Get complete information related to latest Emergency Lamp Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Emergency Lamp Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Emergency Lamp Scrap Tenders.
Tender For bid to ras supply of propeller type ac ventilating fans - exhaust fans (v2) as per is 2312 (q2) , electric ceiling fan with bldc motor (v3) isi marked to is 374 (q2) , led street light 120 w having microwave motion sensor the fixture would have an efficacy of 135 lpw as system efficacy and 175 lpw as chip efficacy ip 66 , led light 72 w post top victorian look suspended mounting arrangement to be mounted on poledo fuse element 11kv 5 amp , led bollard ufo shape 2 feet height 10 w , supply only 5 star 1 point 5 ton hi wall split units indoor outdoor complete with cordless remote control unit and with cooling and heating function of capacity complet connected accessories , supply only electric water heater storage type steel body with copper inner tank and heating element up 2 kv capacity 25 litre bee 5 star , supply only water cooler fully stainless steel electric driven single phase having approx storage and nominal cooling capacity of 40 divide 80 ltrs per day complete , smart led street light endprlplussl 120 watt led 730 pasytopic micr sensor base operation detection range 10 metre light , led street light endprlplussl 120 watt led 730 pasytopic micr sensor base , supply only 12 volt 65 ah sealed maintenance free battery for 30 kva online ups installed at hq swc bldg , wall mounting fancy lightfitting 9 watt complete , lt 1 point 1 kv cable and termination joint 3 point 5 core 25 to 50 sqmm , lt 1 point 1 kv cable and termination joint 3 point 5 core 70 to 120 sqmm , lt 1 point kv cable and termination joint 3 point 5 core 185 sqmm , exhaust fan iron body of size 300 mmvolt single phase , xlpe cable joint ht of size 150 sqmm 3 core straight through joint for 11 kv , xlpe cable joint ht of size 185 sqmm 3 core outdoor end termination type , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 2 nos ubolt rm 4mm to 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 1 nos ubolt rm 75mm 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 18 feet 1 nos profile bracket 3 to 2 nos ubolt rm 20mm 4 nos zinc coated nalis 4 nos , heating element 1 point 5 kw large tringle cup type , led spot light 9 watt complet set , heating element 1 point 5 kw round cup type , glass pane pin headed 4mm thick 4 x 3 sheet , glass pane plane 4 mm thick 4 x 3 sheet , galavnised mild wire mess 0 point 90x 15 mtr tube , forged valve 15mm bore half turn , looking mirror 18x 15 mm with plastic frame , lighting arrestors for 33 kv heavy duty set of 3 pc , glavanise wiremesh 5mm dia wire average width 1 point 14 mm wire mesh width 1 point 12 mtr and 50 feet long , straight through joint for xlpe cable 11 kv of 95 sqmm , lt straight through joint 70 to 95 sq mm , indoor end joint 70 to 95 sqmm , straight through joint for xlpe cable 11 kv of 120 sqmm
Tender For supply of led base cab light - a led base cab light with spot light , b led base cab light with spot light , c led base cab light with spot light , d led base cab light with spot light , e led base cab light with spot light
Tender For corrigendum : procurement of machinery and equipment on behalf of directorate of health services hp - cardiac monitor, high pressure high speed horizontal steam instrument sterilizer, phacoemulsification unit, fess endoscopy unit, ent operating microscope, oae(clinical), ent workstations /treatment unit, shaver system cum micro drill, digital mammography unit, analogue mammography machine, computed radiography system for mammography, electro hydraulic operation table for orthopaedic surgery, surgical instrument set (ortho), autopsy(mortuary)table, mortuary cabinet (6- body), laparoscopic set with instruments, ctg machine, delivery table(obstetric labour table), foetal doppler, multipara monitor (obg), video colposcope, suction apparatus, autoclave horizontal, autoclave vertical, autoclave ot automatic, multi-channel electrocardiographic, fogging machine for ot (fumigator), crash cart trolley, infusion pump, retinoscope, indirect ophthalmoscope, electric cautery, laryngo-laryngoscope, digital otoscope, head light(ent), power drill for ortho, power saw for ortho, harmonic scalpel, laparotomy set, single puncture laparoscope for tubal ligation, spot light, note :-1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal
Tender For bid to ras bid to ras repair and overhauling service - upgradation of gym interior of officers gym; interior design; yes; buyer premises: augmentation of interior designing for officers' gymanisum -ins vishw rma-1 false ceiling-providing and fixing suspended false ceiling of armstrong or equivalent (fine fissured micro look with silhouette grid) equivalent of size 600mm x 600mm at all levels fixed with channels & hanger rods & making cut outs for all led lights etc including all material, labour and transportation as per approved sample designs, drawings and specifications as directed by the officer in-charge. item includes dismantling of old ceiling and disposal of the malba. providing ducting after making necessary connections from the main duct . the work has to be executed in co-ordination with the air conditioning system agency and with the officers monitoring the ac system 2) wooden ceiling providing of faux beams in the ceiling as part of the design of the false ceiling. beam size shall be 8" x 8" as per texture and colour finalized . the installation has to be carried out maintaining the aesthetics of the area and as per design finalized including all material, labour, transportation as per approved sample designs, drawings and specifications as directed by the buyer 3) electrical wiring : providing & fixing of 25mm electrical conduits of make akg/polypack/setia or equivalent making chasing in walls & finishing it with plaster making it good for painting & pvc insulated copper wires of finolex/havells or equivalent as per approved samples, design, drawings, specifications & as directed by the buyer, item includes removal of the old wiring and disposal of the malba 4) light fixtures downlighters : providing & installation of led downlighters of 5000k of reputed brand jaguar/philips/legero/syska as per approved samples, design, drawings, specification and as directed by the buyer with testing and commissioning. item includes dismantling of old lights and buy back of old lights with fittings and disposal of all malba 5) track lights & spot lights spot lights : providing & installation of 9w cob lights of reputed brand jaguar/philips/legero/syska as per approved samples, design, drawings, specifications and as directed by the buyer 6) magnetic track lights : providing of suspended magnectic tracks of reputed brand philips/jaguar/ legero/syska or equivalent including 200w integrated power supply, trimless wall corner l jointer for magnetic track channel and hanging kit set. providing of 20w linear laser tiltable spotlight with a combination of cone pendant light as per approved samples, design, drawings, specifications and as directed by the buyer 7) switches/sockets & switch boards providing of switches sockets and all the switch boards of reputed brand i.e. schneider/norisys as per approved samples, design, specifications and as directed by the buyer 8) ceiling and wall painting cleaning and sanding of the surface of the ceiling and wall and application of 1st coat of oil base primer. upon drying of primer, application of 2 coats of birla wall putty. upon drying, sanding the surface to a smooth seamless finish and application of 2nd coat of oil base primer. upon dring of the primer application of 3 coats of emulsion of royale teflon finish as per approved samples, specifications and as directed by the buyer 9) wall panelling providing and fixing in position wall panelling at all heights with pvc wall panel/sheets (5-9mm thickness) of approved texture, design and patterns having nrc (noise reduction co-efficient) of 0.50 (minimum), light reflectance of 85% (minimum). non combustible fire performance as per bs:476 , humidity resistance of 100% , thermal conductivity <0.043 w/m k comprising of frame made in the wall from specially fabricated galvanized mild sheet 0.50mmthk pressed section (galvanizing @120grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 fixe