Latest electronic signage Tenders | Government electronic signage Tenders

CTN :40198075

12 May, 2025 48.72 Lacs

Jaipur - Rajasthan

Tender For work for supply of furniture as per requirement in municipal corporation jaipur heritage headquarters building, zone office and other offices under the corporation.annual rate contract 2025-26 - providing and placing executive tabel size 8 x 36 x 26 (l x w xh) top- 50 mm membrane finish with step quarter round edges base structure- 18 mm membrane finish, cnc rounting design on modesty panel and pillar, mounting 25+25+25 mm thick with membrane finish with step quarter round edges shutter- 18 mm memmbrane finish with quarter., providing and placing executive tabel size 69 x 36 x 26 (l x w xh) top- 50 mm membrane finish with step quarter round edges base structure- 18 mm membrane finish, cnc rounting design on modesty panel and pillar, mounting 25+25+25 mm thick with membrane finish with step quarter round edges shutter- 18 mm memmbrane finish with quarter., providing and placing executive side rack table size 36 x 16 x 30 (l x w xh) top- 50 mm membrane finish with step quarter round edges base structure- 18 mm membrane finish, cnc rounting design on modesty panel and pillar, mounting 25+25+25 mm thick with membrane finish with step quarter round edges shutter- 18 mm memmbrane finish with quarter., supply and fixing of high back officer executive leoma with head rest. chair frame material-mild steel, seat material-leatherette upholstered, back material- leatherette upholstered, base material-fibre, overall height (cm) 111.76, overall width (cm),49.53, overall depth (cm) 45.72 isi marka make brand as per direction of engineer in charge. (rates are all inclusive taxes.), supply and fixing of s.s. leather office visitor chair black colour with foam seat & back for office use of size 1.25 inch pipe crome finish approved make brand quality as per direction of engineer charge. (rates are inclusive all taxes), providing and fixing running l shape sofas upto 750 mm height x 850 mm wide and in meeting room area ,the frame to be made of good quality softwood and 40 density hd foam should be given back and 75 hd density in seat , seat foam of 4" thickness and back faom of 3" thickness, and entire sofa to be covered with approved fabric of not less than 600.00 per meter as per drg. design and specifications.per seat, providing and fixing of center table size 3-0"x3-0"x1-6" made out of 19 mm thk commercial plyboard structure as under.the table top 12 mm thick glass. under structure duly finished in 1 mm thck laminate as per design., providing & fixing revolving chairs with injection moulded pp back upholstered with breathable mesh.providing 2 dimensional adjustble lumber s upport. seat made of 12 mm thick hot pressed moulded ply bonded from resin which emmits low urea formaldehyde validating green point of view. ply riveted with star nut for increasing strength in ply & fastening of fasteners . seat provided with pu moulded foam of density 50 kg/m3 of thickness 45 mm to 50 mm.contours designed in foam to give complete seat support & thigh support. t shape height adjustable armrest,comprising of m.s 55 mm(w) x 6mm(t) plate double embossed with 35 mm oval slots drilled for smooth & adjustable fixing of armrests to the seat.the m.s plate covered with p.p cover ,enhancing its aesthetic look & providing the adjustable integrated within.providing a p.u pad on the t shape arms for handrest comfort .m.s insert with p.u intigrated arms 025mm(l)x 80mm(w) x35mm(t) . providing synchro tilt mechanism. the sheet of the mechanism is 2 mm thick of ms crca grade. the pneumatic height adjustment shall have an adjustment of 10.0 cm and the pump should be as per bifma 5.1 standards. providing 660 mm dia five pronged nylon base, tested up to 1200 kg impact load to evaluate the the stability of the pedestal to withstand stress. castors provided with the base is 100% nylon made. sizes: back height from ground leve 1000mm, seat height from ground leve 480mm, space between handle to handle 600mm, seat (w) 490mm x (d) 490 back (w) 490mm x (d) 6

State Government

CTN :40200920

14 May, 2025 47.70 Lacs

Patiala - Punjab

Tender For providing and supplying various types of furniture at new tehsil complex dudhansadhan, district patiala - executive table & side tableoverall size : w 2300 x d 1000 x h 750mm & side unit extention: w 1400 x d 550 x h 750mm. table top: 25mm thick pre laminated particle board with 2mm pvc edge lipping supported on v shape aluminium die cast connectors of min size 430 mm l x 110 mm h x 25 mm thick. 4 connectors on main table & 2 on side unit shall be provided. all sides of the worktop except corners of main & side table shall be provided with 2mm thick alumimum extrusion of 40mm + 25 mm + 30 mm + 8 mm formed into horizontal & vertical direction to enable support as well as top surface coverage. edge surface extrusion supporting the worktop to be tappered towards top. support: end legs: 50mm thick pre laminated particle board with 2mm pvc edge lipping & 3 equal drawer pedetal size of 600 x 850 x 570mm (ldh). modesty panel: 18mm thk pre lam board with 2mm pvc edge lipping of 450mm ht. wire management: slide connect with pvc cable dump. slide connect configuration - standard switch configuration no deviation 2 power,2 usb charger,1 network,1 hdmi. sufficient storage space to be priovided in the storage pedestal of the table having drawers at the main table & hinged door storage below the side unit. tolerance of +/- 5mm to be considered for dimensions length, depth & height and tolerance of 5% to be considered in thickness.the furniture brand shall have quality & safety related certifications that is: iso 9001, iso 14001, iso 45001, iso 50001, aiota for educational furniture & office furniture, idm (india design mark) for atlest five products by india design council, bis & (igbc) gold rated factory certification (indian green building council), griha (green rating for integrated habitat assessment) & green pro certification by cii (confederation of indian industries). iso certificates should be from a nabcb/ nabet / qci accredited agency., executive chairhigh back chair leatherettethe overall size of chair shall be:back width : 480mm , total height : 1150 to 1250 mm, back height- 755 mm. seat width : 490 mm, seat depth : 480 mm, seat height : 455 to 555 mm.twin casters 60mm dia with nylon material complying to ansi / bifma x 5.1 2017 standards. the axle pin is rust protected- zinc passivated. the pin is designed to have push fit with lock ring. base: the 660mm pcd (26 inches) five pronged base is made out of aluminium. the base outer diameter shall be 750 mm with casters. gas lift: : single swage class 4 tested -ansi bifma performance standards. the pneumatic height adjustment has an adjustment stroke of 95 -100 mm as per the seat height criteria and 360 revolving. designed with possibility to increase the seat height with gas lift stroke 110-115 mm if required. mechanism: synchro tilt mechanism this mechanism is manufactured out of cold rolled carbon steel is 513-1994 sheets, the steel components are manufactured with highly precision tools for accuracy in matching other parts for smooth functioning. the taper angle should match with the taper angle of gas lift swaging-- 1 26 16 . the steel components are fabricated by using co2 - mig welding process for giving uniform surface finish with higher tensile strength. springs are made out of grade ii material. composite release levers for locking mechanism in 4 locking positions & gas lift height adjustment. arms & back: it is a molded shell with ms frame and upholstered with leatherette. leatherette upholstery: shell is upholstered with 75% pvc & 25% polyester 640 gsm, abrasion- 100000 cycles. foam: cushion with pre moulded foam of 65 kg/m3 density in the shape of the mold.hardness 22 3 kgf. seat is upholstered with leatherette. ply wood: 12 mm thick with 9 ply. it is hot pressed ply - conforming to is 303. this technology ensures long and efficient and safe functioning of the chair without any shake and play in the long run. t

