Latest epoxy thinner Tenders | Government epoxy thinner Tenders

CTN :38965454

07 Feb, 2025 NA

Bangalore - Karnataka

Tender For supply of southgaard epoxy white primer 1 is to 1 to dtd 5567a sfpl pc- ea21z01 , southgaard epoxy hardener to dtd 5567a sfpl pc-ha35z270 , southgaard epoxy thinner to dtd 5567a sfpl pc- st30z288 , southane pu day glow orange glossy 1 is to 1 to dtd 5580a sfpl pc- ua08s01 , southane pu grey ral-7046 glossy with hardener to dtd 5580a , southane pu golden yellow glossy to dtd 5580a sfpl pc- ua05s60 , southane pu hardener to dtd 5580a product code- hl30z06 , southane pu thinner to dtd 5580a sfpl pc- st30z251 , southgaard epoxy chromate free primer- filler def tan 80-216-1 4 is to 1 product code- ea27z14 , southgaard epoxy hardener to def stan 80-216-1 , southgaard epoxy thinner def stan 80- 216-1 product code- st30z215

State Government

CTN :38970753

17 Feb, 2025 12.88 Lacs

East Nimar - Madhya Pradesh

Tender For work contract forcoal tar epoxy paint coating of condenser tube sheet and water box at unit 4,2x660 mw,sstpp,mppgcl,dongalia.

Central Government/Public Sector

CTN :38874108

18 Jan, 2025 7.96 Lacs

Sundergarh - Odisha

Tender For supply of electrical workshop consumable items glass texolite sheet epoxy resin bonded laminated synthetic resin bonded laminated sheets fabric base type - f , synthetic resin bonded laminated sheets fabric base type

Central Government/Public Sector

CTN :38878105

30 Jan, 2025 NA

Dhubri - Assam

Tender For provision of power supply at proposed isolation bay near 05 and 23 end of runway at rupsi airport-1 supplying of following size of 1.1kv grade multistrand aluminium conductor xlpe insulated pvc sheathed armoured power cable (as per is: 7098:1988 with upto date amendments) complete as required. (i) 3.5 core, 300 sqmm. meter 200 (ii) 3.5 core, 95 sqmm. meter 1800 2 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (i) above 185 sq. mm and upto 400 sq. mm meter 146 (ii) above 35 sq. mm and upto 95 sq. mm meter 1755 3 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal/ hdpe pipe as required. (i) above 185 sq. mm and upto 400 sq. mm meter 24 (ii) above 35 sq. mm and upto 95 sq. mm meter 45 4 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required: (i) above 185 sq. mm and upto 400 sq. mm meter 30 5 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required: (i) 3 x 95 sq. mm (45mm) set 2 (ii) 3 x 400 sq. mm (82mm) set 2 6 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930. part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. od 200 mm dia meter 69 design, manufacturing, supply, installation, testing & commissioning of cubicle type totally enclosed double, door, free standing, dust free, damp of vermin proof and water proof outdoor (ip 55) feeder pillar with canopy, fabricated out of 2mm thick crca sheet, epoxy paintained with provision of 3mm gland plate for incoming &, outgoing cables including supply & fixing the following items and interconnections, wiring with suitable size, wires/cables and including all civil works like excavation, pcc, brick work pedestal, plastering, refilling etc. and, as per specifications as required. incomer: 250a 4p 36ka tm mccb with ol/sc protection-2 nos, (i) spreader-2 nos, (ii) extended rotary handle- 2 nos, (iii) 230v uv coil-2 nos, (iv) 1co aux +tac- 2 nos, (v) indicating lamp on , off, trip 230v ac - 6 nos, (vi) phase indicating lamp r , y, b , 230v ac- 6 nos, (vii) 6a , mcb ,sp 10ka- 2 nos, (viii) 250/5, 15va, cl-1, c.t - 6 nos, (ix) 1ph digital volmeter , 230v ac - 2 nos, (x) voltmeter selector switch- 6 nos, (xi) 1ph digital ammeter , 230v ac -2 nos, (xii) ammeter selector switch- 2 nos, (xiii) 2no+2nc auxiliary contactor 220v ac- 2 nos, buscoupler:, 250a 4p 36ka tm mccb with ol/sc protection - 1 no, (i) spreader-1 no, (ii) extended rotary handle- 1 no, (iii) 230v uv coil-1 no, (iv) 1co aux +tac- 1 no, set 1, (v) indicating lamp on , off, trip 230v ac - 3 nos, (vi) 2no+2nc auxiliary contactor 220v ac- 3 nos, outgoing:, 160a 4p 36ka tm mccb with ol/sc protection( active + standby) - 2 nos, (i) spreader-2 nos, (ii) extended rotary handle- 2 nos, outgoing:, 63a 4p 36ka tm mccb with ol/sc protection- 2 nos, (i) extended rotary handle- 2 nos, outgoing:, 32a 4p 36ka tm mccb with ol/sc protection- 1 no, (i) extended rotary handle- 1 no, others:, 3pin plug & socket- 1 no, 8 design, manufacturing, supply, installation, testing & commissioning of cubicle type totally enclosed double door, free standing, dust free, damp of vermin proof and water proof outdoor (ip 55) feeder pillar with canopy fabricated out of 2mm thick crca sheet, epoxy paintained with provision of 3mm gland plate for incoming & outgoing cables including supp

State Government

CTN :38869319

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :38869323

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digital

Central Government/Public Sector

CTN :38877360

30 Jan, 2025 3.31 Lacs

Kanpur - Uttar Pradesh

Tender For supply of fed-std-595/35045 mil-prf-85285ety-1 cl h flat blue{ in 1 gallon (3.78 ltr) kit} , fed-std-595/37925 mil-prf- 85285ety-1 cl h white paint{ in 1 gallon (3.78 ltr) can} , fed-std-595/33538 mil-prf-85285ety-1 cl h flat yellow{ in 1 gallon (3.78 ltr) can} , mil-t-81772b ty i epoxy thinner{ in 1 gallon (3.78 ltr) can}

CTN :38893817

30 Jan, 2025 25.00 Lacs

Gurgaon - Haryana

Tender For tender for supply of misc items - plywood commercial 8ft x 4ft x 6mm , plywood commercial 8ft x 4ft x 6mm , aluminium sliding door bolt 250mm , ptmt ball cock with epoxy coated rod 15mm , ss tower bolt 150mm bolt 10mm dia , cable pvc sheathed with copper conductor multi strand single core size 10 sq mm 90 rm in a roll , cable pvc sheathed with copper conductor multi strand single core size 6 sq mm 90 rm in a roll , change over switch on load in sheet metal enclosure 415 volts with side handle opration 100 amps 4 pole , change over switch on load in sheet metal enclosure 415 volts with side handle opration 200 amps 4 pole , change over switch on load in sheet metal enclosure 415 volts with side handle opration 400 amps 4 pole , change over switch on load in sheet metal enclosure 415 volts with side handle opration 63 amps 4 pole , copper cable single core 1.0 sqmm 90 rm in a roll , decorative wall light fixture 15 w led , fan regulator , fan regulator modular type , flexible wire 23 or 76 roll of 90 mtr , flexible wire 40 or 76 roll of 90 mtr , led fitting 30 watt security light , led fitting 45 watt security light , mcb db spn 12 way , plug and socket boards enclosure with 3 pole or earth plug and socket with mcb tp 20 amps , plug and socket boards spn enclosure with two pole or earth plug and socket with mcb sp 20 amps , power connector type ml i 16 amp , socket flush p type 6 pin 15 or 16 amp modular , socket flush p type 6 pin 6 or 16 amp modular , strainght through cable joint kit suitable for 1100 v cable epoxy type of size 95 sqmm 3.5 core , strainght through cable joint kit suitable for 1100 v cable epoxy type of size 120 to 150 sqmm 3.5 core , strainght through cable joint kit suitable for 1100 v cable epoxy type of size 120 to 185 sqmm 3.0 core , strainght through cable joint kit suitable for 1100 v cable epoxy type of size 185 to 240 sqmm 3.5 core , strainght through cable joint kit suitable for 1100 v cable epoxy type of size 50 sqmm 3.5 core , strainght through cable joint kit suitable for 1100 v cable epoxy type of size 70 sqmm 3.5 core , strainght through cable joint kit suitable for 11000 v cable heat shrink type of size 95 to 240 sqmm 3.0 core , , end termination cable joint kit suitable for 11000 v cable heat shrink type of size 70 to 95 sqmm 3.0 core , , street light 25 watt led , switch board boxes twelve modules , switch board boxes two modules , switch one way 15 or 16 amps modular , switch one way 5 or 6 amps modular , socket one way 15 or 16 amps modular , socket one way 5 or 6 amps modular

CTN :38783154

22 Jan, 2025 NA

Sonitpur - Assam

Tender For supply of plastic pipe 2 point 5 inch , bulk head fitting model no lhkl01160099 of havells or equivalent make bajaj or philips with cfl 08 watt , sunshed , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled with 2 nos holes for 6 mm dia near one side , tower bolt , bow handle , al drop , ceiling rose three terminal snow white make anchor or ssk or cona , pvc round oblique squire block make polycab or supreme or finolex , fire extinguisher of one kilogram capacity dry power type conforming to is 13849 along with its accessories make cease fire or omex or alfa fire , connection pipe , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long make jindal or tata or kalinga , mcb box 63 amp make havells or standard or l and t , door hinge , stopper , plywood 8ft x 4ft x 12mm termite resistant and bwr cofirming to is 1328 1996 make supreme or green ply or kit ply , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe make jindal or tata or kalinga , synthetic paint enamelled red confirming to is 5 2004 make berger or asian or nerolac , plywood 6ft x 4ft x 12mm termite resistant and bwr cofirming to is 1328 1996 make supreme or green ply or kit ply , ppgi roofing sheet 10ft x 3ft long and thickness 0 point 63 mm with grard film the ppgi sheet shall have minium coating of 4 to 5 micron epoxy primer as per ts

State Government

CTN :38297187

20 Jan, 2025 11.97 Lacs

Ukai - Gujarat

Tender For corrigendum : supply of consumable, tool tackles and measuring material at 500mw unit-6 gsecl, ukai tps.(et-5842 bmd-6) - teflon tape : size 1/2" width x 12mtr long, rust removing spray wd-40 in aersole packing of high pressure valves., oil stop leak putty 114 gms. pack, adhesive hylomer universal blue [100 gms/pkg/nos], rustolene 500 ml/tin, holdtite liquid jointing compound (500 gms/pkg), steel measuring tap 3 m long, bearing retainer, emery cloth roll coarse size 50 mm x 50 meter x 400 grit, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets)., red oxide, molykote 1000 (1kg/tin), digital outside micrometer with large digital display. size : 0 - 25mm, resolution: 0.0001 mm., molykote 1000 spray can (400ml/270gms/can), ss shims thickness = 0.02 mm, ss shims thickness = 0.05 mm, ss shims thickness = 0.03 mm, ss shims thickness = 0.08 mm, ss shims thickness = 0.15 mm, ss shims thickness = 0.20 mm, ss shims thickness = 0.30 mm, ss shims thickness = 0.40 mm, ss shims thickness = 1.00 mm, wire brush with wooden handle size 50x150x300 mm, grinding cutting wheel of size-100x3x16 mm,, oil gasket sheet of standard size (2mm thick) - champion make - style -59, motorised chain pulley block, capacity : 05 ton, chain pulley block cap-2 ton light weight, cmh lead wire size 1.0mm, flash back arrestor for regulator mounted da cylinder., flash back arrestor for regulator mounted oxygen cylinder., gas cutting torch cutogen esab make, gas cutting nozzles (1/32"), cutting nozzle size 1/16", cutting nozzle size 3/64", hydraulic jack with pump & accesories capacity: 50 mt., hydraulic jack cap:10 ton, sodium silicate, pipe wrench, length -450 mm, least max opening-60 mm, britelite 2000 meters long rang torch rechargeable led flashlight with charger., tap set size: dia 12 mm x 1.75 mm pitch, tap set size: dia 14 mm x 2.00 mm pitch, tap set size: dia 16 mm x 2.00 mm pitch, tap set size: dia 18 mm x 2.50 mm pitch, hss ground thread hand tap set m 20x2.5, tap set size: dia 22 mm x 2.50 mm pitch, tap set size: dia 24 mm x 3.00 mm pitch, hydraulic bottle/screw jack capacity : 10 ton, lift height : 350 mm, lifting stroke (mm) min : 110 mm, actuation : hydraulic, emery cloth roll 50mm w x 50 mtr grit 220 extra fine, hand operated ratchet lever hoist capacity 3 mt

Epoxy Thinner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government