Latest excavating Tenders | Government excavating Tenders

CTN :40521312

19 Jun, 2025 1.66 Lacs

Betul - Madhya Pradesh

Tender For supply of soil investigation - making 03 number of 150mm nominal dia bore hole , carrying out soil test , bulk density and moisture content test , triaxial shear test , bearing capacity of soil and suggested foundation test , recommended sbc should be given for , excavating comma laboratory tests and reporting with photographs , rl of the ground level oblique foundation level , photographic record of geo exploration , recommendation , swelling index and swelling pressure , recommendation for utilization of excavated soil for filling under floors

CTN :40522831

18 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of surface dressing n exc 15 cm deepin hard oblique dense soil , excavating over areas not exceeding 1 point 5 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 1 point 5 m deep not exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed. , returning filling in including spreading and levelling and watering and well ramming in layers not exceeding 25 cm each , removing excavated material n exc 50m and depositing where directed at a level n exc 1 point 5 m above the starting point , m and l for hard core of gauge n exc 63 mm and deposeted and spread and levelled in layers n exc 15 cm thick and watered and rammed to a true surface complete all as specified and as directed , m and l cement concrete in fdn and 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate in sub base of flooring complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 20 mm graded aggregate complete all as specified and as directed , m and l for rcc m30 reinforced cement concete design mix in foundation including rafts and footing and foundation beams and bases for column and etc basement slabs under reamed piles , m and l for mild steel tmt bar 10 mm dia and over cut to length and bent to shape required , m and l for mild steel tmt bar 8 mmn dia and overm cut to length and bent to shape required , m and l formwork to sides of rough finished flat surface of concrete foundations and footings and bases of colums and raft and raft beams and sides and sffits , m and l formwork to rough finished flat surface soffits of suspended slabs such as roof slabs and floor slabs and landing and similar work not exceeding 200mm thick horizontal or sloping all , m and l formwork to rough finished flat surface in sides and soffits of floor or roof beams and beam haunchings and girders and bressummers , formwork to faces of walls and retaining walls and butments and parapets and staircase railings and similar work including attached pillasters and buttresses , m and l formwork to edges of rough finished surfaces of concrete flats and trends and breaks in floors windows cills and concrete railing and openings in concrete walls and floor and roofs , m and l liquid water proofing compund , m and l for verified ceramic wall tiles light shade 10 mm thick square oblique rectangular polished and area of each tiles not exceeding zero point 36 sqm and in floors , m and l for verified ceramic non skid tiles light shade 10 mm thick square rectangular polished and area of each tiles not exceeding zero point 36 sqm , m and l for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed , m and l rendering 15 mm thick on wall on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick on ceiling on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick in on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed , m and l for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion , m and l for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed , s and f anodised aluminium window and ventilator shutters and side hung type without sash bars and al

CTN :40529462

23 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of excavating chain drive gear box for frm as per plasser part no.-wn83.80 sub re14.101 ,m ake-plasser, dana motion. [ warranty period: 30 months after the date of delivery ]

CTN :40501610

02 Jun, 2025 NA

Panipat - Haryana

Tender For supply and delivery of bought-out materials in connection with composite work for utilities offsites part b for panipat refinery expansion project of iocl panipat haryana-, supply of gl earthing strip along the cable trenchs or cable trey or fixing to walls or structure including welding at joint providing anti-corrosive paint orbitumen and jute covering for welding portion, clmping and necessary hardware for connecting, etc, as per approved drawings, specifications and directions of engineer-in-charge., , the amount of hot dip galvanizing shall be min 610 gm per sq mter, , 50 x 6 mm, , 25 x 3 mm, , 100 x 12 mm, , supply of gl earthing strip buried individually at a depth of 500mm including welding at joint, providing anti-corrosive paint or bitumen and jute covering for welding portion, clmping and necessary hardware for connecting, excavating and refilling etc, as per approved drawings, specifications and directions of engineer-in-charge. the amount of hot dip galvanizing shall be min 610 gm per sq mter, , 50 x 6 mm, , 25 x 3 mm, , 100 x 12 mm, , supply of gl earth plate as per std.7-51-0103, complete with anchor bolt, including, as per approved drawings, specifications and directions of engineer-in-charge. the amount of hot dip galvanizing shall be min 610 gm per sq mter, , gl earth plate as per std.7-51-0103 (dimension 400 x75x10mm having 10 dia holes for 8 mm dia bolt), , freight charge for 'door delivery at b and r's iocl panipat refinery project site [excluding gst]:

CTN :40383883

02 Jun, 2025 NA

Ernakulam - Kerala

Tender For providing of custom bid for services - excavating, crushing and loading of legacy gypsum at phase i yard fact (cd)

Central Government/Public Sector

CTN :40228818

02 Jun, 2025 17.20 Lacs

Bangalore - Karnataka

Tender For corrigendum : providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; hiring of hydraulic excavator for excavating ore, loading of gravel onto the tractor, waste disposal/reclamation at excavation s..

State Government

CTN :40343066

27 May, 2025 20.21 Lacs

Ahmedabad - Gujarat

Tender For special repair to government f-colony, shahalam, ahmedabad. (repairing and replacing of drainage line by excavating in small narrow space by manual/ machine, inspection chamber, manhole and other miscellaneous work for block no. 1, 2, 3, 4, 5, 6, 7, 8, 9, 31, 32, 29, 30 and other places)

State Government

CTN :40314465

27 May, 2025 7.43 Crore

Porbandar - Gujarat

Tender For increasing in capacity by excavating and deepning medhacreeck tidal regulator reservior at village miyani of porbandar taluka & district.phase -1 sub estimate-7(2 nd attempt)

State Government

CTN :40095274

03 Jun, 2025 NA

Birbhum - West Bengal

Tender For corrigendum : providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms

CTN :40242013

26 May, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of for pvc casing and capping confirming to is 3419 part 3 havells finolex,polycab, natural white or equivalent , switch socket combination snow white multipurpose 2 in 1, 15 amp 230 volts make-anchor,ssk, cona , switch socket combination snow white 5 amp 230 volts make-anchor, ssk, cona , service bracket 40mm dia gi tubing medium grade 1.5 mtr long make-jindal,tata,kalinga , service cable pvc insulated aluminium conductor, 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed as per store list attached , ceiling rose three terminal snow white make- anchor, ssk,cona , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts rechargeable type make-havells,bajaj, philips,cropmtion , pvc flexible wire copper conductor multi stranded 0.0016 oblique 76 make-havells, finolex, plaza , pvc flexible conduit pipe 15 mm dia havells,finolex,polycab, natural white or equivalent , pvc round oblique square block make-polycab,supreme, finolex , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side. , ci earth pit cover of size 300 x 300 x 6 mm with angle iron frame of size 20x20mm, 3 mm thick with ms frame. , funnel fitted with 20 mm diameter gi pipe 1.5 m long. pipe make-jindal,tata, kalinga , gi wire 4 mm diameter for earthing. , charcoal , salt normal , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal, tata, kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto,polycab, finolex , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make-birla gold,ambuja, ultratech,acc ,jk, dalmia , coarse sand free from vegetation qty - 0.30 cum , coarse aggregate 20mm graded qty - 0.30 cum , coarse aggregate 40mm graded qty - 0.30 cum superstructure of gun repair shed of size 20.00 m x 10.00 m x 5.00 m height for gun repair shed under job no 2519 as per technical specification and drgs attached, distribution box 8 way, double door spn 240 volts copper bus bar and neutral link earthing stud conforming to is-13032 and is- 8623 double door type make-havells,legrand,l and t, mcb spn 240 volts 32 amps make-havells, l and t standard, mcb sp 6 to 32 amps make-havells, l and t, standard, pvc tape 19mm wide 5 m long make-steelgrip,anchor,kinjal, cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor of size 1.5 sqmm single core as per store list attached, cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor of size 2.5 sqmm single core as per store list attached, pvc casing capping 1 inch long medium grade snow white havells,finolex,polycab, natural white or equivalent, pvc casing capping 3 oblique 4 inch long medium grade snow white havells,finolex,polycab, natural white or equivalent, switch piano 5 amp 230 volts flush type one way snow white havells,finolex,polycab, natural bid details/ 2 / 36

Excavating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government