Latest electromechanical spares scrap Tenders | Government electromechanical spares scrap Tenders

CTN :41273460

20 Aug, 2025 NA

Gopalganj - Bihar

Tender For corrigendum : supply of mechanical engineering equipments - models and charts , drawing equipments and instruments , models for projection and demonstration , combined shear force and bending moment apparatus , heat pump , separating and throttling calorimeter , indicator unit , green sand moulding up, casting up and patterns , hot forging equipment , punching blanking press , screw pitch gauge , working models of surface condenser , refrigerant leak detector , air conditioning test rig , air conditioning unit , sling psychrometer , natural convection apparatus or test rig , forced convection apparatus or test rig , thermal conductivity apparatus , stefan boltzmann up , thermal conductivity apparatus for composite wall , advanced casting equipments and tools , 3d printer , bicycle free wheel sprocket mechanism, geneva mechanism, ackermans steering gear mechanism and foot operated air pump mechanism , different types of cams, follower sand cam follower arrangements , various belt drives, chain and sprocket , various types of brake assemblies , vehicle tyre balancing machine , proximity sensor kit , temperature transducer kit , pressure transducer kit , flow sensor kit , thermistor , thermocouple , stepper motor control trainer , hydraulic motor trainer , cut sections of pumps, actuators, valves and accessories used in hydraulic systems , working models of pumps, actuators, valves and accessories used in hydraulic systems , oil hydraulic trainer , advanced electro hydraulic and electro pneumatic hardware systems , out put devices , thermal actuators , magnetic actuators , open and closed loop control system kit , pid controller test bench , cro 150mhz and 100mhz and 70mhz and 50mhz , rs485 i o module , ethernet i o module , pneumatic trainer , hydraulic trainer , thermal conductivity apparatus, metal bar, electric heater, thermocouple , experimental set up for thermal conductivity of liquid , experimental set up for thermal conductivity of insulating material , composite wall apparatus , critical radius of insulating materials apparatus. , experimental up to for testing effectiveness of metallic fin pin fin apparatus , a metallic tube of diameter d 45mm and length l 450mm with a electrical heater coil along the axis of the tube , stefan boltzmanns apparatus , emissivity apparatus , critical heat flux up , batteries and fuel cells , hydrometer , capillary tube , red wood viscometer , beaker , pipette , electronic balance

CTN :41378884

22 Aug, 2025 12.3 Thousand

Bengaluru - Karnataka

Tender For supply of machinery and it equipment laboratory on turnkey basis - printers, fly press, power hacksaw, pedestal grinding machine, pillar drilling machine, cnc mill, cnc turn , conventional mill, conventional lathe, cnc simulators, machine vice 150 mm (drilling), rotary table, sleeves mt 3, sleeves mt 2, sleeves mt 1, self centering drill chuck 12 mm, applications for pneumatic & hydraulic, hydraulics & electro hydraulic trainer , pneumatics & electro pneumatics trainer, storage cabinets (amariah), chairs for computer lab, furniture for computer lab, mechanical work benches with vice, two tier bunker cot in nos., drawing board with stand in nos., ups-20kva, pedestal industrial fan, wall mounting fans for work shop, welding machinery & equipment, software-master cam (5 users), software - solid works (60 users), led projector, white boards , smart board, concave milling cutter dia 63 x 6 radius x bore size dia 27 mm, t slot cutter with parallel shank dia 17.5x8mm width shank dia8mm, parallel shank end mill dia 16 double fluted, parallel shank end mill dia 12, parallel shank end mill dia 10, parallel shank end mill dia 8, parallel shank end mill dia 6, knurling tool straight & diamond cut, hss tool bit 1/4. x 1/4 x 6., oil stone 25 x 52 x 150 mm, hss centre drill dia 8 mm, hss centre drill dia 3.0 mm, hss counter sink bit 120 degree, hss machine reamer dia 6 - 10 mm, hss hand reamer dia 6 - 10 mm, hss die m4 - m12 with die stock, hss tap set for size m4 - m12 with wrench (set), hss drill bit straight shank dia 3 to 12 mm (step of 0.5 mm) (set), sine bar 200 mm, goose neck clamp set, strap clamp set, clamp .c. 10.inch, clamp .c. 5.inch, tool makers clamp 2.x 5., magnetic v block, round file second cut 8.inch, round file second cut 10.inch, round file second cut 12.inch, round file bastard 12.inch, triangular file smooth 6.inch, triangular file smooth 8.inch, triangular file second cut 6.inch, triangular file second cut 8.inch, triangular file second cut 10.inch, triangular file bastard 10.inch, square file smooth 6.inch, square file smooth 8.inch, square file second cut 6.inch, square file second cut 8.inch, square file second cut 10.inch, square file bastard 12.inch, hand file second cut file 10.inch, flat file rough 12.inch, flat file smooth 8.inch, flat file smooth 10.inch, flat file second cut 8.inch, flat file second cut 10.inch, flat file second cut 12.inch, flat file bastard 12.inch, convex milling cutter dia 63 x 6 radius x bore size dia 27 mm, outside caliper (divider) 150, machine brushes, bench brushes, file brushes, hammer cross peen 0.75 kg with handle, ball peen hammer 250 gms& 500 gms, flat chisel, hacksaw frame fixed 300mm, hss hand hacksaw blade 18 tpi, needle file set, warding file smooth 6.inch, knife edge file smooth 6.inch, knife edge file smooth 8.inch, knife edge file second cut 6.inch, knife edge file second cut 8.inch, knife edge file second cut 10.inch, half round file smooth 6.inch, half round file smooth 10.inch, half round file second cut 6.inch, half round file second cut 10.inch, half round file second cut 12.inch, half round file bastard 12.inch, round file smooth 6.inch, round file smooth 10.inch, round file second cut 6.inch, material handling equipment, bench grinder, dia indicator - 0.01mm with styallus (needle type), feeler gauge 0.05 to 1.0 mm, radius gauge from 7.5 -15mm, radius gauge upto 7mm, thread pitch gauge metric & inches, vernier bevel protractor, universal magnetic dial stand, outside micrometre 25-50 mm, outside micrometre 0-25 mm, dial vernier 150 (0.02 lc), digital vernier 0 - 150 mm, vernier caliper 0 - 200 mm, vernier caliper 0 -150 mm, vernier height gauge 300 mm, surface plate granite 600 x 600 x 80 mm with stand, number punch 5 mm set, center punch, scriber, try square 4 inch blade, divider spring type -150 mm, inside caliper (divider) 150, computers., material testing lab equipments

State Government

CTN :41434445

25 Aug, 2025 7.86 Lacs

Srinagar - Jammu And Kashmir

Tender For construction of 01 no. 125mm dia, machine drilled hand pump tube well and supply, installation, testing and commissioning of electro mechanical works at ground colony khimber district srinagar.

corporations/Associations/Others

CTN :41225088

18 Aug, 2025 NA

Ranga Reddy-T - Telangana

Tender For corrigendum : supply of spares for otis elevator d d - limit car board , kit electro magnet , 41 type lock rhk , limit shoe switch for lift machine , limit switch for lift machine , mechanical switch , bracket sheave pt.no.no 316 cb4 , bracket sheave pt.no.no 316 cb3 , bracket lh , bracket rh , button pt.no.daa 10204 g355 , button pt.no.daa 10204 g356 , monochrome lcd for lift machine , guide shoe complete for lift machine , kit tension fr_w mtg accessories for lift machine , gib_s for lift machine , c.i.gibs for lift machine , lh 454_8 governer , encoder for lift machine , t b panel assly for lift machine , dob_dl- board for lift machine , rseb board for lift machine , sib board otis india for lift machine , mag. switch , 6mm bulldog grip for lift machine , btn_ sng il blu pt.no.daa10204g229 , btn, sng il blu pt.no.daa10204g101 , single ilum blu pt.no.daa10204g102 , btn_pt.no.daa10204g103 , single ilum blu pt.no.daa10204g104 , single ilum blu pt.no.daa10204g105 , single ilum blu pt.no.daa10204g106 , display_ 4.3 , magnet small , magnet big , hoist rope , sheave 610mm , worm gear , 16 bt worm shaft assly , 8mm gov rope galvanised , oil leakage kit , kit rubber pads , brake liner kit , kit sht

CTN :41332739

26 Aug, 2025 NA

Samastipur - Bihar

Tender For supply of mechanical engineering lab equipment - four stroke petrol engine test rig ) with rope brake dynamometer, ic engine ( four stroke single cylinder diesel engine test rig, computerized single cylinder 4-stroke crdi vcr diesel engine with open ecu & egr , with electric start and eddy current dynamometer, cnc lathe machine, scara robot sr4-3215, electro-pneumatic control system ( plc ), turret lathe, muffle furnace, wood turning lathe machine with floor mounting )

CTN :41343616

26 Aug, 2025 NA

Allahabad - Uttar Pradesh

Tender For providing of operation and maintenance of electro-mechanical installations - floating trash skimmer and waste removal machine with weed cutting arrangement (aquatic weed removal mechanism)

CTN :41305773

25 Aug, 2025 NA

Medak - Telangana

Tender For supply of computarized electro mechanical universal testing machine (utm 200 kn)

CTN :41203469

25 Aug, 2025 1.50 Crore

West Tripura - Tripura

Tender For supply of different machineries - supply of different machineries., automatic knife sharpening paper cutting blade grinding machine machine size: --grinding length 1600 to 1800mm, grinding width 150/160mm.width of the machine table 200 plus mm, grinding motor 4to6kw, cast iron/welded modular construction, smooth/ss inner area to drain out the cooling water drainage, hardened and ground steel bands for main & side guides, easily exchangeable, cast iron table with t slots & clamps, cast iron swiveling table for bevel grinding in one setting swiveling 360 degrees. additional clamping sides with t slots & clamps, *grinding heads should be smooth to move on carriage ways of the bed, branded grinding motor should be used like siemens/abb/kirloskar etc.,mounted with electro coolant pump, accessories required.:a) herded grounded strip. one set., b) grinding stone., c) honing stones.d). stone desser.,e). spl. tools in any, 43 fully automatic heavy duty hydraulic paper cutting machine-- front table length 680 mm.,front table height 900 mm., minimum (hydraulic) clamp pressure 400 kg.,max. (hydraulic) clamp pressure 4000 kg., smallest cut without false clamp 25 mm., smallest cut with false clamp 25 mm., cutting width 1070 mm., clamp opening 130 mm., weight of the machine 2800 kg or above., back gauge speed (normal) 50 mm. per second., back gauge speed (exp) 200 mm. per second or above., operative power supply 350-500v3 phase., max power within 4.5 kw.,machine height within 1700 mm., operative temperature 10 to 55 degree., hydraulic valve and clutch, operative brake system., multi-layer photo electric safety., double stroke prevention/two hand cutting cycle switch., mechanical overload prevention., air table with 8.8 coating.,the machine should be supply with future provision to incorporate programming system od bear minimum expenses., back gauge positional accuracy 0.03 mm., servo motor driver back gauge mechanism., bhartiya cutter hammer makes control gear., perfect binder machine ----4four) clamp, production speed 2500 per hour., book block size, book width 100 to 270 mm., book length 150mm to 440 mm., book thickness 3 mm. to 50 mm., dimension and weight , length x width x height 3200 mm x 1400 mm x 1220 mm, weight - 2700 kg approx., power supply 415 v, 50 hz 3 phase., damper roller washing machine----machine size: 30 width, 70 length,36 height, machine operation:, forward/reverse switch, max roller replacement: 4(four), max roller size :60 , roller wash tray: stainless steel with m.s fabrication, p.s plate processor- dimension (l x w x h)-1170 x 1260 x 860 mm, plate size- 700 x 970mm, developer tank capacity-40 liters., electric voltage-220 volt., speed-300-600mm / min. automatic double side flip top palte exposure-exposing area -960 x 1200 mm, power supply -220 v single phase, exposure uniformity-85-95%, light source should be from bottom of the exposure machine, metal halide lamp with 3kw capacity with instant start, arrangement for exposing from both sides.

Electromechanical Spares Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others