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

State Government

CTN :40127434

08 May, 2025 1.68 Lacs

Jhargram - West Bengal

Tender For wbphe/ee/jmd/niet 05_4 of 2025-2026 - part - a labour charges for 2 (two) nos. operating personnel for operation of pumping machineryof each pump house by automatic panel including operation of valves, disinfection arrangement, internal & external illuminations as per specification and round the clock guarding of the whole installation with all accessories complete as per direction of e.l.c. (w.e.f. 04/06/2025 to 31/08/2025) i.e. 89 days, part -b supervision charges for 2 (two) nos. electrical installation by licensed electrician (as per le rules, 1956 read with lastest amendments overhead expenditure) including incidental charges as per specification & direction of e.i.c(w.e.f. 04/06/2025 to 31/08/2025) i.e. 3 months, add cess @ 1 %

CTN :39872972

30 Apr, 2025 NA

Pune - Maharashtra

Tender For bid to ras supply of mt stores - 10368639 lv7 stln 2815 72 0471249 engine assy , 10313477 lv7 ld 2540 72 015 1483 x 4110900 tarpaulin , 10301155 lv7 awo 2520 012860 0503aa3270n front axle assy 4wd lbpv , 10517286 lv7 awo 10102475 front windshield ballistic glass , 10305974 lv6 mt6 ses def jii 29 latex foam rubber moulded sheet 50 mm th , 10304701 lv6 mt6 lv6 t815 mt6 133 330 071 904 old part no 336 641 372 211 hose 8x320 pn 21 310 94r , 10325064 lv7 t 815 442 889 010 024 central mud guard rh vvn , 10517305 lv7 t 815 hmv 443 319 014 000 direction flasher switch over ruhla 8 , 10314392 lv7 av 15 578 903 910 852 26 cutting control panel , 10337371 lv7 t 815 442 078 690 644 covering sheet , 10321917 lv7 t 815 442 940 070 084 ventilation window glass , 10327293 lv7 t 815 442 973 350 084 door felling rh , 10323361 lv7 t 815 442 076 852 674 line of source filling , 10338454 lv7 t 815 130 071 430 144 shifter rod , 10337843 lv7 t 816 993 100 324 0 remote control , 10341860 lv7 t 816 297 916 008 4 heating body , 10318725 lv7 t 815 990 700 001 000 frame , 10338564 lv7 av 15 112 397 900 000 cuff t20 70x82x9 6 , 10348041 lv7 av 15 578 903 915 252 43 pipe assy , 10334155 lv7 t 815 442 070 211 134 suction tube , 10348355 lv7 av 15 578 003 100 752 41 packing piece , 10320050 lv7 t 815 990 700 388 000 cushion , 10319963 lv7 t 815 990 700 467 000 rest , 10319685 lv7 t 815 025 225 259 000 rear view mirror , 10332790 lv7 t 815 442 170 585 009 release bearing , 10341634 lv7 t 815 5310 249206 wheel nut m 22x1 5 , 10342988 lv7 t 815 443 930 132 640 minus plate , 10321780 lv7 av 15 578 003 922 652 63 elastic coupling 16 52a , 10335519 lv7 av 15 578 003 037 452 80 end piece , 10320027 lv7 t 815 990 700 405 000 bar , 10332123 lv7 t 815 358 821 004 000 valve ecrh em2 v 24 , 10322229 lv7 krz 255b 5200012 wind shield assy , 10336269 lv7 krz 214 2204010 06 shaft propeller fwd rr axle drive , 10313754 lv7 krz 236 1005125 a fly wheel rim , 10333596 lv7 krz 256b 13830028 hose , 10306052 lv7 scania 231631 startting socket , 10302672 lv7 scania 2920 72 047 1629 control box relay 1117253

CTN :39978574

02 May, 2025 20.78 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply of spares/miscellanious items for gis pahalgam for providing reliable power supply during sanjay 2025. - split inverter ac 1.5 ton 5 star hot and cold with avr and other accessories of standard make (for gis pahalgam), servo voltage stabilizer three phase oil cooled p-p 190-450 v : p-n:110-260 v ( with t-oil) , 15 kva (100 ltr. oil capacity), 36v 100ah float cum boast battery charger with full wave rectification for 220v single phase, 50hz ac input supply for (gis pahalgam), 33 kv single core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 400 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc), 33 kv single core outdoor type cable kit for 400 mmsq, 11 kv single core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 630 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc)for gis substaion panel mounted, 11 kv three core indoor cable kit ( plug in tremination type and screened seperable connectors ) for 400 mmsq cable for gis compatible substaion (brand:- euromold, nexans, raychem etc)for gis substaion panel mounted, 33 kv current transformer outgoing (33 kv, 1 , multi ratio multi core 600-300/1a, indoor type) (1 no. per ) for gis compatible 33/11kv station panel mounted, 33 kv current transformer incommer (33 kv, 1 , multi ratio multi core 900-600/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, 11 kv current transformer outgoing (11 kv, 1 , multi ratio multi core 200-400/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, 11 kv current transformer incommer (11 kv, 1 , multi ratio multi core 900-600/1a, indoor) (1 no. per ) for gis compatible 33/11kv station, 11 kv current transformer (11 kv, 1 , multi ratio multi core 600-300/5a, indoor) (1 no. per ) compatible to hartek panels at ais pahalgam, 33 kv current transformer for auxillary (33 kv, 1 , 30/1a, indoor) (1 no. per ) for gis compatible 33/11kv station panel mounted, potential transfromer 33kv/110v (1 , multi core indoor) (1 no. per ) for gis compatible station panel mounted, potential transfromer 11kv/110v (1 , multi core indoor) (1 no. per ) for gis compatible station panel mounted, over current/earth fault (3 o/c and 2 e/f relay abb type for gis compatible 33/11kv substation, providing and fixing 3 layer pp-r (poly propylene random copolymer) pipes conforming to is: 15801, uv stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all pp-r plain and brass threaded polypropylene random fittings. this includes testing of joints complete as per direction of engineer-in?charge. internal work-exposed on wall with clamps at 1.00 meter spacing pn-16 pipe , 25mm od(sdr-7.4) for replacement of damaged pipiline. (for ais and gis )

State Government

CTN :40071789

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing and installation of electrical accessories and allieds works at shaspur pwss, block-rampurhat-ii under bolpur mechanical division - supply, delivery at site and storage of wall mounted made of sheet steel fabricated 2 mm for load bearing & 1.6mm for non load bearing, indoor type, dust & vermin proof, lp-54 degree of protection, powder coated painted with rubber gaskets cover, front lockable hinged door with all switchgear and other items duly wired up and tested as per specification: incomer: (a) 100 amps, tpn mccb with adjustable ol, 36 ka, e/f, auto phase corrector & necessary accessories with suitable spd (i.e., ammeter, voltmeter, cts & switches), outgoing:- (b) 7.5 hp to 12.5 hp, tp star-delta starter with other accessories - 1 nos., (suitable size capacitor bank to improve pf from o.85 to 0.98) (c) yard lighting feeder with necessary accessories & time switch(digital) - 1 no. (d) 3phase actuator valve starter with other accessories -1 nos., (e) 2 hp ,3 ph,415v,clorinator feeder with necessary accessories & level controller-1 no., (f) 32a mccb fdr for iep/misc purpose-1no., (g) 32a mccb for in house light-1no.,(e) plc feeder with necessary accessories-1no.( all spare & components as per vendor list of phed), supply and delivery at site of 15 kva, 3phase, oil cooled type servo motor operated copper wound line voltage corrector conforming to is-9815 (pt.-1)- 1994 suitable for un-balanced input voltage with following specification including first filling oil as per is-335 where applicable.a) input voltage:- 3 phase, main supply may or may not be balanced with respect to phase to phase- 200v-500v phase to neutral-115v-290v.b) output voltage:-3 phase balanced output voltage. phase to phase- 400vor 415v 1%, phase to neutral- 230v-240v 1% (provision should be made to adjust the variation of output voltage per phase by a variable pot oil within 5% of output).c) line regulation:- out put voltage should remain well with 1% of set voltage (from minimum to maximum i.e. either 400v. or 415v. supply variation).d) load regulation : output voltage should remain neutral well within 1% of set voltage be ( from no load to full load ) i.e. either 400v. or 415v.e) correction speed:- better than 35 volt / second.f) efficiency:- better than 95% on full load.g) cut off limit (minimum &maximum ) by limit switch with audio & visual.h) metering indication:- by selector switch provision should be made available to measure input mains supply and output voltage other stabilizer for load current measurement an ammeter with selector switch should be available.i) lamp indication :- for input & output should be provided. ( 3 lamps per side ).j) mcb protection: for input side.k) load protection : hrc fuse on each output phase should be availablel) output over shoot:- beyond 210v to . 255v /phase in case of manual mode & voltage protection :auto mode operation.m) visual indication for under voltage & over voltage of output.n) manual mode:- up & down correction with o / p voltage over shoot protection. beyond 210 v-255 v. per phase.o) nature of cooling:- oil cooled system.p) electric current over load protection .q) circuit for delay output .r) input high voltage cut-off above 500 v.s) mode of operation:- auto/manual with a provision to restore the normal working of the unit standby operation should be available in case of any electronic failure in auto mode., installation of mcc panel along with main switch, changeover, busbar chamber, cut out etc. all electrical equipment within the pump house, drawing of cable properly on suitable size gi cable tray on wall / as per direction of eic as per layout & ie rules and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fixing of materials for taking power within the pump house from wbsedcl end as per direction of eic. [for ph no - i, ii & iii], installation of above supplied stab

Central Government/Public Sector

CTN :40098318

07 May, 2025 99.82 Lacs

Dhubri - Assam

Tender For supply of annual operation and maintenance of electrical and mechanical works at rupsi airport - operation and maintenance of electrical and mechanical installations , job contract for operation and day to day maintenance services of airport systems equipments , execution of item of schedule of rates cpwd dsr 2022 as and when required , testing of transformer oil sample including conducting bdv test and submission of test report etc complete as required , filtration of transformer oil of 630 kva transformer , supply of transformer oil conforming to is 335 1983 , servicing and checking of lt air circuit breaker , servicing and checking of ht vacuum circuit breaker , calibration and testing of relays at ht panel , calibration and testing of following relays at lt and synchronizing panel , scrubbing, cleaning the existing surface of cubicle panel, feeder pillars and painting , lettering of maximum 2 inch size alphabetic or numerical , cleaning the surface of ms chequered plates , supply and replacement of silica gel in breather of existing 630 kva transformer etc. complete as required , lifting and lowering of 10 hp borewell submersible motor pump set , servicing and complete overhauling of 10 hp borewell submersible motor pump set , decoration of terminal building and canopy of rupsi airport , supply and replacement of defective smoke detectors , supply and replacement of defective manual call point , maintenance and service of addressable two or one loop honeywell make fire alarm systems , supply of convertor or driver suitable for philips make 20 w downlight types led luminaires or fittings , supply of convertor or driver suitable for osram make 120w types of led luminaires or fittings , supply of convertor or driver suitable for havells make 18 or 20 w downlight of led luminaires or fittings , supply of convertor or driver suitable for wipro make 36w 2ftx2ft recess mounted of led luminaires or fittings , supply of 1000w 240v lamp suitable for aerodrome beacon , supply of aerodrome beacon , calibration of clinometer , supply of minimum 10 meter high wheel driven telescopic ladder , supply of reflector , supply of 2c x 4 sq mm. secondary lead with plug , supply of b connector or four way porcelain terminal , supply of 5 kv grade 50 hz ac isolating transformer , supply of two pin halogen lamp holder suitable for 200 watt , supply of 5 w screw cap led lamp , supply of wind sock cloth , supply and replacement of led flood light , supply and replacement of obstruction light of wind direction indicator , supply and replacement of 180 ah 12 v lead acid battery , supply and replacement of 100 ah 12 v lead acid battery , supply of automaic electric hand drier , servicing, checking repairing overhauling and testing of crompton make 630 kva transformer

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

Electronic Signage Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector