Tender For corrigendum : supply of one coach set of underframe details (cross member assy, stiffeners etc) for train set mc,ndtc and tc coaches to drg nos. 1) 72711024, alt. "b" - 2 nos, 2) 72711025, alt. "b" - 2 nos, 3) 72711026, alt 'c '- 2 nos, 4) 72711027, alt 'c' - 2 nos, 5) 72711028 - 2 nos, 6) 72711029 - 2 nos, 7) 72711015, alt 'a'- 12 nos, 8) 72711016, alt 'a'- 12 nos, 9) 72711030 - 2 nos, 10) 72711031 - 2 nos, 11) 72711033, alt 'a' - 2 nos. 12) 72711034, alt 'a' - 2 nos. 13) 72711037 - 2 nos, 14) 72711038 - 2 nos, 15) 72711039, alt 'a' - 2 nos, 16) 72711040, alt 'a' - 2 nos, 17) 72711041, alt 'a' - 2 nos, 18) 72711042 - 2 nos, 19) 72711077 - 4 nos, 20) 72711078 - 4 nos, 21) aae11764 - 4 nos, 22) aae11192 - 4 nos, 23) aae11102 - 2 nos, 24) aad11946 - 4 nos, 25) aad11945 - 4 nos, 26) aad11944, alt-'a' 4 nos, 27) aad11955, alt 'a' - 2 nos, 28) aad11526, alt 'b' - 20 nos, 29) 72711035, alt 'a' - 2 nos, 30) 72711036, alt 'a' - 2 nos, 31) aad11701 alt 'b' - 2 nos, 32) aae11101 alt 'a' - 4 nos, 33) aad11951, alt-'b' - 2 nos, 34) aad11950, alt-'b' - 2 nos, 35) aad11964 - 4 nos, special condition : finished components except ss components shall be thoroughly cleaned and latest to a dft of minimum 60 microns and mdts-094, rev-01 with amnd-01 or (latest) shall be applied with epoxyzincphosphateprimer as per rdso/spec no.m&c/pcn/100 followed. for procedure and colour shade excluding the areas as specified in detail drawings. all the items are to be supplied as coach set only. suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [ warranty period: 30 months after the date of delivery ]
Tender For supply of one coach set of console finish machined for train sets (ver.2) to drg. nos.aae11687- 2 nos & aae11688- 2 nos special condition : - specially marked as for train set coaches. finished components shall be thoroughly cleaned and applied with epoxyzincphosphateprimer as per rdso/spec no.m&c/pcn/100 latest to a dft of minimum 60 microns and mdts-094 latest shall be followed. for procedure and colour shade excluding the areas as specified in detail drawings. item to be packed in polythen bags and in suitablesize wooden pallet. 1)all polythene bags shall be of min. 200 microns thick , sealed water tight in all sides. 2)each polythene cover must have identification label with list of items inside. 3)each wooden box shall be stenciled or rigidly nailed with identification label [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of one coach set of underframe details (cross member assy, stiffeners etc) for train set mc,ndtc and tc coaches to drg nos. 1) 72711024, alt. "b" - 2 nos, 2) 72711025, alt. "b" - 2 nos, 3) 72711026, alt 'c '- 2 nos, 4) 72711027, alt 'c' - 2 nos, 5) 72711028 - 2 nos, 6) 72711029 - 2 nos, 7) 72711015, alt 'a'- 12 nos, 8) 72711016, alt 'a'- 12 nos, 9) 72711030 - 2 nos, 10) 72711031 - 2 nos, 11) 72711033, alt 'a' - 2 nos. 12) 72711034, alt 'a' - 2 nos. 13) 72711037 - 2 nos, 14) 72711038 - 2 nos, 15) 72711039, alt 'a' - 2 nos, 16) 72711040, alt 'a' - 2 nos, 17) 72711041, alt 'a' - 2 nos, 18) 72711042 - 2 nos, 19) 72711077 - 4 nos, 20) 72711078 - 4 nos, 21) aae11764 - 4 nos, 22) aae11192 - 4 nos, 23) aae11102 - 2 nos, 24) aad11946 - 4 nos, 25) aad11945 - 4 nos, 26) aad11944, alt-'a' 4 nos, 27) aad11955, alt 'a' - 2 nos, 28) aad11526, alt 'b' - 20 nos, 29) 72711035, alt 'a' - 2 nos, 30) 72711036, alt 'a' - 2 nos, 31) aad11701 alt 'b' - 2 nos, 32) aae11101 alt 'a' - 4 nos, 33) aad11951, alt-'b' - 2 nos, 34) aad11950, alt-'b' - 2 nos, 35) aad11964 - 4 nos, special condition : finished components except ss components shall be thoroughly cleaned and latest to a dft of minimum 60 microns and mdts-094, rev-01 with amnd-01 or (latest) shall be applied with epoxyzincphosphateprimer as per rdso/spec no.m&c/pcn/100 followed. for procedure and colour shade excluding the areas as specified in detail drawings. all the items are to be supplied as coach set only. suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of filter oil part no xkbh01965 , filter fuel part no xkbh02138 , fuel filter part no 11qg70110 , element pre fuel filter part no 11lb20310 , element a by c outer part no 11q820130 , element a by c inner part no 11q820120 , element filter pilot part no 3un600110 , element drain filter part no 3un600090 , element return part no 31rf10400 , belt fan part no xkbh03315 , belt fan part no xkbh01869 , drier assy receiver part no 11n690140 , hose discharge part no 11n896111 , hose b liquid part no 11n890050 , condenser assypart no 11em90050 , evap core assy part no 11n690790
Tender For corrigendum : supply of ac spare parts c c - butane gas canister 225 gram , hydrocarbon gas canister , cappillary tube size 0.031 inch x 100 feet per roll , cappillary tube size 0.036 inch x100 feet per roll , capillary tube size 0.055 inch x 100 feet per roll , cappillary tube size 0.064 inch x100 feet per roll , brass flair nut size 1 by 4 inch , brass flair nut size 1 by 2 inch , brass flair nut size 3 by 8 inch , brass flair nut size 5 by 8 inch , brass dead nut size 1 by 2 inch , brass dead nut size 1 by 4 inch , brass dead nut size 3 by 8 inch , brass dead nut size 5 by 8 inch , copper tube coil per roll size 1 by 4 inch x0.6mm thk x50 feet , copper tube coil per roll size 3 by 8 inch x 0.7 mm thk x 50 feet , copper pipe coil per roll size 1 by 2 inch x 0.8 mm thkx 50 feet , copper tube coil per roll size 5 by 8 inch x0.8 mm thk x 50 feet , portable torch for butane gas canister , tube cutter , danfoss liquid line filter drier-1 by 2 inches, model no dcl 164 023z500 , flairing and swaging tool set with box , charging line heavy duty , valve for chargine line 1 by 4 inch with 500 psi pressure gauge , liquid line drier dm-50-1 by 4 inch , copper filter for ac , copper filter for fridge , angle valve , insulation foam pipe , black foam insulation pipe , foam insulation pipe , refrigerant gas charging pin valve , copper to aluminium brazing rod , copper to m.s. brazing rod , aluminium to aluminium brazing rod , nitrile insulation sheet roll , window ac front grill , 2- way l-type brass valve for split ac, size 1 by 4 inch , 2-way l-type brass valve for split ac, size 3 by 8 inch , 2-way l-type brass valve for split ac, size 5 by 8 inch , 2-way l-type 1 by 2 inch brass service valve , rubber groomat for ac cpmressors , rubber groomat with clamp for fan motor , rubber groomat with clamp for dee freezer fan motor , 2- pieces clamp for fan motors , pvc flexible braided hose pipe , rubber groomat for ac cpmressors, size 70x57mm , heavy duty pvc braided hose pipe with nozzle spray gun , ref gas 3-way manifold with pressure gauges and charging lines , copper tube
Tender For supply of pu painting kit for apricoat yellow and blood red pu paints consists of seven items. 1:-heat reflective & thermal barrier full gloss pu enamel beige finish ( two pack ) colour shade ral-0708040 to chapter-v of rdso spec. m&c/pcn/100/2018, qty.44 ltrs. 2:- heat reflective & thermal barrier full gloss pu enamel maroon finish ( two pack ) colour shade ral-0303045 to chapter-v of rdso spec. m&c/pcn/100/2018, qty.10 ltrs. 3:-thermal barrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2018, qty.34 ltrs. 4:-thinner compatible heat reflective & thermal barrier full gloss pu enamel to chapter-v of rdso spec. m&c/pcn/100/2018, qty.30 ltrs. 5:-epoxy based putty colour white ( two pack ) to chapter-iii of rdso spec. m&c/pcn/100/2018, qty.10 kgs. 6:- epoxyzincphosphateprimer ( two pack ) to chapter-ii of rdso spec. m&c/pcn/100/2018, qty.02 ltrs. 7:- epoxy thinner compatible to thermal barrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2018, qty.30 ltrs.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ]
Tender For supply of pu painting kit for apricoat yellow and blood red pu paints consists of seven items. 1:-heat reflective & thermal barrier full gloss pu enamel beige finish ( two pack ) colour shade ral-0708040 to chapter-v of rdso spec. m&c pcn/100/2024, qty.44 ltrs. 2:- heat reflective & thermal barrier full gloss pu enamel maroon finish ( two pack ) colour shade ral-0303045 to chapter-v of rdso spec. m&c/pcn/100/2024, qty.10 ltrs. 3:-thermal barrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2024, qty.34 ltrs. 4:-thinner compatible heat reflective & thermal barrier full gloss pu enamel to chapter-v of rdso spec. m&c/pcn/100/2024, qty.30 ltrs. 5:-epoxy based putty colour white ( two pack ) to chapter-iii of rdso spec. m&c pcn/100/2024, qty.10 kgs. 6:- epoxyzincphosphateprimer ( two pack ) to chapter-ii of rdso spec. m&c pcn/100/2024, qty.02 ltrs. 7:- epoxy thinner compatible to thermal barrier high build epoxy ( two pack ) to chapter-iv of rdso spec. m&c/pcn/100/2024, qty.30 ltrs [ warranty period: 12 months after the date of delivery ]
Tender For corrigendum : supply of solid core liquid line filter drier, connection in 1/2odf out 1/2 odf liquid capacity (kw/tons) r-22 (33/9.4) drying capacity (kg/ lb) (22/48.4), mwp 610 psig/42 bar temperature range - 40 to + 70 degree centigrade, similar to part no.023z5032 type dcl 164s (1/2solder) of danfoss conforming to rdso specification no. rdso/pe/spec/0061-2005 (rev-1) or latest suitable for lhb/sg rmpus. accepable make danfoss/alco/spolon or any other make with prior approval of rdso. [ warranty period: 30 months after the date of delivery ]