Tender For corrigendum : supply of t&p material under dapoli-i subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp
Tender For corrigendum : supply of t&p material inder lote subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp
Tender For corrigendum : supply of t and p to khed subdivision - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp
Tender For corrigendum : supply of t&p material under dapoli-ii subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp
Tender For corrigendum : supply of t and p material under mandangad subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp
Tender For corrigendum : supply of maintenance safety t&p s as per specifications. - fibre d.o rod (ht), safety helmet en 397 2012( yellow colour), cum along clamp, nylon/manilla rope 10 mm dia, nylon/manilla rope 15 mm dia, crimping tool for all type of lugs, single sheave al. roller
Tender For tender for supply of providing making and fixing in position wooden almira with aluminium framed glazed shutter of size approx 2840 , 590 , 2310mm ht depth approx 590mm 600mm , as per approved design , the almira top , bottom , side , partition , shelve , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface , unit back shall be consisting of 6mm thick commercial ply , all the exposed edges shall be covered with 20mm to 25mm wide edge binding pvc tape , aluminium shutter with 45 , 25mm profile panel fixed with 8mm thick fluited glass of approved shade , the cost including all necessary , cotton rod , hinges l vihari 0 , nails , screws , fevicol etc. all complete as per the direction of the engineer in charge. front elevation of the almira shall be measure for the payment purpose , providing making and fixing in position wooden almira of size approx 1030 , 530 , 2370mm ht , with aluminium profile glazed shutter as per approved design , the almira top , bottom , side , shelve , partition , drawer head , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer and inner surface , drawer side , drawer back , base , unit back shall be made up of 12mm commercial ply , shutter shall be made up of 8mm thick tinted glass with aluminium framed shutter as per approved design , all the exposed edges shall be covered with edge binding pvc tape , the cost including all necessary hinge l vihari 0 , nails , screws , fevicol etc. all complete as per the direction of engineer in charge. , providing making and fixing in position wooden showcase unit of size approx 4400 , 580 , 3130mm ht. having two side unit of size approx 990mm width , middle unit of 2420mm width and having one overhead unit of 790mm height. as per approved design , the showcase top , bottom , middle tops , shelve , partition , middle cabinet middle shutter , top overhead shutters , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface , side cabinets and bottom side of middle cabinet shall be consisting of aluminium profile glazed shutter with fluited glass design , unit back shall be consisting of 12mm thick commercial ply , all the exposed edges shall be covered with edge binding pvc tape , both type of shutter shall be fixed with l vihari hinges of hettich or equivalent make , the cost including all necessary hinges , profile shutter , nails , screws , fevicol etc. all complete as per the direction of the engineer in charge. , providing making and placing in position wooden overhead cabinet of size approx 1200mm , 400mm , 600mm ht , as per approved design , the cabinet top , bottom , side , shutter , shelve , unit back shall be made up of 18mm thick hdhmr ply of action tesa or equivalent make , and finished with 1mm laminate on inner surface , all exposed edges shall be covered with edge binding pvc tape , finishing outer exposed wooden surface with high quality high gloss polish of make sirca or equivalent , the cost including all necessary hinges l vihari 0 , nails , screws , fevicol , fastner etc. all complete as per the direction of engineer in charge. , providing , making and fixing in position wooden palmet of size approx 370mm depth and 200 mm wide face , as per approved design , the palmet top , side , front shall be made up of 19mm thick commercial ply of make duro green or equivalent , and finished with 5.5mm thick hdhmr ply of make action tesa or equivalent , fixing on the top ceiling with the help of 100mm fastner , finally all wooden surface shall be finished with high quality high gloss polish of make sirca or equivalent , the cost including all necessary fastner , nails , screws , fevicol etc. all complete as per the direction of engineer in charge. running length