Latest evaporative cooling pads Tenders | Government evaporative cooling pads Tenders

CTN :45377133

29 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of wiper blade with arm front , door lock rear , wiper blade with arm rear , cooling fan 1 and 2 , fuse 5 oblique10 amp , brake light bulb , tail light bulb , fuel injector , spider brg propeller shaft , pressure plate , accelerator paddle with sensor

CTN :45384476

11 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45384495

06 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For mech dept lab items dept use - 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps no 90000 timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45382257

03 Jun, 2026 NA

Hisar - Haryana

Tender For auction for unserviceable articles micro wave oven , servo stabilizer 5 k.v.a vs05 , , gc-3 genei cooler 24 x 0.5 ml tube , flash gel system sr.no. 107573 with flash gel camera , pcr machine (sr no. 482-1513) with 1 k.va uos (sr no. es1101208110) with 9 batteries , autoclave vertical 300 x 500mm li-13 (sr.no. 43110) with automatic pressure control switch and accessories , spin win 6 plate rotor , mini submarine eletrophoresis with casting tray, comb set (15 x 10cm) , electrophoresis vertical mega gel 50 cm (wx) with accessories , referigereator , li control , ph meter , ph meter , elico make , ph meter digital eutech , tutor d two pen type , ph meter , distillation unit ysu-410a, yorco make , laminar air flow (yorco) dm-188-hl-62 (6'x2'x2) with accessories , weighing balance labex fuji digital up to 3.kg model no li-303 g , weighing balance and/ek-400i, 400gxo.1g , rotary mixer rotospin (tarson) , model no. 3090 , 3091 50x1.5 ml , autoclave vertical ysi 402d 300x500mm , water bath liquid cooling microprocessor , controlled l1-133 , 500x 250x250mm , micro centrifuge with rotors non refrigerated , remi/rm-12cdx , angle head (30x.4ml) , rm1241, rm1242 (24x1.5ml), 1261(8x2ml) , refrigerated centrifuge , no.c-24bl , rotors , a) angle head c-244a (8x15ml) , b) angle head r-247 , (8x50ml) , spectrophotometer (uv visible) digital 200-1000nm , transluminator 25x25 md-25 wealtech , uv lamp held 300nm,230v/50hz , platform rocker 11 platform electronic timer genei make no. 107107 , genei digital p5500 power supply with timer constant with current constant voltage digital display (genei no 1061817)

CTN :45057581

04 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45358061

18 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of various items of lab equipments for govt. p g college guna district guna (m.p.) under p m usha pariyojna 4th call - supply of various lab equipments items for govt. p g college guna district guna (m.p.) 4th call, waterand soil testing analysis kit (digital) : range ph 0 to 14.00 resolution ph 0.01 accuracy ph 0.01 1 digit temp. comp. 0 to 100 deg. c., water bath (06holes) : 6 hole8 ltrs., waterbath(12holes) :12 hole 20 ltrs., water distillation apparatus(single distillation unit 2 litre/hour) : single distillation 5 litres, analytical balance : least cosunt 0.0002g, analytical weight box : 1-100g, fractional weight box : 1-500mg, physical balance : 250gm accuracy 0.1g, digital balance : least count 1mg, single pandigital balance : 0.1mg 200g, digital photoelectric colorimeter : 8 filter,1 ml, digital potentiometer : with hot plate and electrodes, digital conductometer : with cell 1cc and 0.1cc, d.o. meter : polarographic do range: typically 0 to 90 mg/l (milligrams per liter) or 0 to 600% saturation.rdo (optical) do range: usually 0 to 50 mg/l or 0 to 500% saturation., digital naphelo/turbidity meter : digital turbidity cum nephelometer range:-, 200,1000 ntu/jtu resolution:- 0.01 ntu/jtu accuracy:- 3% fs, 1digit display:- 3 digit 7-segment led light source:- ir led detector:- photodiode sample system:- 60 x 25mm clear glass test tubes power:- 230 v 10% ac, 50 hz accessories:- test tube set of 2, operation manual, dust cover, polarimeter half shade : the specific rotation ( ) is a physical property defined as the optical rotation at a path length of 1 dm, a concentration of 10 g/l, a temperature (usually 20 c), and a light wavelength (usually sodium d line at 589.3 nm), melting point apparatus :melting-point measurement range: room temperature - 400 c setting rate of the starting temp. : 50 c~400 c 5 min; 400 c~50 c 7 min minimum digital display: 0.1 c size of the capillary: 1.4mm (outside diameter) 1.0mm (inside diameter), 90mm equipped with color camera and color monitor to observe melting point with ease validation program for standard samples 8 operator names can be storedgraphic lcd display to display all test parameters & test instructions, digital melting point apparatus :melting point measurement range : ambient to 300 deg c starting melting point temperature : settable from 50 to 300 deg c heating time : 3 minutes (up to 300deg c) cooling time : 5 minutes (from 300 deg c) accuracy : +/ 0.5 deg up to 200 +/ 0.8 deg from 200 to 300 temperature display resolution : 0.1 deg c rate of heating (deg c per minute), abbe refractometer : safety bs en 60950-1:11/2006 emc en 55024 : 10/2003 en 55020 : 11/2005, tlc kit : outstanding standardization and quality control exceptional adherence, hardness and surface homogeneity. analyzing samples with high matrix- load without sample preparation. multiple samples analyzed in parallel.highly cost-efficient, fast and economical, centrifuge : 6000rpm, corkboring machine :adjustable guide that permits holes to be bored in any part of a stopper, the knurled chuck - 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. the steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments,, distillation apparatus : single distillation 5 litres, oven hot air : 14" 14" 14 , voltage stabilizer : 2kv, vertex shaker : 6 tube capacity, mixer small : moter capacity 900 watt, water bath(cu) : 4 , heating mantle with energy regulator : 500 w,2litre, single crucible heater : helical wire coil moldatherm insulation platinel ii thermocouple with 10tm compensated lead wire and polarized plug ceramic fiber hearthplate programmable heat-up to setpoint temperature indicates setpoint and process temperatures temperature: 1200 c (2192 f) maximum crucible sizes: 5 (top vestibule id) x 8 (heated depth), water bath rectangularsingle walled : 6 hole 8 ltrs., water bath rectangular :2 hole, kjeldahl distillation unit : unit of 3 tests, microwave oven : 30 ltr co

CTN :45363431

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 4 ) for mechanical department - purchase of equipments, slip gauge set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatness / parallelism: 0.5 mstored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes, dc motor type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 poleconstruction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly , bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm,0.8mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :44652695

06 Jun, 2026 105

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of cartridge group , bushing , cap , shrink ring , floating bush , socket screw , counter - sunk screw , cover with gasket ring , bearing complete te , end-disc , floating bush , socket screw , bearing casing complete , bearing casing , cap , hex - headed screw , locking plate , oil inlet flange complete , screw plug , gasket , locking washer , gas inlet casing , key , socket screw , nozzle ring , cover ring , gasket , hex - headed screw , locking washer , hex - headed screw , locking washer , hex - headed screw , hex - headed screw , locking washer , set of core hole cover , gasket , flange oval , hex - headed screw , core hole cover without gasket blind , core hole cover machined , gasket , blind flange , hex - headed screw , core hole cover without gasket , gasket , flange oval , hex - headed screw , baffle plate , hex - headed screw , locking plate , core hole cover without gasket for cooling water outlet , core hole cover for cooling water outlet , gasket , flange oval , hex - headed screw , core hole cover without gasket blind , core hole cover machined , gasket , blind flange , hex - headed screw , gasket , gasket , foot , turbine blade , ring nut

CTN :45359599

09 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of relay valve assembly service kit , pressure line hose pipes set , pressure boot assembly repair kit , pressure boot seals , the above mentioned engine pressure system over , bs iii radiator assembly , inter cooler repair , coolant plastic dat mtd single cap , radiator hose pipe , the above mentioned engine cooling system over hauling , bs iii break booster assembly , break adjuster yoke assembly , break master cylinder repair kit , the above mentioned break booster repair remove the all , clutch master cylinder assembly , the above mentioned clutch and gear over hauling repair , chain bracket assembly , chain bracket socket bearing , chain bracket cuts rubber , wheel bearing , the above mentioned mc over hauling repairs removes , head gasket kit , gear shifter and assembly , gear shifter and assembly lh rh , gear lever knob , gear lever without bu , gear lever plate , the above mentioned gear box remove and check the , shock absorber assembly , the above mentioned shock absorber remove and check , kilometer head assembly , the above mentioned kilometer head assembly remove

corporations/Associations/Others

CTN :45086510

02 Jun, 2026 13.22 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : supply of ribbon bolt with nut & washer , size- dia 24.0 mm , l 120 mmxhd-55x55x45 , ribbon bolt with nut & washer , size-dia 24 mm , l 150 mmxhd-55x55x45 , set plate small ss 310 code- 3051-15 , set plate small ss 310 code- 3051-17 , pivot pin for coal compartment assembly , l-103 mm , pivot pin for air compartment , pivot pin for coal compartment assembly , l-143 mm , end air compartment upper , end air compartment lower , stainless steel seal tube assembly , sealing air steel corrugated pipe assembly , flame scanner guide pipe assembly , steel corrugated pipe assembly for oil line , cooling air steel corrugated pipe assembly , steel corrugated pipe assembly for steam line , ignitor guide steel corrugated pipe assembly

Evaporative Cooling Pads Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others