Latest end plate Tenders | Government end plate Tenders

Central Government/Public Sector

CTN :40884899

10 Jul, 2025 38.8 Thousand

Jamnagar - Gujarat

Tender For providing of repair and overhauling service - port and stbd navigation light base plate and door hinges perished due to aging. same needs to be fabricated and fitted as per the sample (mat: ms, qty: 02).

Central Government/Public Sector

CTN :40886151

08 Jul, 2025 NA

Medak-T - Telangana

Tender For supply of bottom end plate_ g6a1x15486_ 25 kw fuel cell system , sg9715673031_ top end plate , sg9711213010_ current collector

State Government

CTN :40872507

14 Jul, 2025 1.26 Crore

Multi City - Karnataka

Tender For re babbiting-dismantling of bearings and pads from housing,rebabbiting of 10 nos tgb thrust pad along with all accessories,rebabbiting of turbine guide bearing, mid bearing & end bearing along with floating seals and all accessories,material composite test, ut test and dp test should be done for re-babbitted material,assembly of re-babbited bearings with blue match,submitting the video graphs of re-babbiting and reports of re-babbiting.re-alignment-the reason for shifting of generator shaft by 2 to 3 mm shall be analyzed and rectification works needs to be carried out,complete dismantling, assembling, painting and re-alignment of machine shaft,inspection of turbine shaft journal surface and repairs if required,inspection/replacement of worn out bushes and seals of guide vane, if necessary,inspection and repair of labyrinth ring, face plates, guide vanes and runner,guide vanes bed setting,tgb water cooler descaling work to improve the efficiency of cooler,complete assembly of machine,checking the magnetic axis of the generator and to ensure its alignment, checking of the unit leveling at all places and complete alignment of machine shaft,testing & commissioning of complete machine,painting of entire machine,checking of vibration & site balancing of machine,submission of vibration, balancing & alignment reports.flow switch-supply and installation of flow switch (flow rate110 lpm) along with 01 no 01 nc contact for inlet and outlet lubrication oil pipelines,supply and installation of pressure switch (30bar) for inlet and outlet lubrication oil pipelines,supply and installation of level switch for in tgb oil sump.replacement of new miv trunion shaft-dismantling of miv counter weight, miv servomotor assembly, and other related parts,lifting of miv from the bed,transportation of miv to the firms place, if required,replacing old nitrile rubber trunnion seals with existing profile by new one on both sides,replacements of miv trunnion shaft. providing of necessary drawings,material composite test, ut test and dp test should be done for new trunnion shaft & trunnion seals, bushes etc,all related fasteners and dowel pin to be replacing by new one,drive and non drive end trunnion bush, cupseals, stop end plate, washer ring etc need to be replacing by new one,repair of miv discand main body to be attended, if required,supply and replacement of miv disc rubber seal,pressure testing and commissioning should be carried out as per standard in presence of kpcl engineers,all tools & tackles required for the above mentioned works shall be arranged by contactor only.

CTN :40870231

18 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of hex screw , bolt , clip(fig no- 4211) , o ring (ctlg fig-64) , o ring(fig-20) , o ring , nut , o ring , gasket , washer spring , plug (fig-2110) , washer cylinder head(ms sl-02) , o ring , coller(fig-2025) , washer , hex nut , pin , washer spring , ring snap , o ring (ms sl-251) , o-ring , rotor , ojde spanner 18x21 mm , knob(ctlg fig-2075) , spnr 8x9 (odje) , bushing , combination pliers 200mm , hammer , plug , bolt , key , woodruff , stopper , dust indicator(fig-1410) , bolt cross pin(fig-2085) , hose , wire harness , seal oil , interlock shaft(fig-24&2135) , lock , tube , lever , hose(fig 4130) , clamp , adjustable spnr (10-25mm) , cross head , connector , inlet , valve , evacuator(fig-1410 oblique 11) , gasket , 10 mm socket(sl no-g15313) , o ring , insert valve seat(n495c) , lamp indicator eop , oil seal , seal rectangular ring , spnr ojde 10 x 12mm , bolt , connecting rod , element super to by pass filter (ms sl-69) , delivery valve assy , rod , t-handle universal type 1 by 2 inch (300mm) , water temp gauge , key switch (ctlg fig-07 & 1060) , ojde spanner 36x41 mm(sl no-g15313) , tag (ms sl-189) , net(fig-49) , o ring(fig-21 by 30) , 13 mm socket(eqpt sl no g15313) , techo hour meter(fig-1055) , band , bonnet , plug (fig no 3025) , seal oil , plug , hydro meter , gasket , switch(fig-6211 , sl no-11) , socket wrench 17mm , socket wrench 29mm by 30mm , 19 mm socket(sl no-g15313) , gasket gear cover , hour meter cable(ispl fig-15a) , nipple (fig no-102) , bushing , gasket , sealing ring for 4 (mico) , 32 mm socket(sl no-g15313) , housing , rocker , brg needle , socket wrench 19mm , lampassy , cap(fig-1410 by 27) , shaft , element fuel filter , cup , adjustable wrench 200mm , gasket cylinder head(n743) , bolt , tube assy , gasket , cover , tube fuel supply , fork gear shift 5th , bearing , hose(fig-66) , nipple , nut rod (ms sl-06) , bushing front idler , magnet , cover , band brake , o ring , tube , fan belt(ms sl-62) , cover , governor , screen , hose , service kit , positive connector , kit wire harness (os sl no-1567) , element outer , lever gear shift(ctlg fig-2075) , field coil , bearing assy , tube , clutch plate , tube (os sl no-639) , holder , blade cont lever a (fig-6075) , bearing , ball , exhust pipe , push rod , cover , rod , rod , bracket , tube , injection no 6 , plate , cover strainer , tube , cap (fig no 7006) , bracket , plug(fig-39) , gear guide (5m) , filter assy , lever , 12.7 mm nominal size sq drive socket(sl no-g15313) , bracket , feed pump assy , centrifugal oil filter assy , gear driven 4th , lever (fig-6015) , universal joint 75 mm(sl no-g15313) , hose , gear guide , pin cotter , nut , bracket , arm , pump housing(os sl no-542) , bearing end plate , overflow valve , field coil assy , valve assy , support , cover , water outlet (os sl no-651) , housing , hub , pulley , light , rotary switch , intermediate bearing , bracket , seat operator , quick drop valve lh (fig-6096) , gear driven 1st , housing thermostat (bd80eng fig no 1710) , guard inner lh , valve prassure , case , board floor , dfrive assy , cage bearing lh , bracket rh , pump assy , cylinder block gasket kit (60 items ) fig no k2 , bracket , armatureassembly(lucus) , flange brake drum (fig no 3005) , manifold , exhaust , middle , manifold exhaust front , bracket assy lh , cylinder head gasket kit , armature assy (ms sl-599) , heater , air , mc pump assy(ctlg fig-17) , tube cylinder , tool box , hydraulic tank assy(fig-6015) , pump fuel (ptg mvs) , turbo charger assy(tel) , shaft bevel gear , tank assembly(fuel tank)(ctlg fig-1025) , camshaft , frame rh (p-255)

CTN :40608417

30 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For bid to ras supply of retrofitment kit , oil seal , carpet floor tunnel rear , hose , tank assy washer , sliding hammer , handle door , channle glass bottom , tapper roller brg (od-76.2 id39.688 w , bush clutch release , plug bleeder , weather strip back door opening , gear speedometer , trim door lh , lock side window rh , bolt banjo with single hole for lub , gasket water pump , hose water inlet , sash door rear lh , starter switch , insulator , copper washer , insulator , bearing , gasket front end plate , ball joint , spacer ring , earth terminal , hose non metallic , wood ruf key , set screw , ring spanner 16 x 17 metric , de spanner 18x19 , holder assy brush , gasket intake manifold , seal water pump , boot piston , band open stopper , gasket oil pump , spring axle housing breat , ball case , fusible link assy , spring outer , spring select return , thrust washer , gasket , cap oil filter

Central Government/Public Sector

CTN :40555916

01 Jul, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras corrigendum : supply of 7 types of seeker mechanical components - matl code 10153012100033 desc end plate sec1a side- m2 inel drwg no 131 13 02 01 07 01 , matl code 10153012100034 desc end plate sec2 side-m2 inel drwg no 131 13 02 01 07 03 , matl code 10153012100035 desc emi emc filters housing-m2 inel drwg no 131 13 02 02 00 01 , matl code 10153012100036 desc emi emc filters housing cover-m2 inel drwg no 131 13 02 02 00 02 , matl code 10153012100011 desc shell-1b-m2 inel drwg no 131 13 02 01 00 01 , matl code 10152012010014 desc spacer 131 13 01 05 00 07 drwg no 131 13 01 05 00 07 , matl code 10152012010015 desc emi plate 131 13 01 04 00 06 drwg no 131 13 01 04 00 06

Central Government/Public Sector

CTN :40811669

03 Jul, 2025 NA

Guna - Madhya Pradesh

Tender For tender for supply of spares for heat exchangers - supply of gaskets for heat exchanger e-2201 phe model -gld-230-l-5-p-290 , gasket moc- epdm , manufacturer drawing no. gl-230-109875-1 , part no -12 along with one set end plate gasket , supply of channel plates (heat transfer plate) for heat exchanger e-2201 phe model- gld-230-l-5-p-290 , plate moc- sa240 ss-304(0.5) , manufacturer drawing no. gl-230-109875-1 , part no -11 , glue for fixing the epdm gaskets (one no.consist of ltr. pack) , supply of gaskets for heat exchanger e-2201 phe model -gdx-145-l-5-p-339 , gasket moc- epdm , manufacturer drawing no. gx-145-109875-1 , part no -12 along with one set of end plate gasket , supply of channel plates for phe model gdx-145-l-5-p-339 drawing no. - gx-145-109875-2 , plate moc sa240 ss-304(0.5)

Central Government/Public Sector

CTN :40809156

30 Jun, 2025 NA

Bangalore - Karnataka

Tender For supply of four conductor terminal strip for wire size 0.5 sq. mm to 4 sq. mm. (2 pole), 500v as per wa go part no. 262-202 with end plate to wago part no. 262-361 or equivalent make weidmuller, connectwel l and elmex. [ warranty period: 30 months after the date of delivery ]

CTN :40812984

14 Jul, 2025 NA

Kamrup - Assam

Tender For supply of replacement and repair maint work of rpl no 05 and 10 c c - replacement of existing 04 x window transparent glass including aluminum frame of kitchen bainet of rpl no 05 of size 1 ft x 1 ft and thick 4 mm. , replacement of existing of toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 05 of size 2 ft and dia 3 inch. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 05 , replacement of 12 x ss hinges of engine cover of rpl no 05 as per existing specification. , repair and cleaning work of sbs and pbs radiator of rpl no 05 to be required. , supply and fixing of iron cover for sbs and pbs radiator of rpl no 05 of size 3 ft 4 inch x 3 ft and thick 1 mm inclusive all charges. , replacement of existing 02 x iron plate of out side of sbs and pbs toilet of rpl no 10 of size 1 ft x 6 ft and thick 6 mm. , replacement of existing toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 10 of size 2 ft and dia 3 inch inclusive all charges. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 10 , replacement of existing transparent glass of wheel house of size 41 inch x 18 inch 2 nos with aluminum frame and 63 inch x 18 inch 1 no and driver cabin. , repair maint of existing oil tank of davit of rpl no 10 to be required. , servicing and balancing remetalling of alternator shaft of aux engine to be required and replacement of pully of aux engine as per sample of rpl no 10 inclusive all charges. , replacement of existing bracket of sukhan shaft of pbs main engine of rpl no 10 as per existing specification. ) /bid number : gem/2025/b/6372018 * /dated: 22-06-2025 & & / bid document 1 / 14

CTN :40813063

14 Jul, 2025 NA

Kamrup - Assam

Tender For supply of replacement and repair maint work of rpl no 12 c c - replacement of existing 04 x hinges of ramp as per sample inclusive all charges , replacement of existing ms iron beam and garder of ramp of front side of size 20 ft and thick 15 mm , repair and maint of ramp winch balancing problem and handle problem of pbs and sbs , replacement of existing 04 x ms iron air wind pipe of both side of size 2 ft 5 inch and 2 mm thick , replacement of existing 01 x fire hydrant valve and 1 x outlet valve as per sample , replacement of existing roof ms plate of sbs of master cabin of size 15 ft x 2 ft 4 inch and 3 mm thick and including ceiling remove and refixing , replacement of existing ms plate of port side near main engine of size 4 ft 4 inch x 3 ft 6 inch and thick 6 mm inclusive all charges. , replacement of existing ms plate of driver cabin bathroom of size 8 ft 4 inch x 3 ft and thick 6 mm and replacement of tile of driver cabin bathroom of size 5 ft 4 inch x 3 ft , supply and fixing of pvc pipe line connection from water tank to both side or bathroom and offr bathroom with kitchen of size l 185 ft, half dia and and , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm , balancing, remetalling of existing sbs propeller fan with brass metal , replacement of rotary pump as per existing specification , replacement of existing 02 x transparent glasses of master cabin of size 24 inch x 18 inch and thick 3 mm inclusive all charges ) /bid number : gem/2025/b/6371738 * /dated: 22-06-2025 & & / bid document 1 / 13

End Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector