Emery Paper Scrap Tenders

Get complete information related to latest Emery Paper Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Emery Paper Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Emery Paper Scrap Tenders .

Filter

Loading....

Get Tender in Email

Central Government/Public Sector

CTN :38567964

26 Dec, 2024 NA

Hubli - Karnataka

Tender For supply of electrically operated lifting barrier with hand generator each set consisting of 2 no s. of lifting barrier pedestals, each with 8 contact circuit controller with top roller type limit seitches (as per design given in specification & approved by rdso) hand crank, electric motor 110v dc, 2 gi sheet booms of 32 ft length (4 section of 8 ft long each) with new octagonal shape as per rdso approved drg. no. rds o/s-11600 without fringes, with 2 stop boards and boom light boxes, ms counter weights and 02 nos. of bo om supports with motorized/ solenoid boom locking along with 01 no. of hand generator cum control panel to operate 2 barries of a set with 1 selector switch, 3 buttons and 5 indicating lamps, contractors mcb's an d relays as per rdso spec no rdso/spn/208/2012 or latest. [ warranty period: 30 months after the date of delivery ]

CTN :38553069

02 Jan, 2025 28.92 Lacs

Uttarakannada - Karnataka

Tender For custom bid for services - upgardation of nom tensile structur-fabrication work- fabrication of vertical member galvanised iron 150*150*1.6 mm box section frames for, entrance canopy size 140feet (07 nos weighting 500 kgs, fabrication of harizontal 100*50 mm 16mm gi box, frame, (a) size-400 feet (20nos) section size-600 feet (30nos) weigning-1200 kgs for ceeling, fabrication of vertical section member of galvanised iron 60*40*1.6mm for blocking the view & beaufication of venue - weighing 1900kgs, fabrication of circular ribs cross section supporled on the glavanised pole size +8+200mm for beautification of bar counted- weighing-450 kgs, fabrication of raise wooden metal fabrication table, acp panneling for entrance canopy, sheet roofing with sunglansed polycarbonite sheet, setting up of bar counter, circular counter for serving with services providing of shelves for storage of bottle, providing of under counter refrigerator providing/fixing of customises basin sink, plumbing work, providing/fixing of under counter storage shelves size-10ft 2.5ft*2feet+10nos, providing/fixing of l shape counter with wooden laminate 19mm ply size-5ft *2.5*2ft application of alluminium composite panneling for back drop of bar counter, providing & fixing vertical racks for display beautification of counter size (10ft 6ft) fixing of inverted glass holder, high raised stool, surface preparation application of one coated oxide primer on the fabricalled structure, providing & application of powder coated antirustblack coat colour then on existings & jr new frames, painting work, +, providing & application of wave theme paint coat on the vertical ribs strcture, electrical work, providing & fixing of inverted hanging antique lights for beautification to light up the venue space, providing & fixing of spot light for the internal fabricated false ceeling & bar counter, providing/fixing of profile led lights for beautification, electricalpoints, switch/sockets/modular box, with, wiring2.5 sqmm 2 core (including laying) 1.5sqmm*2 core*150*95, cable concealed conduit pipes, main junction box, electrical labour charge, providing/fixing of projection screen 10+6, feet, led neon name board for venue 4ft*1.5ft, transportation as actual loading/unloading alabour charges, design consultant fee

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

Central Government/Public Sector

CTN :38444484

18 Dec, 2024 NA

Multi City - Multi State

Tender For supply, installation, testing & commissioning of kitchen equipment s in the new dining hall kitchen along with hvac (heating, ventilation, and air conditioning) works at iiit sri city, chittoor as per the specification - supply & installation of storage rack fully ss 304 gradetop : 1.2 mm thickness salem stainless steel sheet - matt finished, under shiffnershelf : 4 noslegs : 40x40 1.5mm thick square ss pipe,bush : adjustable nylon bush.the process with cnc cutting, cnc bending tig welding 5 stage with matt finish including cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-chargesize : 900 x 450 x 1800 mm ( l x b x h ), supplying of 500 kg capacity moving platform ss hand trolley with 360 degree swivel wheel ph500s including cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-charge, supply & installation ss 304 - 4 door vertical chiller - top cover made out of 18g ss sheet, unit shall be of full ss construction with interior and the exterior of 20/22swg ss. the inner wall will be suitably insulated with puf. it should have 4 self closing doors, constructed of 22 swg ss adjustable wings inside. it should be fitted with digital temperature indicator, control switches and indicator lights. the equipment should be able to maintain a temperature range of +2 c to +8 c. the unit shall be provided with a removable ss drip tray below. the compressor unit will be bottom mounted and should be of a reputed make from kirloskar. legs should be made of 38mm x 16 swg ss pipe with adjustable nylon bullet feetincluding cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-charge, supply & installation 2hp 2in1 pulveriser (regular) chamber size:10x4size (l*w*h): 24x12x34weight: 45 capacity p/h. :12 - 15 kgincluding cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-charge, supply & installation tiliting grinder-capacity : 20ltrmotor : 2 hpincluding cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-charge, supply & installation work table ( t/ b ) fully ss 304 gradetop : 1.5 mm thickness salem stainless steel sheet - matt finished,bottom : one under shelf by ss sheetlegs : 40x40 1.5mm thick square ss pipe, bush : adjustable nylon bush..the process with cnc cutting ,cnc bending tig welding 5 stage with matt finish including cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-chargesize : 1200x600x850 mm (l x b x h ), supply & installation work table with sink fully ss 304 gradetop : 1.5 mm thickness salem stainless steel sheet - matt finished,legs :40x40 1.5mm thick square ss pipe, bush : adjustable nylon bush..the process with cnc cutting ,cnc bending tig welding 5 stage with matt finishincluding cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-chargesize : 1200x600x850+150 mm (l x b x h ), supply & installation ss 304 bain marie made with ss 304 top 16 g tick.the water chamber made with 18g tick with 3 side cover with 1 nos u/s ..the unit with plate rail and dip tray.the gn pan size 1/1 150 mm - 5 nos .the unit with 3 kw heating coil and on and off switch and thermostat .the process with cnc cutting ,cnc bending tig welding 5 stage with matt finish including cost of all materials, transport, lead, lift etc., complete as per the instruction of engineer-in-chargesize : 1800x600+300x850 mm ( l x b + r x h ), supply & installation ss 304 - pickup counter with tray slider - top cover made out of 16g ss sheet, 3 sides covered made out of 20g ss sheet, u/s made out of 18g ss sheet.legs made out of 40mm ss square pipe of 16g ss thk,with adjustable nylon bullet finish. the process with cnc cutting, cnc bending tig welding 5 stage with matt finish including cost of all materials, transport, lead,

Loading, Please wait...

Emery Paper Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector