Latest exhaust gas boiler Tenders | Government exhaust gas boiler Tenders

CTN :43512206

24 Jan, 2026 15.00 Lacs

Haldwani - Uttarakhand

Tender For boiler chimney with id fan almora dairy

State Government

CTN :43413412

22 Jan, 2026 7.65 Lacs

Korba - Chhattisgarh

Tender For round the year maint. work of boiler auxiliaries i.e. fan, esp, air heater and duct & damage of 2x210 mw, bhel boiler of unit no. 1 & 2, htps, korba west.

State Government

CTN :43388466

20 Jan, 2026 NA

Sikka - Gujarat

Tender For work of bird and trash trap screen replacement of suction hood assembly of pa fan and fd fan in boiler unit no. 3 & 4 at sikka tps. [one job means for one fan]

State Government

CTN :43388469

20 Jan, 2026 NA

Sikka - Gujarat

Tender For supply of rubber expansion bellow for fd fan lube oil system of boiler unit no. 3 & 4 at sikka tps

State Government

CTN :43085670

12 Jan, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of various size & types of rtds for 3x210 mw unit 3,4 & 5 at gandhinagar tps. - duplex rtd pt-100 as per gtps drg no ext-inst-00434 for unit no 3 and 4 id fd pa fan and motor and coal mill motor de nde bearing temperature measurement system., solid sintered tungustan carbide thermowell, length 325 mm, process conn. m 33 x 2 (m), inst conn. 1/2 inch bsp (f) for coal mill out let temperature as per drg. no.gtps/ext- imd-ii -00713, rtd duplex 3 wire pt-100 for coal mill outlet temp, od 6 mm,ss 316 sheath material insulation compact filled mgo insertion length 450 mm end connection 1/2 inch bsp head die cast aluminium ip 65.ext, pipe 150 mm., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 6 mm, sheath length: 60 mm., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 10 mm, sheath length: 300 mm straight., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 12 mm, sheath length: 100 mm straight, cable length: 15 meters., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 8 mm, sheath length: 25 mm., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 12 mm, sheath length: 250 mm straight, cable length: 20 meters., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 12 mm, sheath length: 250 mm straight, cable length: 10 meters., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 12 mm, sheath length: 350 mm straight, cable length: 10 meters., rtd, pt-100, duplex, 3 wire mineral insulated (compact mgo filled) without head (head less), sheath dia: 08 mm, sheath length: 250 mm straight, cable length: 10 meters., headless rtd(pt-100type) for f.d.fan of gtps unit no 5-d.e. /n.d.e. bearing temperature measurement,sheath dia. 8 mm, sheath length: 180 mm, process connection (male): dia:17.5mm thread:1.0 mm pitch 15 mm with adjustable sewage lock type., headless rtd (pt-100 type) for turbine,boiler and balance of plant services temp measurement,sheath dia. 5 mm, sheath length: 300 mm, process conn: -18 od x thread 1.0 mm pitch length 12mm with adj.sewage lock type, headless rtd (pt-100 type)for c/m o/l shaft low radial brg, warm shaft radial brg, o/l shaft brg temperature measurement, sheath dia.5.5 mm, sheath length: 432 mm,process connection:1/2 inch bsp (m) thread 14g with adj. sewage lock type, headless rtd for ce pump journal brg, cw pump thrust / general brg temp measurement, sheath dia.4.5mm,process onnection:1/2 inch bsp (m) with adjustable sewage lock type,sheath length:200 mm,, rtd pt-100 with thermowel element : is:2848,duplex /ungrounded t/w construction straight , material : solid tungusten carbide process conne: screwed m 33 x 2, ss316 t/w insertion lenth ( l1) 325 mm t/w od :22 mm, rtd (pt-100 type) for coal mill of gtps unit no 5-upper radial bearing temperature measurement, and dimension and material of construction as per drg. no: gtps / ext / c and i / 00775., head with plug and socket type temperature element pt-100 rtd for bearing temperature of high speed shaft coupling side, insertion length 170 mm., head with plug and socket type temperature element pt-100 rtd for lower bearing temperature of low speed shaft, range: 0-100 dec c, insertion length 290 mm., head with plug and socket type temperature element pt-100 rtd for lower bearing temperature of medium speed shaft, range: 0-100 dec c, insertion length 365 mm., head with plug and socket type temperature element pt-100 rtd for upper bearing temperature of medium speed shaft, range: 0-100 dec c, insertion length 700 mm., head with plug and socket type temperature element pt-100 rtd for upper bearing temperature of low speed shaft, range: 0-100 dec c, insertion length

State Government

CTN :42786814

13 Jan, 2026 39.26 Lacs

Ukai - Gujarat

Tender For corrigendum : repairing of flue gas & air ducts and fabrication & erection of fan silencer, economizer & aph hopper during aoh/coh and on an as and when required basis in boiler unit nos.3,4&5 at gsecl ukai tps (wt-5055 bmd-ii).

Central Government/Public Sector

CTN :43343281

16 Jan, 2026 16.38 Lacs

Delhi - Delhi

Tender For providing of custom bid for services - annual maintenance contract for water dispenser & electrical appliances - comprehensive repair/maintenance of water dispenser and electric appliances/equipments (table fan/wall fan/pedestal fan/heat-convector/rod heater/oil radiators/led tube-lights/call bells/remote bells/table lamp/extension board/geyser/water-boiler/hot-case/engagement-light/covering of wires with pvc channel etc.) in ministry of home affairs, new delhi for its offices located at kartavya bhawan, ndcc-ii, major dhyan chand national stadium jaishalmer house, sardar patel bhawan, as well as residential offices of hon'ble ministers.

State Government

CTN :43310832

17 Jan, 2026 61.01 Lacs

Kamrup - Assam

Tender For supply and installation of medium fish feed mill machineries in hojai district under ridf xxvi - bucket elevator with accessoriesms body (min 5 m ht) powered by 1 hp motor connected to a tank hoper (no 1) (size 1250*1250*1600 mm thickness 2 mm) above with iron stagging (min 3.50 m ht) for storage of raw materials upto 300 kg capacity., pulverizer machine/ crusher/ grinder machine with accessoriespulverizer machine/crusher machine (no 1) ms body powered by 15 hp motor with 200-250 kg per hour crushing capacity with cyclone provision., siever machine with accessoriessiever machine: siever machine/vibro separator run by 3hp with screw conveyor (no 1) run by 1 hp motor carrying finely sieved powder to mixture machine inlet and another screw conveyor (no 2) run by 1 hp motor carrying coarse powder turn to fine powder by a finer pulverizer machine (no 2) run by 15 hp motor to mixture machine inlet., bucket elevator with accessoriesbucket elevator (no 2) for mixture machine made of ms body (min 5.40 mt ht) powered by 2hp motor lifting pulverizer material to mixture machine via a hoper., tank/hoper for mixture with accessoriestank/hoper for mixture (tank no 2) made of 2mm thick plate of size 1250*1250*1500 mm fixed above an iron stagging (min 3.3 m ht) for feeding into mixture machine., feed mixture(horizontal/vertical) machine with accessoriesfeed mixture (horizontal/vertical) machine attached with reducing gear box mixer machine powered by 2 hp motor of min size 1200*600*800 mm., elevator for extruder machine with accessorieselevator for extruder machine: bucket elevator (no3) made of ms body (min 6 m ht) powered by 2 hp motor lifting mixed material to a tank for feeding into extruder machine., tank/hoper with accessories for feeding extruder pellete machinetank/ hopper for extruder : (no-3) made of 2mm thick plate of size 1250 x 1250 x 1500 fixed above an iron staging ( min 3.3m ht.) for feeding into mixture machine., extruder pellete machine with accessories to produce floating pelletsextrude pellet machine: powered by 45 hp motor with twin screw for producing floating pellets with 200kg per hour production capacity., steam boiler with accessoriesboiler of appropriate capacity with necessary blower pipe line for boiler ( internal/ external), air conveyor (no.1) made of ms body ( min 6 m ht.) run by 3hp motor for sending pellet to counter flow cooler fan ( cooler cum dryer) run by 5 hp motor over a iron staging of min 2.5m ht, then to 4 layer grader cooler ( size 1.5 x 1 x 1 m) run by 1hp motor for drying & cooling towards the inlet of air conveyor (no. 2) in flavoring section, blower pipe line for boiler(external) with accessoriesboiler of appropriate capacity with necessary blower pipe line for boiler ( internal/ external), air conveyor (no.1) made of ms body ( min 6 m ht.) run by 3hp motor for sending pellet to counter flow cooler fan ( cooler cum dryer) run by 5 hp motor over a iron staging of min 2.5m ht, then to 4 layer grader cooler ( size 1.5 x 1 x 1 m) run by 1hp motor for drying & cooling towards the inlet of air conveyor (no. 2) in flavoring section, coller cum dryer with accessoriesboiler of appropriate capacity with necessary blower pipe line for boiler ( internal/ external), air conveyor (no.1) made of ms body ( min 6 m ht.) run by 3hp motor for sending pellet to counter flow cooler fan ( cooler cum dryer) run by 5 hp motor over a iron staging of min 2.5m ht, then to 4 layer grader cooler ( size 1.5 x 1 x 1 m) run by 1hp motor for drying & cooling towards the inlet of air conveyor (no. 2) in flavoring section, blower pipe line(internal) with accessoriesboiler of appropriate capacity with necessary blower pipe line for boiler ( internal/ external), air conveyor (no.1) made of ms body ( min 6 m ht.) run by 3hp motor for sending pellet to counter flow cooler fan ( cooler cum dryer) run by 5 hp motor over a iron staging of min 2.5m ht, then to 4 layer grader cooler ( size 1.5 x 1 x 1 m) run by 1hp motor for dr

CTN :43231991

12 Jan, 2026 NA

Durgapur - West Bengal

Tender For thermal insulation in different areas of boiler and auxiliaries, esp, ducting, ms line, crh line, hrh line and id fan area of unit 7 dpps during overhauling period.

CTN :43111417

12 Jan, 2026 NA

Bokaro - Jharkhand

Tender For supply of impeller with shaft assembly for pa fan of cpp boiler rh,impeller with shaft assembly for pa fan of cpp boiler rh,impeller with shaft assembly for pa fan of cpp boiler lh,impeller with shaft assembly for pa fan of cpp boiler lh

Exhaust Gas Boiler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector

State Government