Latest energy saving fitting Tenders | Government energy saving fitting Tenders

CTN :43521424

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of supply and replacement of engine oil , supply and replacement of oil filter element , supply and replacement of fuel filter , supply and top up of coolant , supply and replacement gear oil , supply and fixing of sider rear view mirror , supply and fixing wiper control switch lever left , checking and replacement of rubber bushes of top wishbone and lower wishbone and anti roll bar , repair and cleaning of gear box assembly , supply and fixing of timing belt and timing belt idler , change vacuum hoses for vacuum modulator and turbocharger and egr valve and throttle valve , assembly of ve battery cable , supply and fix fuse box or relay and power steering reservoir , m and l for greasing of all wheel bearing and hubs , checking and replacement of all drives belts water pump, belt tensioner pulley, belt idler pulley, fan pulley, alternator pulley and steering pump and inspection free rotation damaged , repair and replacement of piston assembly , assembly of clutch kit , supply and replacement of wiper and windshield waser fluid tank. , complete check of ignition system cleaning of power formed battery connection check and provide distilled water incl cost of battery fully charging , head lamp checking and replacement of head lamp with connection wire , wheel aligment and balancing complete including settle of toe and coster angel of all wheel and addition of weight , supply and replacement of left side head light , supply and replacement of rs side indicator light ) /bid number : gem/2026/b/7095828 * /dated: 09-01-2026 & & / bid document 1 / 21

State Government

CTN :43511029

19 Jan, 2026 3.42 Lacs

Morena - Madhya Pradesh

Tender For hiring of inspection vehical for light machinery and e/m sub division morena

CTN :43514845

16 Jan, 2026 NA

Jummu - Jammu And Kashmir

Tender For providing of light inspection vehicle as mahindra bolero, scorpio of recent and make model not before 2023 on hire charges basis including pol for an average run of 2000 km per month mileage exceeding 2000 km shall be paid extra at the quoted rates

CTN :43516682

16 Jan, 2026 7.97 Lacs

Mumbai - Maharashtra

Tender For construction of anechoic chamber for society for applied microwave electronics engineering and research (sameer) at sector-7 cbd belapur, navi mumbai. sh: rcc frame structure with pre-fabricated roof including all mep services and development works like external water supply connection, storm water drain, internal road, electrical services connection, street light etc. for society for microwave engineering and research (sameer) at sector -7 cbd belapur, navi mumbai. sh: hiring inspection vehicle for senior architect-ii, pratistha bhavan, m.k. road, mumbai-20.

CTN :42972379

12 Jan, 2026 NA

Lucknow - Uttar Pradesh

Tender For bid to ras supply of repair maint of tata xenon vehicle at af stn memaura : - servicing and cleaning of radiator complete , coolant , labour charge , complete vehicle servicing with replacement of following spares , fuel filter , air filter , oil filter , bypass filter , engine oil make castrol servo hp , gear oil make castrol gulf bosch , grease make servo , fan belt , distill water , labour charge and water service , complete checking repair of brake system , brake oil make bosch tvs waxpol , brake shoe front and rear , front and rear oil seal , wheel cylinder assy front with nipple , wheel cylinder assy rear with nipple , labour charges , checking repair to electrical system with complete inspection , wiring complete with ignition switch assy , horn 12 volt high tone , wiper motor , wiper blade with wiper arm assy , head light , indicator lamp , battery lead , complete checking repair to suspension and steering system , front suspension bush kit , ball joint kit , steering ball joint , centre link assy , tie rod assy , shock absorber , coil spring , tie rod end rh oblique lh inner and outer , supply and fix of the following items , seat cover , steering cover , wheel rim cap

CTN :43487688

17 Jan, 2026 NA

Bathinda - Punjab

Tender For tender for supply of lv6/mt1 4730-000008 nipple grease button head 1/4bsf , lv6/mt1 24296 strip clip hose per mtr , lv6/mt11 sk-1/94 chain assy tyre parsons single type for , lv6/mt3 6230-000091 light ext ention inspection no 2 mk-1 wi , lv6-mt6 2786-0199-9999 hose flexible , lv6-mt6 2573-5420-0155 hose , lv6-mt6 000-428-0035j brake hose , lv7/hmv/8x8/al/ x9866300 fuel filter , lv7/stln(vf) 2540-72-015-1433/x-4115800 tarpaulin assy canopy , lv7/ld cvd-x-4735000 screw driver 8

Central Government And Public Sector

CTN :43487702

28 Jan, 2026 1.80 Crore

Goa - Goa

Tender For supply of skill lab d d -- per speculum and prevaginal examination trainer, intrauterine contraceptive device insertion and removal trainer, episiotomy trainer, intrauterine insemination trainer, obstetric examination trainer, visual inspection of cervix, ryle s tube insertion trainer, pleural and ascitic aspiration trainer, flatus tube insertion to be used for per rectal marta basti, early management of trauma and trauma life support, blood transfusion, urinary catheterization male , urinary catheterization female same to be used for intra vesicle uttara basti, basic incision and suture trainer, basic wound care, basic bandaging including compression bandage, incision and drainage trainer, basic fracture and dislocation management trainer, examination of breast lump, examination of swelling, per rectal and prostate examination trainer, trauma man, anaesthesiology lab kit, basic bandaging, simulator for adult auscultation, adult body resuscitation mannequins, basic life support bls crp mannequins, intubation head trainer, full-size adult manikin male, intravenous training arm, intra muscular injectable training model, intra dermal subcutanous injectable pad , intraarterial injectable training model, intra articular training model, intra-cardiac, epidural and spinal injection trainer, abdominal examination trainer , nursing trainer for decubitus , chest auscultation trainer (advance) , spirometry, blood sampling trainer, ultrasound mannikins , advanced child airway management trainer with stand, infant airway management trainer with stand, heart and lung sounds 5 year old, paediatric arm light, infant iv arm, small injection pad, neonatal simulator, neonatal exchange transfusion trainer, advanced pediatric patient simulator - skill lab | quantity - 182

State Government

CTN :43458956

26 Jan, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of point machine and various other items as per boq attached inspection rdso rites consignee. - supply of point machine irs type 220 mm stroke clamp type as per irs s$-24/2002 (amendment 1) or latest.(inspection agency:- rdso), supply of q-series led ecr (universal type i.e.qecx-61), 4f/4b complete with plug board(base plate), connectors, retaining clips etc. and conforming to brs: 941a sts / e / relays / ac lit led signal / 09 - 2002, amdt.-1 or latest and rdso spec.no.irs: s - 34, s- 23 or latest, as applicable. the interlocking code for this unit shall be "abdhk". (inspection by rdso)., contactor unit (qbca1 type), 24 v dc, 2hf / 4b complete with plug board (base plate), connectors, retaining clips etc and conforming to brs- 943 and rdso specn. no. irs : s - 34, s- 23, s - 60 or latest, as applicable. th e interlocking code for this unit shall be "bcejk". (inspection by rdso)., q-series magnetically latched neutral line relay (ql1 type), 11f / 4b, 24v dc complete with plug board (base plate), connectors and retaining clips and con forming to brs-935a and rdso specn. no.irs : s - 34, s - 23 or latest, as applicable. the interlocking code for this unit shall be "abdeg.(inspection by rdso)., supply of basic material to construct unit maintenance free earth as per rdso specs. no. rdso/spn/197 ver. 1.0 or latest to achieve a resistance less than 1 ohm. it consist of following:(a) copper bonded steel electrode of minimum 3.0 meter long, minimum 17.0 mm dia with copper bonding thickness of minimum 250 microns and ul listed and marked = 1 no. (b) earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) copper strip of 300x25x6 mm (meeb) = 1 no. (e) copper strip of 150x25x6mm (seeb) = 1 no. (ii) supply of 35 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting main earth electrode to meeb in the equipment room in duplicate. (minimum 10 meter.) (iii) supply of 16 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting meeb to seeb and spd to meeb (minimum 10 meter.) (iv) supply of 10 sq. mm multi strand single core pvc insulated copper cable as per is: 694 for connecting various equipments to seeb (v) supply of copper lug sleeve for 3/16 cable.(inspection by consignee)., supply of master telephone with voice logging facility for electronic lc gate telephone system as per specification no: rdso/spn/tc-51/2011 revision 3.0 with amendment no. 1 or latest. (inspection by rites)., electronic lc gate slave telephone system with voice recorder as per rdso specification no. rdso/spn/ tc/51/2021 revision 1.0 (inspection agency:- consignee), supply of centralized power supply system 24 volts dc power pack with 7ah mf battery for electronic lc gate telephone system as per rdso spec:- no. rdso / spn / tc / 51 / 2011 (rev. 3.0) amdt - 1 or latest.(inspection agency:- consignee), supply of optical power meter, type-b, as per tec spec. gr / opm - 01 / 03 feb. 2005 or latest. (make & model khushicom-k280) or similar branded make. (inspection by consignee)., supply and testing of optical laser light source of make- jdsu model- ols-35 or similar branded make.(inspection agency:- rites), supply of optical laser torch of reputed make. (make & model-proskit mt-7530) or similar branded make. (inspection agency: - consignee), supply of automatic fusion splicer for single mode optical fibre cable, along with accessories as per tec spec. tec/gr/tx/osm 001/04/sep-12 or latest of make superior/fujikura or similar. consignee shall approve the supply only after successful demonstration at site. (inspection agency:- rites), supply of otdr suitable for 1310/1550nm fiber with resolution of 60 cm, dynamic range of 314/29 db with all accessories for working on single mode optical fiber as per tec spec. tec/gr/tx/otd 001/05/sep-19 or latest, of reputed make like yokogawa/zdsu/viavi or similar. consi

Central Government And Public Sector

CTN :43462443

27 Jan, 2026 45.19 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and job work under special repair to restoration and conservation of tomb of saiyed saif khan and his mother majhera muzaffarnagar 2025 2026 - items to be executed, unslaked lime, surkhi, c. sand, gur, belgiri, gum, brick aggregate 20-25 mm, 2nd class brick, kakkar stone, white marble, 65mm thick red sand stone 10 sqm, grey/white sand stone, rr stone, 65mm thick red sand stone 10 sqm (for arch), lakhori brick, tile bricks, mud including top finish, kail wood sleeper, raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge., ruled/ flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {one lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2 marble dust}. (the rate is inclusive of all materials & labours involved except scaffolding)., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineerin- charge., providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works., "earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of soil.", surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 all kinds of soil, "demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. nominal concrete 1:4:8 or leaner mix (including equivalent design mix)", provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 1.00m. the pit is divided in to three parts & cement plastere, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, provision for the purchasing of essential article and t & p for the proper execution of the work i) pvc sheet, ii) pvc pan (tasla), iii) hammer with handle 1kg, iv) iron chisel 4",6", 8", v) pvc bucket, vi) pvc mug, vii)wire & coir brush, viii) wire & coir brush, ix) gum boot pvc in pair, x) pvc pipe 1", xi) wooden handle (fawra, hammer), xii) first aid box with medicine, provision for drawing and documentation charges including inspection of exis