Latest excavating service Tenders | Government excavating service Tenders

State Government

CTN :43220534

23 Dec, 2025 3.30 Lacs

Mandi - Himachal Pradesh

Tender For restoration of rain damages on various roads in kunnu section under padhar sub-division hppwd, padhar. (sh:- hiring of earth cutting/ excavating machine for removal of slips/ debris, dressing of berms, clearing of drain and catch pit etc. for opening of roads during winter season (i) sahal garlog road (ii) shingari babli chhahri road (iii) dhwapa sarounjh road (iv) banogi chehar chaila road (v) kunnu baridhar via gajoun road and other roads etc.)

CTN :43259198

30 Dec, 2025 1.70 Lacs

Rewari - Haryana

Tender For development of landscaping work of sub tehsil building for officials of revenue department at dahina (non-residential) in district rewari.1 provision for clearance of unwanted weeds excavating the earth. 2 provision for plantation of ornamental tree

CTN :43206566

29 Dec, 2025 NA

Ferozepur - Punjab

Tender For material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting

Central Government And Public Sector

CTN :43189134

27 Dec, 2025 36.72 Lacs

Ahmedabad - Gujarat

Tender For earth work excavation by mechanical means,excavating trenches of required width for pipes, cables, etc ,providing and laying in position cement concrete of specified grade excluding, reinforced cement concrete, etc. as mentioned in boq

CTN :43170139

24 Dec, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of provn of underground rcc bunker near cengo complex at af stn jammu : :-- excavating over areas , excavating over areas exc , material and labour pcc , returning filling in excavated , removing of excavated material soil , formwork to sides of concrete foundations , formwork to faces of walls retaining , supply and fixing tmt steel , material and labour for rcc , material and labour for rcc design , material and labour , formwork to soffits of suspended , formwork to edges of concrete flats , material and labour for mild steel , material and labour for two coat , material and labour for prepration , material and labour for prepration of newly

Central Government/Public Sector

CTN :43188296

31 Dec, 2025 13.65 Crore

Korba - Chhattisgarh

Tender For providing of handling ,transport and other mining services - percentage quote based - ob removal, hiring of hemm for excavating rehandling ob not requiring drilling loading into tippers transportation and unloading the excavated material at kusmunda area

CTN :43083074

26 Dec, 2025 5.63 Lacs

Pandavapura - Karnataka

Tender For excavating boundry trench for chokanahally tank, mutteger tank (dasana kere) hodagatta tank, hulikere koppalu tank & marachakanahally doddakere coming under no.35 hlbc sub division dudda.

Central Government / Public Sector

CTN :42976619

29 Dec, 2025 NA

East Godavari - Andhra Pradesh

Tender For supply of excavating conveyor belt[ frm] length is 19,500 mm , as per plasser part no:re20.725 make:plasser, dunlop, nirlon,mrf,mr,virshubh,biswas& jagriti,

Excavating Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector