Latest engineering drawing Tenders | Government engineering drawing Tenders

Central Government/Public Sector

CTN :40881836

21 Jul, 2025 48.23 Lacs

Dhanbad - Jharkhand

Tender For installation of centralized ac system vrv vrf for newly proposed mechanical lab and engineering drawing hall of mechanical engineering department at iit ism dhanbad

State Government

CTN :40891049

07 Jul, 2025 NA

Dwarka-Guj - Gujarat

Tender For providing of autocade drawing , tendering service , computer job work , computer service and stationery items

CTN :40885168

19 Jul, 2025 1.40 Crore

Multi City - Multi State

Tender For providing of manpower outsourcing services - fixed remuneration - admin; principal; diploma,manpower outsourcing services - fixed remuneration - admin; superintendent; diploma,manpower outsourcing services - fixed remuneration - admin; training officer; diploma,manpower outsourcing services - fixed remuneration - as per atc and tender documents; iti skill instructor; diploma,manpower outsourcing services - fixed remuneration - as per atc and tender documents; employability skill instructor; diploma,manpower outsourcing services - fixed remuneration - as per atc and tender documents; engineering drawing instructor; diploma,manpower outsourcing services - fixed remuneration - as per atc and tender documents; vocational or craft instructor; iti,manpower outsourcing services - fixed remuneration - as per atc and tender documents; mathematics instructor; diploma,manpower outsourcing services - fixed remuneration - as per atc and tender documents; carpenter trade instructor; as per bid documents,manpower outsourcing services -

Corporations/Associations/Others

CTN :40848437

30 Jun, 2025 NA

Wardha - Maharashtra

Tender For supplying and erecting of various item under m.c.wardha - electrical, design, manufacturing, supply and errection of hot dip galvanised, polygonal stadium masts with fixed head frame suitable for mounting 40 nos. of 500 w led pwd approved make flood light fixtures complete with all accessories as required. the height of the mast from base upto top of head frame shall be 33.0 mtrs. the mast has been designed considering base wind speed @ 44 m/s as per is 875 part-3.mast shall have foundation bolt, 1 nos. li with all accessories and and safety cage ladder for maintance purpose, supply of 500 w pwd approved make led lighting fixtures., making m-25 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10 t/sqmm at 2.5 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete.(for 33 m high mast as drawing enclosed)., supplying and erecting decorative high brightness led luminaires 1x60 watt high efficiency at reduced wattage. the luminaires comprises of specially contoured high strength and anti corrosion mounting on internally threaded pipe of designation m30, cable entries for through - wiring of main of main supply cable, earth connection safety class-i with ip65 protection, ce conformity mark, prewired with led driver suitable for operation on 240 v, 50 hz, single phase ac supply finished with pure polyster powder coated black: similar to specification of "k-lite make model juno - column light (model no. kp-7034)", supply, of external manrider unit with motorized system for accessing the head frame. the unit shall be suitable for safe load carrying capacity of 300 kg with climb speed not exceeding 9m/min., supplying and erecting architecturally designed and structurally sound arched tubular street lighting decorative pole of height 6000 mm, with single arm architecturally designed bracket having overhang of 1000 mm suitable for various pendent type street lighting luminaries material used for tubes steel of grades yst 210 groove technique using high end mig welding process the pole coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethene base black paint. the pole consist of built in control box with cast aluminum service door and safety rope the control gear tray is prewired with mcb, terminal connectors for loop out arrangement the pole surface mounted with base plate of steel of grade e250 as per is2062:2011, complete with foundation hardware on provided c. c foundation., supplying and erecting outdoor stand mounted feeder pillar for 33 mtr. high-mast of the same manufacturer with 1 no. 250 amp. mccb incomer, 4 nos 63 amp mccb for outgoing, 24hr astronomical time switch with minimum 5 years battery backup, 25 a tp contactor for automatic switching of luminaries, 2 no. 9a contactors and raise/lower push button, ryb phase indication 230 vac, 1 phase digital ammeter 0-600 amp., 1 phase digital voltmeter 0-500 va meter, with cts provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 swg crca sheet box with supporting angles, self lock, gasket and slanting top erected on cc foundation complete

Central Government / Public Sector

CTN :40854737

10 Jul, 2025 3.54 Crore

Panipat - Haryana

Tender For providing of custom bid for services - rprc257185-arc for preparation of computer based engineering drawings in engineering services department at panipat refinery (part-a) and pncp (

Central Government / Public Sector

CTN :40685457

03 Jul, 2025 24.49 Lacs

Panipat - Haryana

Tender For corrigendum : custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government/Public Sector

CTN :39237871

04 Jul, 2025 NA

Goa - Goa

Tender For corrigendum : supply of as per ta sl 4 1 and 4 1 1 ups 150w for magnatic compass km 115 08 no 1 and 2 , as per ta sl 4 1 and 4 1 2 ups 300w for keltron v3 1 echo sounder processor and master display , as per ta sl 4 1 and 4 1 3 ups 300w for standared 22nxm gyro supply unit , as per ta sl 4 2 onboard spared for service and maintenance for two years , as per ta sl 4 4 and 5 9 drawing and documentation in both hard and soft format

State Government

CTN :40829139

09 Jul, 2025 10.82 Lacs

Multi City - Karnataka

Tender For 1.collecting sample of released slip rings of the 2nd stage(21.6 mw) units available from site for testing of slip ring for material composition through govt authorised agency 2. taking the measurements of the existing slip rings of 2nd stage units 3. submission of detailed engineering drawing of 2nd stage slip rings along with material composition report for approval 4.dismantling of existing slip ring from 2nd stage generators(2 units) 5. design, fabrication, testing, supply, installation and commissioning of new slip ring of same material composition as that of released slip ring for 2nd stage generators(2 units) 6. checking the performance of newly commissioned slip rings

CTN :39431350

27 Jun, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; installation of ibs onboard ins brahmaputra; service provider-1. services - bridge- degutting of existing cabling of nav radars manta and bridgemaster (bridge, bridge top, post 23, ops room and flyco) 2000 mtrs, 2. services -degutting of foundation of existing units of navigational radars, bridge master, ecdis, mr 212 and manta (location- bridge, ops room, post 23 and flyco) 1 job, 3. services- degutting of units of bridgemaster radar, manta and ecdis. (location- bridge, ops room, post 23 and flyco) 1 job, 4. services-degutting and removal of bme radar antenna 1 job, 5. services-bridgetop- degutting and removal of nav radar pedestals/ platforms (qty-02) 2 job, 6. services - bridge manufacturing and fitment of all foundations for installation of mfcs (qty -03), mfds (qty03), optical bearing device (obd) (qty-02), integrated captain console (icc) (qty-02), dgps (qty-02) 12 nos, 7. services - bridge - installation of mfcs (qty -03), mfds (qty-03), optical bearing device (obd) (qty-02), integrated captain console (icc) (qty-02), dgps(qty-02) 12 nos, 8. services- ops room manufacturing and fitment of foundations of mfcs (qty -02), mfds (qty-05), integrated captain console (icc) (qty-01) 8 nos, 9. services- ops room - installation of mfcs (qty -02), mfds (qty-05), integrated captain console (icc) (qty-01) 8 nos, 10. services- post 23 manufacturing and fitment of all foundations for installation including vdr (qty -01), acos (qty-01), mccb (qty-01), ups (qty -03), nddu (qty-02), network switch (qty-02), battery bank (qty-01), transformer (qty-02) 13 nos, 11. services- ops room - installation of vdr (qty -01), acos (qty-01), mccb (qty-01), ups (qty -03), nddu (qty-02), network switch (qty-02), battery bank (qty-01), transformer (qty-02) 13 nos, 12. services - bridge wings/bridge top - manufacturing and fitment of all foundations for installation of mfd (qty -02) at bridge wings (port & stbd) and mfd (qty-01) at bridge top 3 nos, 13. services- bridge wings/bridge top - installation of mfd (qty -02) at bridge wings (port & stbd) and mfd (qty-01) at bridge top 3 nos, 14. services- captain s cabin fabrication and fitment of foundations for installation of mfd (qty -02) at captain s day/night cabin 3 nos, 15. services- captain s cabin - installation of mfd (qty -02) at captain s day/night cabin 3 nos, 16. services - renewal of cable trays (60 mm). (provisioning, installation and renewal of old cable tray including hot work). 500 mtrs, 17. services- manufacuring and fitment of cable conduit 60 sq mm at weather deck 1400 mtrs, 18. services- laying and securing of power cables as per schedule. 1000 mtrs, 19. services- laying of data cable i.a.w cable schedule. 3000 mtrs, 20. services- laying of intra compartment cables as per cable schedule indicated 4000 mtrs, 21. service-termination of old/ unused cables by terminating the shield circumferentially and grounding the core at both ends. 1 job, 22. service for -removal of microtech tiling 1 job, 23. services- surface preparation, deck foundation and deck strengthening for installation of ibs units in all compartments including ops room, bridge, flyco, post, 23, bridge wings (port & stbd), bridge top, captains day cabin/ night cabin and mcr preparation/ strengthening as per drawing. 1 job, 24. services- provisioning of all lagging and welding material during degutting and welding of all devices and compartment. 1 job, 25. services- regutting/degutting of lagging and all other associated units viz firemain line, power supply sockets, cables, trunking etc in all affected compartments due to the installation activities as indicated 1 job, 26. services-fitment of securing brackets on deck head to hold /fasten trunking for cooling system 1 job, 27. services-fabrication and fitment of trunking from deck heads to all cables as per cable route 1 job, 28. services- manufacture and fitmen

Central Government/Public Sector

CTN :40782004

26 Jun, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : primary vertical damper for train-18, emu us & memu us coaches.1. firm has to submit oem drawings with detailed dimensions & characteristics. 2. type test shall b e conforming to rdso cg-18005 (latest revision) or en-13802. 3. service trials shall be a s per rdso cg-18005 (latest revision). special condition : 1.proto type sample (including type test)to be got approved from icf before manufacturingfor bulk supply. 2. the firm s who have already supplied the same item need not get fresh prototype approval, as pe r drawing: train18/mc/ac-0-1-009, item-1, alt 'b'--- and in compliance to rdso specification rds o/cg-18005---- or en-13802 (latest revision)., packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplie r. [ warranty period: 30 months after the date of delivery ]

Engineering Drawing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors