut and spring and flat washer, ht gr. 10.9 m16x70 mm, full thread, bolt.w/nut and spring and flat washer, ht gr. 10.9 m16x45 mm, full thread, bolt,w/nut and spring and flat washer ht gr. 10.9. m12x40mm,full thread., bolt w/ nut and spring and flat washer, m20x80 mm, ht gr.10.9, half thread, dye penetrant testing (dpt) kit containing cleaner, penetrant and developer, pack of 03 nos., chloroprene rubber o-ring cord. dia:6 mm, length: 10 mtr., chloroprene rubber o-ring cord, dia:8 mm, length: 10 mtr., fuse hrc 32a, 500v ac, din, s-00, make: siemens, fuse hrc 63a,500v ac, din, s-00, make: siemens, fuse, hrc, 200a, 500v ac, din, s-00 make: siemens, terminal block, bakelite, 2 way,6a 230v, terminal block bakelite 3 way 16a 415v, terminal block bakelite 4 way 30a 415v, terminal block, porcelian 3 way,164,415v, nylon rope diameter: 12mm, colour: yellow/white type: braided, length: 100 meters roll, gas cutting hose (red). (1 no may be read as 1 meter), gas cutting hose blue (1 no, may be read as 1 meter), socket countersunk head cap screw, m8x20 mm. allenkey size: 5mm make: unbrako (part no. 103340)
Tender For supply of copper thimble fork type pre-insulated 1. 5 sq mm , copper thimble fork type pre-insulated 2. 5 sq mm , copper thimble fork type pre-insulated 4 sq mm , pvc insulated ring type cu thimble 1. 5 sq mm , pvc insulated ring type cu thimble 2. 5 sq mm , pvc insulated ring type cu thimble 4 sq mm , pvc insulated pin type cu thimble 1. 5 sq mm , pvc insulated pin type cu thimble 2. 5 sq mm , aluminium thimble pin type 10 sq. mm , al lugs 16 sq mm, ring type insulated , aluminium thimbletube 16 sqmm bolt size 10mm , aluminium thimble ring type 35 sq mm , aluminium thimble ring type 50 sqmm , thimble al 70 mm2 ring type , copper thimble din type terminal 120 sqmm bolt size 10mm , copper thimble din type terminal 240 sq mm bolt size 12mm , copper thimble 300 mm2 , copper thimble 400 mm2 , ring type copper lug 500sqmm , cu insulated twin end sleeve boot lug 4sqmm , cu insulated twin end sleeve boot lug 2. 5 sqmm , painting brush 2 , pvc insulated multistrand copper conductor single core cable of size 2. 5 sqmm , pvc flexible copper cable 3 core 4 sqmm , 2 core 1 sq mm pvc insulated copper conductor flexible pvc sheathed cable 1100 volt , pvc insulated unarmoured copper cable 2 core 2. 5 sq mm , pvc insulated unarmoured copper cable 3 core 2. 5 sq mm , pvc tape red blue yellow black , end crimping tool suitable for 10 mm2 to 50 mm2 lug , two way switch piano type 6a 240volt , 15a 16a switch piano type , 3 pin power socket 15a 5a , power point combined switch socket 15amp with gang box , plug top 5a6a 3 pin , 3pin plug top 15amp , mcb 220v ac 2 pole 10a , mcb 63 amp tpn c-series , test pencil line tester , led indication lamp ) /bid number: gem/2025/b/6912412 * /dated: 29-11-2025 & & / bid document1 / 50 & & ' ' /item category universal type 24v-240v acdc amber , led indication lamp, universal type 24v 240v ac dc white , led indication lamp universal type 24v 240v ac dc red , led indication lamp universal type 24v 240v ac dc green , led indication lamp universal type 24 240v ac dc yellow , led indication lamp universal type 24 240v ac dc blue , push button switch 1 no and 1 nc contact 220v dc color red , push button switch 1 no and 1 nc contact, 220v dc color green , soldering kit 35w along with solder wire, soldering paste flux desoldering pump magnifying glass , non flammable electrical contact cleaner 500 ml bottle , hexa blade , markin cloth , hand gloves foam coated nitrile gloves skin tight for general purpose industrial applications , 18 w led bulb , led flood light 50w , led tube light fitting 1 ft , led tube 2 ft 20 w , led tube light 4 length power consumption 20 watts minimum light output 2100 lumens , heat shrink sleeve 50mm , crocodile clip , digital multifunction meter aux supply 230v ac ip 3 phase 4 wire size 96 96 mm panel mounted , multifunction timer range 0. 05 to 300 hrs with 2 c o contact supply 24 240volt ac dc , 0 60 sec on delay electronic timer 2c o 240v ac , mpcb 32a 415v ac with short circuit and overload protection o l range 22 32a , copper thimble din type terminal 10 sq mm bolt size 6mm , thimble al 25 mm2 ring type , electrician hammer 250 gram with handle , ferrule for wires - 1. 5mm , ferrule for wires - 2. 5mm , ferrule for wires - 4. 0mm , ferrule for wires 6. 0mm , 18w led downlighter recessed round type , cable tie 150mm , cable tie 200mm , cable tie 250mm , cable tie 350mm , cable tie 500mm , measuring tape 30mtrs
Tender For corrigendum : supply of point machine and variouse other items as per boq attached inspectioon rdso rites consignee - supply of point machine irs type 220 mm stroke clamp type as per irs s$-24/2002 (amendment 1) or latest.(inspection agency:- rdso), supply of q-series led ecr (universal type i.e.qecx-61), 4f/4b complete with plug board(base plate), connectors, retaining clips etc. and conforming to brs: 941a sts / e / relays / ac lit led signal / 09 - 2002, amdt.-1 or latest and rdso spec.no.irs: s - 34, s- 23 or latest, as applicable. the interlocking code for this unit shall be "abdhk". (inspection by rdso)., contactor unit (qbca1 type), 24 v dc, 2hf / 4b complete with plug board (base plate), connectors, retaining clips etc and conforming to brs- 943 and rdso specn. no. irs : s - 34, s- 23, s - 60 or latest, as applicable. th e interlocking code for this unit shall be "bcejk". (inspection by rdso)., q-series magnetically latched neutral line relay (ql1 type), 11f / 4b, 24v dc complete with plug board (base plate), connectors and retaining clips and con forming to brs-935a and rdso specn. no.irs : s - 34, s - 23 or latest, as applicable. the interlocking code for this unit shall be "abdeg.(inspection by rdso)., supply of basic material to construct unit maintenance free earth as per rdso specs. no. rdso/spn/197 ver. 1.0 or latest to achieve a resistance less than 1 ohm. it consist of following:(a) copper bonded steel electrode of minimum 3.0 meter long, minimum 17.0 mm dia with copper bonding thickness of minimum 250 microns and ul listed and marked = 1 no. (b) earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) copper strip of 300x25x6 mm (meeb) = 1 no. (e) copper strip of 150x25x6mm (seeb) = 1 no. (ii) supply of 35 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting main earth electrode to meeb in the equipment room in duplicate. (minimum 10 meter.) (iii) supply of 16 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting meeb to seeb and spd to meeb (minimum 10 meter.) (iv) supply of 10 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting various equipments to seeb (v) supply of copper lug sleeve for 3/16 cable.(inspection by consignee)., supply of master telephone with voice logging facility for electronic lc gate telephone system as per specification no: rdso/spn/tc-51/2011 revision 3.0 with amendment no. 1 or latest. (inspection by rites)., electronic lc gate slave telephone system with voice recorder as per rdso specification no. rdso/spn/ tc/51/2021 revision 1.0 (inspection agency:- consignee), supply of centralized power supply system 24 volts dc power pack with 7ah mf battery for electronic lc gate telephone system as per rdso spec:- no. rdso / spn / tc / 51 / 2011 (rev. 3.0) amdt - 1 or latest.(inspection agency:- consignee), supply of optical power meter, type-b, as per tec spec. gr / opm - 01 / 03 feb. 2005 or latest. (make & model khushicom-k280) or similar branded make. (inspection by consignee)., supply and testing of optical laser light source of make- jdsu model- ols-35 or similar branded make.(inspection agency:- rites), supply of optical laser torch of reputed make. (make & model-proskit mt-7530) or similar branded make. (inspection agency: - consignee), supply of automatic fusion splicer for single mode optical fibre cable, along with accessories as per tec spec. tec/gr/tx/osm 001/04/sep-12 or latest of make superior/fujikura or similar. consignee shall approve the supply only after successful demonstration at site. (inspection agency:- rites), supply of otdr suitable for 1310/1550nm fiber with resolution of 60 cm, dynamic range of 314/29 db with all accessories for working on single mode optical fiber as per tec spec. tec/gr/tx/otd 001/05/sep-19 or latest, of reputed make like yokogawa/zdsu/viavi or