Latest electrodes scrap Tenders | Government electrodes scrap Tenders

CTN :42328360

28 Oct, 2025 NA

Firozpur - Punjab

Tender For corrigendum : supply of stainless steel rectangular , hot rolled steel angle , hot rolled strips flats , wire mesh , hex nut and bolt , plain washer 10mm , welding electrode , enamel synthetc exterior under coating paint , epoxy based zinc phosphate primer , labour charge for bmp iik and aat , labour charge for arv

State Government

CTN :42311758

05 Nov, 2025 NA

Wardha - Maharashtra

Tender For supply of hysteroscopic instruments - supply of hysteroscopic instruments, diagnostic hysteroscope-- feature specification- outer diameter 2.7 mm - working length 250 mm 300 mm- angle of view: 30 - field of view wide-angle ( 80 )- image transmission rod lens system (preferred), or fiberoptic- sheath size 3.5 mm (outer sheath)- distension media normal saline or co (based on system compatibility)- light source connection standard fiber optic light post (compatible with xenon or led sources)- port type luer lock inflow port (optional outflow depending on model)- sterilization autoclavable or low-temperature plasma sterilization- material surgical-grade stainless steel and medical-grade polymers, operative hysteroscope (4 mm)- telescope diameter 4.0 mm- working length 270 300 mm- outer sheath diameter 5.5 mm (depending on continuous flow or single-flow sheath)- working channels 1 or 2 channels, standard 5 fr (1.7 mm) instruments- angle of view 30 (standard)- field of view wide-angle, distortion-free- image system rod lens optical system, hd-compatible- sheath type continuous flow (inflow and outflow channels)- material surgical-grade stainless steel- light transmission fiber optic light post, universal connector- distension media compatibility normal saline (for bipolar energy) or non-electrolyte fluid (for monopolar)- electrosurgical compatibility bipolar or monopolar electrodes (rollerball, loop, hook, etc.)- electrode type supported 5 fr electrodes resectoscope type- instrument compatibility operative scissors, graspers, biopsy forceps (5 fr)- sterilization autoclavable (134 c) or low-temperature plasma sterilization, hysteroscopic resectoscopesheath & telescopeouter diameter: 4.0 mm working channel: 1.5 2.0 mm (for scissors, biopsy forceps, graspers, bipolar electrodes)angle of view: 30 length: ~25 30 cmfibre optic light transmission with high-resolution rod lens systemresectoscope system (if using with loop / rollerball)available as mini-resectoscope (4.0 mm)compatible with bipolar energy sourceworking element: spring-loaded resectoscope with 4 mm telescopeelectrodes: loop, rollerball, knife, needle (bipolar compatible)fluid managementcompatible with saline (0.9%) as distension medium (for bipolar)continuous flow sheath for clear visioninflow/outflow channels for pressure-controlled irrigationother featuresautoclavable stainless steelergonomic design for operative stabilitycompatible with standard hd camera and light source systems, hysteroscopic scissors size: 5 fr (~1.7 mm), 30 36 cmpasses through working channel of 4 mm hysteroscope.types: straight / curved / angledmaterial: stainless steel, autoclavable, hysteroscopic biopsy forcepssize: 5 fr (~1.7 mm), 30 36 cm long.fits into working channel of 4 mm operative hysteroscope.types: biopsy (punch), grasping, scissors.jaws: serrated, single/double action, rotatable.reusable (autoclavable)., hysteroscopic morcellatorsystem componentshandpiece with cutting blade (rotating/reciprocating)inner cutting tube (sharp-edged) inside outer sheathcontinuous suction attached simultaneous cutting + tissue removalcompatible hysteroscope sheathdimensionssheath outer diameter: 6 7 mm (mini systems available with 5 mm)working channel: 3 3.5 mm (for morcellator blade)blade sizes: 2.5 3 mm (straight or side-facing cutting window)length: 26 30 cmoptics0 or 12 telescope, 2.9 4 mm rod lenshigh-definition fibre-optic illuminationenergy / working principlemechanical cutting continuous suction for clear vision and specimen collectionworks with normal saline as distension medium, hysteromat fluid management systemspecificationsmedium used: co (rarely now) or, preferably, fluids (normal saline, glycine, mannitol, sorbitol).pressure range: adjustable, usually 30 150 mmhg.flow rate: 50 500 ml/min (depending on model).display: digital display for set pressure, actual pressure, inflow, outflow, and fluid deficit.safety: audible alarms for excessive pressure or fluid deficit (to prevent overload/turp syn

Central Government And Public Sector

CTN :42342297

31 Oct, 2025 NA

Bhilai - Chhattisgarh

Tender For corrigendum : supply of semi automatic mild steel portable electrode oven.

CTN :42360039

27 Oct, 2025 NA

Parganas - West Bengal

Tender For supply of power generator - dg set (up to 900 kva) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm , disconnection of existing unserviceable 40 kva and 70 kva dg set mechanically and electrically

Central Government And Public Sector

CTN :42423118

14 Nov, 2025 12.87 Lacs

Chamba - Himachal Pradesh

Tender For supply of 309 mo-15 4.0 mm , welding electrode ss e-309, mo- 15, size 2.5mm , hose clamp 0.5 inch , pneumatic hose pipe 1 rubber , plastic tarpaulin size 18x30inch , plastic tarpaulin 12ft x 12ft , tap set with adjustable handle 6 to 24mm , metric tap hss m16x2 set of 3 , tap set 22mm set of 3 , tap set 24mm set of 3 , drill bit 2mm hss , drill bits, 4mm hss , drill bit, 6mm hss , drill bit, 8 mm hss , drill bits, 10mm hss , drill bit, 14mm hss , drill bit, 16mm hss , drill bit, 18mm hss , drill bit, 22mm hss , drill bit 28mm hss , drill bit 30mm hss , drill bit hss with carbide tip, straight shank, 3 mm dia. , drill bit hss with carbide tip, straight shank, 5 mm dia. , drill bit hss countersink 1-1by2inch taper shank for sink hole , drill bit hss 16x2mm tapershank spiral flute taping , drill bit, spiral fluted tapping 22x2.5 mm hss, tapper shank , drill bit, spiral fluted tapping 24x3 mm hss, tapper shank , tungsten carbide brazed tip crancked turning and facing lathe tool bit 10mm length 100 mm set of 11pcs , tungsten carbide brazed tip for lathe machine , spring caliper inside outside divider 8inch set of 3 , ball pin hammer 500gm , chipping hammer , allen key 3by8 inch size , allen key 10mm size , allen key set sizes, 1.5mm to 10mm , slide wrench 12inch , slide wrench 15inch , round file 12 inch rough , file full round 12inch smooth , file half round rough 10 inch , file half round smooth 12 , file flat rough 12 , file flat smooth 12 , impact hex allen bit socket 3by8inchx1by2inch square drive female , impact hex allen bit socket 10mm x 1by2inch square drive female , chiesel 6 inch , chiesel 8 inch , screw driver kit consisting of 8 screw drivers , combination plier 8inch , long nose plier 215mm , wire stripper and cutter , spirit level 300mm 0.5mm accuracy magnetic , steel metal a-z alphabet letter and 0-9 number punch mark stamp , oxyzen regulator double stage , da regulator double stage , gas cutting torch , gas hose-oxyzen cylinder , gas hose-da cylinder , cutting wheel 355x3x25.4 mm , ball valve 3by4inch ss , welding holders 600amp , grease gun bucket type 10kg capacity , electric paint spray gun 750wby950mlby2.5mm nozleby32000rpm , black paint , white paint , yellow paint , blue paint , alluminium paint , smoke grey paint , epoxy coal tar paint black , epoxy primar coat gray base , red-oxide primar for enamel paint , p. o. red paint , thinner for epoxy paint , turpentine oil tarpin oil , painting brush 2inch , painting brush 3inch , painting brush 4inch , painting brush 5inch , twisted knot wire cup wheel brush 3inch , wire brush , anticorrosive solution wd-40 , rubber solution 200ml , loctite bonding 495, 20 ml vial , loctite 577 thread sealant 50ml , loctite 262 thread locker 50ml , m-seal gp epoxy compound , taflon tape , caution red tape polyster, 250 mtrs length , nylone rope 1inch , nylone rope 1by2inch , steel wire rope sling plain loop eye at both end rope size 24 mm length 3m , polyster endless round sling capacity 5 ton 8 mtr long , polystr nylon endless round sling 2 ton 5 mtrs , line tester length 130mm , rechargeable havy duty 10w led torch with emergency light , scissors 12inch , measuring tape 5 mtr , measuring tape 30mtrs , packing tape brown 2inch , steel scale 12inch , soap //bid details 2 / 112 125 gm , battery 1.5v dry cell , battery 1.5v iec lr-14 , permanent marker black , permanent marker red , permanent marker white , cotton waste , duster cloth , gum boot size 6 no , gum boot size 7 no , gum boot size 8 no , gum boot size 9 no , rubber hand gloves pair , welding gloves , cotton hand gloves , welding gogles , grinding goggle , face shield for welding works , industrial raspiratery protection mask dustbymist , safety belt full body with rope hook and shock absorber , hot oil protection suit , carbon brush for magnetic drill machine model swc-50 15.8x20x6.2, 220v , armature for magnetic drilling mc model swc-50 1500wby220v , ball bearing 6006 zz , wire rope pully block 5 ton rope dia 22 mm , bal

Central Government/Public Sector

CTN :41798053

27 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of rutile type covered arc welding electrode for carbon steel, class e6013 of size 6.3 mm dia x 450 mm

corporations/Associations/Others

CTN :42414963

03 Nov, 2025 NA

Margao - Goa

Tender For supply of loctite 243 in 50 ml pack,wire brush with plastic handle,measuring tape of 5 meters length with belt lock,coated abrasive or emery paper 80 grit of size 1mtr x 100mm of make 3m,4 inch green colour cut off wheel,hss drill bit of 5 mm dia of bosch make,hss drill bit of 6 mm dia of bosch make,hss drill bit of 8 mm dia of bosch make,hss drill bit of 10 mm dia of bosch make,ptfe thread seal tape,heavy duty 4 inch x 15 mtr blue color tape for patch work of seat covers,aluminium pop rivet of size 4mm dia x 13mm length,leather hand gloves for welding,stainless steel welding electrode packed in 2 kgs packet of size 2 pt 50 mm x 350 mm,mild steel covered electrodes of classification e6013 confirming is 814 2014 of size 3 pt 15 mm x 350mm,painting brush 100 mm,paint brush 25 mm wide best quality,rug cloth contains new cut piece of soft cotton cloth,safety goggle make 3m karam

CTN :42415822

13 Nov, 2025 1.75 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of copper welding cable 35 point 59 sq mm,copper welding cable 50 point 59 sq mm,ball bearing 6024,ball bearing as per sample,drill 3 point 45 mm high speed steel,power hydraulic oil aw 68,cast iron machine welding electrode size 3 point 15 x 350 mm,diamond wheel dresser 2 carat n grade size dia half inch ledngth 8inch,hack swa hand frame 14 inch,brass rod dia 16 mm lead free

Central Government/Public Sector

CTN :42298770

31 Oct, 2025 NA

Raigad - Maharashtra

Tender For supply of filler wire for welding 25: 22: 2 cr: ni: mo steel as per spc. cr. ur510, 2.4 mm dia. with mtc , filler wire for welding 25: 22: 2 cr: ni: mo steel as per spc. cr. ur510, 1.6 mm dia. with mtc. , electrode for welding cr: ni: mo 25: 22: 2 material dia 3.2 mm

Central Government/Public Sector

CTN :41854307

31 Oct, 2025 NA

Vadodara - Gujarat

Tender For corrigendum : supply of welding electrode e-7018 as per is 814: 2004 / aws sf a- 5.1 , m. s. electrodes aws-e-7018 3.15mm , m. s. electrode aws-e-7018 4mm , ms electores e7018 5mm , ms electrodes e-6013 2.5mm , welding electrode aws-e-6013-3.15mm , ms electrodes e-6013 4mm , electrode ss 3.15 mm 1pkt= 2.5k , electrode ss 4.0mm , electrode welding ss e316-16 3/16" (5.0* , electrode welding e10018-d2 1/8" (3.2mm) , electrode welding e10018-d2 5/32" (4.0m* , electrode welding e10018-d2 3/16" (5.0m* , saw flux f7p2 for aws/sfa5.17: eh-14 , saw wire aws/sfa5.17: eh-14, 2.5mm , saw wire aws/sfa5.17: eh-14, 3.15mm , welding electrode e-106 4mm , electrodes ci 3.15mm , weldig electrode cast steel 4mm , mig welding wire

Electrodes Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector