Latest epoxy coating paint Tenders | Government epoxy coating paint Tenders

Corporations And Associations And Others

CTN :40200555

13 May, 2025 48.62 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for a

State Government

CTN :40144206

07 May, 2025 NA

Mandsaur - Madhya Pradesh

Tender For corrigendum : enquiry for supply of consumables as per schedule at gandhisagar hps, mppgcl,gandhisagar - hold tite pidilite 200ml std pck (71304114335-01) , pidilite mseal 1kgs (71324493605-03) , araldite huntsman 1kg packing along with hardner , ag4 cutting wheel (braided) make carborenduum/jon bhandari/norton or equivalent 100x1x16mm , ag4 cutting wheel (braided) make carborenduum/jon bhandari/norton or equivalent 100x1.6x16mm (71324514127-01) , sponge 4 inches (71324514254-05) , crc sheet 1.5 mm (4ft x8ft) (71306860730-03) , coal tar epoxy paint epilux ep555 with catalyst 524902 or equivelent (71302101004-03) , cotton waste white (7130405049603) , cotton cloth standard panna of 1.5 mtrs (71324090064-01)

CTN :40055374

02 May, 2025 NA

Rewari - Haryana

Tender For requirement of material at salhawas store. - synthetic rubber bush for 125 cs vt pump size 105x145x180mm., log book printed (200pages) for pump house as per sample., ms bend size 5"x 6" dia., nylone industrial safety cut resistant gloves as per sample make:-crystal, synthetic rubber bush for 150 cs vt pump size 135x175x180mm., araldite epoxy hardner 1.800kg, asbestos graphite packing 08mm dia., synthetic rubber bush for 150 cs vt pump size 115x136x175mm, socket head cap screw 16mmx 60/70mm, steel wire rope (swg) siling suitable for 15 ton load of app. 2 mtr length having both end eye-clamped as per sample, steel wire rope (swg) siling suitable for 15 ton load of app. 3 mtr length having both end eye-clamped as per sample, black polythene sheet, pvc tape roll, 6"rubber sheet pack, 5"rubber sheet pack, enamel paint black make: asian/ burger, turpentine oil, paint thinner, m.s. nut & bolt 27x100mm, m.s. nut & bolt 24x100mm, coupling link bolt for 5/10cs pump with rubber bush and washer, nylon sling 20 ton of 5 meter length, safety helmet with side slot for attachment (make-karam), hackshaw blade d/e, d-shackle 10 ton capacity as per sample, d-shackle 5 ton capacity as per sample, synthetic rubber bush size 120x87x200mm, ci coupling (pump& motor) 50 cs vt pump as per sample., ci coupling (pump) 12.50 cs vt pump as per sample., torch rechargeable eveready brigadier dl 31 3w led torch make : havells /eveready, led flood light 50w havells make as per sample, combination wrench 34 taparia/venus make, combination wrench 38 taparia/venus make, combination wrench 41 taparia/venus make, combination wrench 46 taparia/venus make, synthetic rubber bush 38x70x150 mm as per sample, ht u-clamp for 20mm dia steel wire rope, aluminum thimble 185 sqmm, ci reflux valve 5" both end flanged isi marked, ci reflux valve 6" both end flanged isi marked, pvc submersible copper cable 6 sqmm 3 core make havells/polycab., pvc heliflex pipe 6" dia., al. terminal for 630mm2 (thimble), high voltage fuse 3.3a dghsc 70 amp.(make- busshmann), ht 11 kv electrical insulation rubber mat (make -jyoti & vardhman), the above rates are inclusive of all kind of taxes including gst and other expences like f.o.r. destination and inclusive of all incidental charges, enroute & at destination. nothing extra shall be paid separately.terms & conditions as mentioned in bid document in price schedule.

Central Government/Public Sector

CTN :40181364

09 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of underframe detail items, welding parts and sheet assembly for train set mc 1. 89011004, col-i, alt 'j' - 1 no. 2. 89011005, col-i, alt 'e' - 1 no. 3. 89011008, col-i, alt 'c' - 1 n o. 4. 89011031, col-i, alt 'b' - 1 no. 5. 89011018, col-i, alt 'a' - 1 no. 6. 89011019, col-i, alt 'b' - 1 no. 7. 89011020, col-i, alt 'b' - 1 no. 8. 89011021, col-i, alt 'a' - 1 no. 9. aae11599, alt 'b' - 1 n o, 10.aad11703, alt 'b' - 2 nos, 11.aad11739, alt 'nil' - 1 no, 12.89011006, col-i, alt 'e' - 1 no. sp ecial condition : 1. all items to be supplied in loose condition with properly labelled. 2. fol lowing items from 88911004 are not required: aae11687- 2nos and aae11688-2nos. 3. items are to be bundled and labelled for each drawing as in main description. 4. suitable pack ing to be done to prevent damage during transit, unloading and rust prevention during storage. 5. finished components except ss components shall be thoroughly cleaned and applied with epoxy zinc phosphate primer as per rdso/spec no.m&c/pcn/100 latest to a dft of minimum 60 microns and mdts-094, rev.-01 with amnd-01 or latest shall be followed. f or procedure and colour shade excluding the areas as specified in detail drawings. [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40181582

15 May, 2025 NA

Basti - Uttar Pradesh

Tender For supply of epoxy laminated sheet as per is-10192 grade ep3 thickness -1.5mm [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :39112820

07 May, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

CTN :39711455

29 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2503 op bc bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric wt.as per store list att , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 8mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 10mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 12mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie make-tata , sail , jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite , dr fixit , fevicol , quick setting compound make-pidilite , fevicol , quick fix , cement based paint snowcem make-berger , asian , nerolac , oil bound distemper washable quality of proprietary brand of make-nerolac , berger , asian , birla white wall care putty water resistant white cement make-nerolac , berger , asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer specification as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix , jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5-2004 make-berger , asian , nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal , hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame make-jindal , hindalco aluminium as per store list att , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed make-jindal , hindalco aluminium s

State Government

CTN :39890956

13 May, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of consumable items at wtps. - rust remover wd 40, 400 ml / bottle, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets)., rustolene, fevicol sr 998 (200 ml/tin), emery cloth roll 50mm w x 50 mtr grit 220 extra fine, carborandum make emery cloth sheet,super fine 1000, size: 9"x11"., carbon cleaner spray, contact cleaner oks.2621.t (500 ml spray bottle), red insulating varnish spray-6084 500 ml/tin, thinier 221, multi functional fluid spray oks-601, emery cloth roll 50mm w x 50 mtr grit 120 medium, gi reducer tee 3/4"x1/2" for civil work, petroleum jelly 1kg pouch packing, safety solvent co2 contact cleaner., becktol gray varnish in 1 ltr tin dr.back make, bearing solvent for bearing cleaning & de-greasing purpose (packing 500ml/can), ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, red insulating varnish-class f epoxy insulation & protection coating., copper corrosion remover spray, alluminium corrosion remover spray, gi nipple size 3/4" x 6" long for civil work., ms nipple 1/2", gi tee 1''x1/2'' for civil work., g.i. tee size 25 mm, ms nipple (heavy duty)size 1/2" x 4" lengthbsp std threads, oil stop leak putty 114 gms. pack, teflon tape : size 1/2" width x 12mtr long, fevi kwik tube 3 grams, adhesive hylomer universal blue [100 gms/pkg/nos], blue matching tube camel student oil colour shade ultrasonic black-663 (in 20 ml tube), anabond unadrobic adhesive & sealand no-610, nipple 1/2", nipple 1", nipple 3/4", crc-226 contact cleaner in 415 ml/300 gram spray bottle., becktol red paint, ms nipple size 2", emery paper rough sizesize 220 x 280 mm, loctite 242 thred locking 250 ml/tube, fevi bond, pvc adhesive insulation tape roll size 1.9 cm x 10 mtr x 0.125 mm thick, stanvac pen oil rust remover 6030,500 ml/pac, hack saw blade [ high speed steel ] size 300 mm x 25 x 1 . 25 mm make miranda, molykote 1000 (1kg/tin), molykote 1000 spray can (400ml/270gms/can), puff seal have polyurethene based foam, sealing compound, araldite 180 gram/tube, #901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., stanvac red insulating varnish, locktite 406 20 ml for sealing compound make :-lock tight, electronic component cleaner - ultra safe electronic cleaner, molykote p.37, metal cutting wheel (for stainless steel) size 105 x 1.2 x 16 mm., grinding cutting wheel of size-100x3x16 mm,, grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., grinding disc (wheel) size 125 x 5 x 22-23 mm for grinder, h.s.s.hacksaw blade 18 tpi (300x12.5x0.63) make: mirinda., buffing wheel , size: 100 x 16 x 5/6 mm, holdtite liquid jointing compound (500 gms/pkg), grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, silastic 732 tube, stanvac / loctite 243 thread locker size : 50 ml., metal set putty, valve grinding compound (lapping compound), extra course, valve grinding compound course (lapping compound), carborandum universal make, (400 gms. packing), valve grinding compound fine (lapping compound), carborandum universal make, (400 gms. packing), emery cloth roll john pakey brand 50mtr(l) x 50, mm(w) and size in grid no 220., universal carborandum make emery cloth rolls having 50mtr. length *50mm width of following size grit 400 [extra fine] blue drill, teflon sheet size: 1'x1'x3 mm thick, ptfe teflon sheet 300x300x5 mm thick, bearing retainer, teflon sheet size: 1'x1'x1.5 mm thick, oil paper size 2' x 2' x 1 mm thk, foam seal sealer (dum dum), cutting wheel size : 125 x 3 x 22/23 mm, long rang rechargeable torch with charger., boiler suit (apron), kathi technical specification:-

Central Government/Public Sector

CTN :40025676

01 May, 2025 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : supply of 9900301655 vindhyachal procurement of spares or consumables - vindhyachal procurement of spares or consumables - m5121526930 - cone bush 91350801002 00 118 bhel gen , m5121526931 - cone bush 9135080100200119 bhel gen , m5121526952 - cone bush 91350801002 00 120 bhel gen , m5121526933 - spacer block 91350801002 00 121 bhel gen , m5121526934 - spacer block 91350801002 00 122 bhel gen , m5121517074 - o- ring 91350801002 123 bhel thdf 115 59 , m5121526935 - filling strip 91350801002 00 127 bhel , m5121526936 - thrd pin 9135080100200128 bhel gen 500mw , m5121526937 - glue 91350801002 00 130 bhel gen 500mw , m5121016713 - curing agent z 91350801002 00 132 bhel , m5121526938 - araldite 91350801002 00 134 bhel gen , m5121526939 - hardener 91350801002 00 135 bhel gen , m5121526940 - araldite 91350801002 00 138 bhel gen , m5121526941 - hr hv998 91350801002 00 139 bhel gen , m5121526942 - ins.enamel lck indct 91350801002 00 140 , m5121526953 - contact grease 91350801002 00 141 bhel , m4321503324 - silicon paste 01350801035sh3 142 bhel , m5121526954 - becktol varnish 91350801002 00 146 bhel , m5121526955 - epoxy resin cy205 91350801002 00 147 b , m5121526956 - calcite 91350801002 00 148 bhel , m5121526957 - powder.aerocil 380 91350801002 00 149 , m5121526958 - chr oxide grn 91350801002 00 150 bhel , m5121526959 - hardner hy840 91350801002 00 151 bhel , m5121526960 - chalk powder 91350801002 00 152 bhel gen , m5121526961 - epoxy lam.fab.sheet 91350801002 00 153 , m5121526962 - adhsiv pattex 91350801002 00 154 bhel , m5121526963 - loctite 222 01350801035 00 143 bhel gen , m5021256138 - fine mica glass tape 1350801003var 00 90 , m5121526964 - conductive varnish 91350701000 00 56 , m5121526965 - semi conducting varn 913507010000059 , m5121526966 - grph powder 91350701000 00 60 bhel gen , m5121526967 - resin e8702 9135070100000 61 bhel , m5121526969 - curing agent z 9135070100000 62 bhel , m5121526970 - insulating tape 9135070100000 67 bhel , m5121526971 - slot wrapper 9135070100000 68 bhel , m5121526972 - cr cotton tape emtmisc00 46 bhel , m5021266247 - toluene industrial tgemis1 00 402 bhel , m5121016658 - resin cy-205 bhel generator-500 mw , m5121526973 - orthoxylene emtmisc00 71 bhel , m5021500081 - wtrprf adhesive tape emtmisc00 67 bhel , m5121526974 - poly adhesive tape tgemis00 930 bhel , m5121526975 - barrier cream emtmisc00 410 bhel , m4121041016 - water emery paper bhel thri 108 44 , m5121526920 - trichloroethylene emtmisc00 127 bhel , m5121526976 - cap emtmisc00 138 bhel , m5021026128 - methyl ethyl ketone emtmisc var-00 , m5121036120 - araldite cy 205 turbo generator , m5021266114 - hardener hy840 tgemis 1 0076 bhel , m5021026080 - micaflakes micanite stator core repair , m5021266045 - enamel red ie-82 tgemis1 00 341 bhel , m5121517027 - insulation cover 91350801002 76 bhel , m5121517029 - end plate 91350801002 78 bhel , m5121517008 - spacer 91350801002 57 bhel , m5121517030 - side plate 91350801002 79 bhel , m5121517031 - middle plate 91350801002 80 bhel , m5121517043 - locking shoe 91350801002 92 bhel , m5121016714 - generator assy 91350801002 131 bhel , m5121517062 - bolt 91350801002 111 bhel thdf 115 59 , m5021266106 - ep bid details/ 2 / 73 lam sheet tgemis 1 00 499 bhel 210mw , m5121016715 - fine mica powder 91350801002 133 , m5121526968 - glass tape 91350701 20 0 08 20 bhel , m5121516978 - packing strip 91350801002 27 bhel , m5121516979 - spacer 91350801002 28 bhel thdf 115 59 , m5121516980 - packing strip 91350801002 29 bhel , m5121516981 - packing strip 91350801002 30 bhel , m5121516982 - packing strip 91350801002 31 bhel , m5121516983 - top ripple spring 91350801002 32 bhel , m5121516984 - wedge 91350801002 33 bhel thdf 115 59 , m5121516985 - end wedge 91350801002 34 bhel , m5121516987 - slot ripple spring 91350801002 36 bhel , m5121516986n - slot ripple spring bhel , m5121026443 - tension disc 9135080100200110 bhel , m5121517068 - washer 91350801002 117 bhel thdf 115 59 , m8228490036 - poltester r

Central Government And Public Sector

CTN :40119127

26 Apr, 2025 NA

Dehradune - Uttarakhand

Tender For electric cabling service - 3 phase heavy duty electric wiring xlpe insulated working voltage form 415 v to 11 kv as per is 1554 along with associated items and civil work as per schedule of work attached; copper and aluminium coth conductor material as per schedule of work-1 supply, laying and testing cable xlpe insulated ,screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sq mm 3 1/2 core. rm 280 2 excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, or for shafts, wells, cesspits, manholes, pier holes, etc. and not exceeding 10 sqm on plan and getting out in soft /loose soil complete all as specified and as directed cum 60.75 3 returning filling including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and as directed. cum 60.22 4 removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. cum 0.53 5 supply and laying ldpe pipes 50 mm dia with all fitting ,laid in ground for crossing the cables across the road by cutting existing road , under floor ,wall by cutting existing floor and making good the road /floor and wall surface after laying of pipe . rm 270 6 cement concrete 1:3:6 type c-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete for making foundation for mounting flood light /bollard light fitting/finishing of roads/floors etc . cum 4.05 7 m &l for cutting of road /floor surface 30cm girth, up 45 cm width for croosing the pipe line /laying of cable acroos the road all as specified and directed. rm 30 8 s & f distribution boards epoxy powder coated tp & n (vtpn mccb db) 8 way ,415 volts ,fabricated from minimum 1.6 mm thick crca sheet and fixed/ flush to wall and suitable for universal mounting with 250 amps fully insulated copper bus bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for ip-43 db,s protection, suitable for fixing fp mccb 100/125 amps as incomer complete all as specified and directed. note: suitable mccb and outgoing mcbs will be measured separately under relevant items of this schedule each 1 9 s & f mccb ,4 pole 100 a , 415 volts with rupturing capacity 16 ka with thermal-magnetic release and adjustable overload setting of following capacity complete all as directed. each 1 10 s & f bus bar chamber with 4 nos copper busbar 150 amps including mccb 100a 16ka 415 volts each 1 11 s & f sub main wiring with 4x16 sqmm +1 x 10 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 50 12 s & f sub main wiring with 2x4 sqmm +1 x 4 sqmm run pvc insulated unsheathed frlsh cable 1100 volt grade, with multi stranded copper conductor drawing in concealed pvc conduit not less than 25mm dia complete all as specified and directed. rm 200 13 s & f modular rectangular block for mounting,modular switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175mm x 175 mm and 50 mm deep each 25 14 supply and fix modular switch 1 way 16a, 1 module with indicator lamp each 25 15 supply and fix modular socket 6a/16a, 2/3 pin combined 2 module each 25 16 material and labour for earthing with galvanised steel earth plate electrode 60cmx60cmx 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 32 x 6 gi strip by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to

Epoxy Coating Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors