Latest electronic weigh bridge Tenders | Government electronic weigh bridge Tenders

Central Government/Public Sector

CTN :45438686

22 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of ss sheet sus 301l-dlt - dull finish of size 2 mm x 1250/1500 mm x 2150 mm to jis g 4305 standard. special condition : i) the sheets/plates shall be supplied in bundles with double layer of water proof paper & a bio degradeable plastic sheet of suitable thickness and metal protection in edges. all the sheets up to 2mm thickness shall be protected against corrosion and rust by coating corrosion preventive fluid, soft film, solvent deposited, water displacing to is: 1154. ii)all bundles shall have a minimum of 2 hoopsup to 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling.iii) optimum weight of the bundle should be 2mt+-10%. mechanical damange & corrosionduring transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45441385

25 Jun, 2026 25.0 Thousand

Jhabua - Madhya Pradesh

Tender For installation and operation of 10mt electronic weigh bridge on bot basis of build operate and transfer (bot)scheme at sub mandi yard sarangi,main mandi petlawad ,distt jhabua.annual rate to be quoted.

State Government

CTN :45441362

25 Jun, 2026 25.0 Thousand

Mhow - Madhya Pradesh

Tender For installation and operation of 10mt electronic weigh bridge on bot basis of build operate and transfer (bot) scheme at submandi yard manpur, main mandi mhow distt indore. annual rate to be quoted - installation and operation of 10mt electronic weigh bridge on bot basis of build operate and transfer (bot)scheme at sub mandi yard manpur ,main mandi mhow ,distt indore .annual rate to be quoted.

State Government

CTN :45456131

27 Jun, 2026 25.0 Thousand

Shivpuri - Madhya Pradesh

Tender For installation and operating of 2 plate electronic weigh bridge 10 mt plus 50 mt at mandi yard khaniyadhana under bot scheme

Central Government/Public Sector

CTN :45436216

15 Jun, 2026 NA

Amla - Madhya Pradesh

Tender For supply of set of tools and equipment required for road art/brake down amla (details as per annexure). test certificate should be from nabl approved lab only. - unbranded cantilever tool box, 5 trays, tommy bar octagonal. size- 20mm x 600 mm long., material en8 as per attached drawing., hammer sledge double faced 3.2kgs is:841/1968 table-iii., ball pein hammer with handle conforming to is 841:1983 with latest amendments, specification: nominal mass-500 grams, handle- wood/polymer/fiberglass, material spec: steel grade t65/t70; handle length: maximum 350 mm but shall not be less than 300 mm., adjustable spanner 8", adjustable spanner 12", adjustable spanner 15", set of adjustable spanners & pipe wrenches of sizes 1) adjustable spanner size 10 inch/250mm qty/set-01 no 2) adjustable spanner size 15 inch/375mm- qty/set-01 no 3) pipe wrench size 24 inch/600mm- qty/set1no makes: fwrad0002-d & fwrrt0001-d of eastman or its equivalent of snapon, kingtony, taparia, or venus., wrench pipe chain capacity range 10 - 60,15-90,27 - 115,35-165, steel shovel with metal handle as per drawing number rwf/misc/m/1294, safety goggles designed to effortlessly fit over most prescription spectacles for convenience, temple adjustability enhances personalized fit and ergonomic, rigorously tested for optical quality, ignition resistance and high temperature durability, sterilized and fortified, ensuring technical durability and robustness, durable, clear, and scratch-resistant lens for precision optics and protection, lens scale no. clear:3-1.2, weight: approximately 54 grams, embodying lightweight precision in technical design, certified to en 166:2001 conforms to ansi 87.1-2010., accepted makes: karam es007 or black & dcor or 3m or midas or similar. accepted note: one sample to be got approved before bulk supply., magnifying glass with stand, lens size- 5", magnification- 4x area, 3.2 dioptre lens, reachstand internal concealed, spring mechanism with 900 mm reach from pivot and 600 mm in vertical plane reach from pivot 36" and 600 mm in vertical plane 24", illumination i) led ring with 40 leds in twin rings. ii) power consumption- 8 watts. iii) lumen output- 800lumens. iv) colour temperature-6000 degree kelvin v) nominal lux level at working plane 150 mm-2300 lux. along with accessories for each stand. i) increased magnification attachment dia -50 mm powerful additional lens that can swiung in the field view under the main lens. ii) spot lens dia-30 mm powerful additional lens that is permanently fused on the main lens to provide 16 x area magnification. brand- lensel optics model no - l104sd / greemito/toolstar, measuring tape with lock button size-5 meter (length) x 13 mm (width) case material-abs, blade material-carbon steel, case shape - round, tape colour-, black and white steel measuring tape 30 meter long graduated in mks & fps system to the fractions readable in mm & inch marking in full length of is certified company only, 15 cm spring steel scale, supply of manila rope of size 1 inch as per is:9936(1992). (note: required rope material is polymer braided twisted cord twine string in dia: 12mm) (required in 25mtr +25mtr sapratly), aluminum ladder 6 ft long, sand bucket, water bucket gi

Central Government/Public Sector

CTN :45422689

29 Jun, 2026 NA

Bikaner - Rajasthan

Tender For corded small angle grinder-2200 watt, power supply- 220-240 vac, 50/60 hz, weight - ( approx.- 5.2 kg.) no load speed-8500 rpm, 2200 watt, disc diameter - 180 mm , power sourse- corded electriccable length- 2.5 meter , make- bosch corded small angle grinder or similar [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45407861

17 Jun, 2026 NA

Yadgiri - Karnataka

Tender For supply of drug rack , bag for field visit , chairs waiting area , suction tube , bmw bins three bins , peak flow meter , stethoscope , blood pressure machine digital , thermometer digital , torch , pulse oximeter , feeding tubes orryles tubes , cotton , striped scissors , curved scissors , toother forceps , untoothed forceps , curverd artery foreceps , light weight foldable stool , surgical tray , kidney tray , sterile syringe10ml , disposable gloves , sterile gloves , povodine ointment , hypo allergenic tape micropore na 7.5cmx9.l mts 1x4rolls , dressing trays , adhesive tapesl0cmx10mtr1x3rolls , snellen chart , urine bags , gauze bandages , foleys catheter , sterilewatert0ml , dressing pad , lignocane , savlon or antiseptic , hand sanitizer , disposable mask , wheel chair , wall clock

CTN :45435036

10 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of equipment items > - parallelogram law apparatusparallelogram law of forces apparatus fitted with stand, travelling microscopebranded travelling microscope 0-200 mm horizontal and 0-150 mm vertical measurement (two separate experiment), helical spring apparatusstructure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom. pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading., boyle s law apparatusthe apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsion pendulumtorsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulumone meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, viscosity apparatusstokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), sonometer apparatussonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight -500 gm each to a total of 3 kg. brass wire (5 m), metre bridgetype: 1 m length, with uniform wire (resistance wire) material: constantan or manganin (low temperature coefficient) scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection) range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v), ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, joule calorimeter apparatuscopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, potentiometer apparatusit features a 1-meter to 10-meter constantan/ manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, deflection magnetometer apparatusdeflection magnetometer apparatus with compass box and two short bar magnets, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, ammeterdc (0 -2 amp), voltmeterdc voltmeter; range 0 10 v, analog, decade resistance boxresistance box 12 month warranty (dial type) - mangani

CTN :45430824

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of lab equipment - basic engineering lab materials, digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meterrange 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., digital ph meterph range o to 14, resolution 0.01 ph, digital display, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, mortar with pestleporcelain/agate,gazed exterior, unglazed grinding surface.item weight 2290 gramsitem diameter 4 inches, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, sensitivity 20 a/div, resistance approx. 100 ohms., voltmeterdc voltmeter; range 0 10 v, analog , ammeter dc (0 - 2 amp), cdecade resistance box3 or 4 dials, range 0.1 to 100 or 1k , constantan/manganin wire coils., rheostathigh-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kitseries arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, meter bridgetype: 1 m length, with uniform wire (resistance wire)material: constantan or manganin (low temperature coefficient)scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection)range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v)

CTN :45405307

12 Jun, 2026 NA

Liluah - West Bengal

Tender For corrigendum : supply of ferritic steel sheet 2x1250x2100mm., as per drawing: rdso spec. no. c-k201, grade x2crni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction:stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel)coils. the coil shall be protected in reasonably good condition to with stand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gisheet. iv) side of the coil should be covered with card board sheet. v) after this whole coilshould be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edgeof the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on thecircumference of the eye. ix) whole coil should be mounted on wooden blocks for easylifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. protection procedue: covered in pi [ warranty period: 30 months after the date of delivery ] ]

Electronic Weigh Bridge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector