Latest engineering item Tenders | Government engineering item Tenders

CTN :42082889

30 Oct, 2025 NA

Kupwara - Jammu And Kashmir

Tender For bid to ras supply of ismb 150mm x 75mm x 5.80 mtr or beam conforming to relevant is as per tech spec , ismb 150mm x 75mm x 3.50 mtr long for beam conforming to relevant is make tata or sail of jindal or as per make appx att. , ismc 75x40 3.5 m long welded with plate 250x250x6mm on one side with holes drilled as per tech spec , srt 1630 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant is as per tech spec , steel roofing trough of size 1700 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant is as per tech spec , srt of size 1270 x 613 x 180mm made out of 2 mm thick hot rolled carbon steel sheet as per tech spec , pbs roll of size 20m x 0.90m weight of each roll shall not be less than 42.50 kgs as per tech spec , hdpe sheet 400 micron as per tech spec , hdpe sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , load bearing concrete pcc solid blocks of size 400mm x 200mm x 200mm as per tech spec , pre prefabricated steel door confirming to is 1038-1938 of size 900mm x1800mm as per tech spec , ms hexagonal nuts. bolts and washer 12 mm dia 40 mm long as per tech spec , plywood 8 ft x 4 ft x 12mm thick as per tech spec , cgi sheet 810 x 1830 mm long 0.63mm thick as per tech spec , red oxide primer conforming to relevant is as per tech spec , thinner sample to be approved before supply , m sand conforming ton relevant is as per tech spec , stone aggregates to be crushed rock or gravel 20mm graded confirming to relevant is , stone aggregates to be crushed rock or gravel 40mm graded confirming to relevant is , stone aggregates to be crushed rock or gravel 63mm graded confirming to relevant is ) /bid number : gem/2025/b/6737267 * /dated: 27-09-2025 & & / bid document 1 / 22

CTN :42343165

10 Nov, 2025 3.63 Lacs

Sandur - Karnataka

Tender For supply of materials for metlling roads krishna nagara gp under mgnrega 2025-26 - crushed stone chippings 13.2 mmk1x, granite metal 20 mmk1x, granite metal 40 mmk1x, crushed stone course aggregate 53k1x, vibratory roller 8 tonnek1x, water tankerk1x, gravel 2.36 mm or murrum k1x

CTN :42404054

31 Oct, 2025 20.22 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of pre fabricated or 40 men living shelter made up of steel structure and hybrid pir,aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded,aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded complete,manufactured sand,bricks common burnt clay building bricks sub class b modular size designation 75kgf cm2,white cement,water proof floor silica panels of size 600 x 600 mm with minimum thickness of 10 mm,non skid ceramic tiles coloured 7 to 8 mm thick in floors etc,prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups as per drg,form work type 2 timber form work material for columns,ms clamp msde of ms flat 40 x 4 mm 200mm long bent in l shape with two holes of 12mm dia on each end. 04 x nut and bolt of size 10 x 50 mm with washer.,rapidite quick setting liquid,liquid water proofing compound,pvc ceiling rose 2 3 terminal with pvc square box complete with screws,led tube light fitting 1 x 18w 4 fee

CTN :42327870

06 Nov, 2025 23.41 Lacs

Bagalkot - Karnataka

Tender For supply of materials for execution of civil works in ramasagara grama panchayth under mgnrega kampli tq bellari dt - rms-three wheel 80 100 kn static roller, rms-tipper 5.5 cum with 10 tonne capacity, rms-add 24 percentage centering charges since centering area increased, rms-binding wire, rms-tmt bars fe 500, rms-broken granite metal 10 mm, rms-mixer concrete 1 cum capacity, rms-portland cement, rms-coarse sand zone iii, rms-broken stone aggregate 12 mm to 10 mm size, rms-broken stone aggregate 20 mm size, rms-unit cost as per the specification, rms-crushed stone chippings 13.2 mm, rms-granite metal 20 mm, rms-granite metal 40 mm, rms-crushed stone course aggregate 53, rms-vibratory roller 8 tonne, rms-water tanker, rms-gravel 2.36 mm murrum

corporations/Associations/Others

CTN :41508588

29 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c

Central Government/Public Sector

CTN :42233621

30 Oct, 2025 NA

Raigad - Maharashtra

Tender For supply of engineering items (pr-2721) - 1. ismc 150 ismc 150 x 75 x 6mm thickness confirming to is specification. hsn no. 72165000 qty-1000.00kg 2. isa 65 x 65 x 6 confirming to is specification hsn no. 72165000 qty-500.00kg 3. isa 75 x 75 x 6 confirming to is specification hsn no. 72165000 qty-500.00kg

Engineering Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector