Get complete information related to latest Expantion Joints Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Expantion Joints Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Expantion Joints Tenders.
Tender For supply of items : 00010 - m0545107121, specification, ring,packing, material : pure grahite, cross section : rectangular cross section, thickness : 10mm, height : 15 mm, dimension(od x id) : 120 x 100x15 mm, pressure seal ring(odxidxht)-120x100x15mm (rectangular cross, section), pure graphite compressed & moulded pressure sealing ring, (for density 1.8-2 gms/cc) reinforced with ss wire mesh to, withstand temperature 600 c and pressure 300 kg/cm2, carbon content: more than 90%, 00020 - m0510200455, specification, gasket,ring joint, type : pressure seal ring, material : graphite, pressure designation : cl 2500, dimension (od x id x thk) : 145x125x18.5 mm, size : 125 nb, 00030 - m0510051604, specification, "gasket,ring joint, material :grafseal, temperature range :600 deg.c, pressure designation :200 bar, dimension (od x id x thk) :90 x 80 x 10 mm, material:flexible compressed pressure seal ring,with stainless steel, reinforced,density:1.8 gm/cc,angular shape:60 deg,height at id:1.3 mm", 00040 - m0510200477, specification, gasket,ring joint, type : pressure seal ring, material : graphite, pressure designation : cl 3000, dimension (od x id x thk) : 120x100x18.5 mm, size : 80 nb, 00050 - m0510200650, specification, ring,seal, type : pressure seal ring, material : graphseal, material spec : pure graphite, dimension (od x id x thk) : 85 x 95 x 10 mm, temperature range : 600 deg c, cross section : angular shape:60 deg,height at id:1.3 mm, additional information : 250 kg/sq cm, material:flexible compressed pressure seal ring,with stainless steel, reinforced,density:1.8 gm/cc, 00060 - m0540353370, specification, ", gland,packing, material :flexible pure graphite, size :115 x 101 x 14 mm, pressure working :250 ksc, temperature limit :550 deg.c, stainless steel wire reinforced,density:1.8 gm/cc,cross section:angular", 00070 - m0594060109, specification, soft iron serrated gaskets for lrsb puppet valve. size: 60 x 48 x 4 mm. material aisi:304, 00080 - m0520995067, specification, gasket,spiral wound, material,winding : stainless steel 316l strip, material,filler : pure flexible graphite, material,centring ring : carbon steel, pressure designation : 200 ksc, temperature range : 550 deg.c, thickness,gasket : 5 mm, thickness,centring ring : 5 mm, dimension (od x id x thk) : 129 x 95 x 79 x 5 mm, without inner ring,outer ring cs made, 00090 - m0511170139, specification, ", ring,packing, type :self sealing ring, material :graphite, temperature range :600 deg.c, pressure designation :250 kg/sqcm, thickness :21 mm, dimension(od x id) :170 x 136 mm", 00100 - m0510200468, specification, gasket,ring joint, type : pressure seal ring, material : graphite, pressure designation : cl 2850, dimension (od x id x thk) : 465x417x43 mm, size : 500 nb-
Tender For corrigendum : procurement of tie rod drag link and repair kits - drag link kit, drag link assembly, tie rod assembly, shifter yoke, link rod, tie rod arm rh tata midi, tie rod ball joint assy rh, tie rod ball joint assy lh, tie rod assy midi tata, tie rod end rh leyland midi, tie rod end lh leyland midi, eicher service kit for bushing, ball joint.., ball joint, shifting lever 1512 bsiv, assy ball joint lh 1512 bsiv, assy ball joint rh 1512 bsiv, assy ball joint rh bsiii, assy ball joint lh bsiii, drag link assy midi tata, track rod end assy rh bs iii, track rod end assy lh bs iii, tie rod end kit bs iii, track rod repair kit major, filler cap urea lockable, ball end rh eicher, assy track rod midi ll, drag link assy midi ll, ball joint assy rh midi, ball joint assy rh midi tata, ball joint assy lh midi tata, assy ball joint-tie rod end lh-257433800102, assy ball joint rh-tie rod end rh-257433800101, assy ball joint, drag link assembly tc, repair kit tie rod, kit threaded end rh, kit threaded end lh, tie rod assy, repair kit drag link, assy drag link front, steering arm top-5107, steering arm rh-5106, steering arm lh-5104, sub assy ball & socket jt small, drag link assy rane, drag link kit, drag link assembly, tie rod assembly, shifter yoke, link rod, tie rod arm rh tata midi, tie rod ball joint assy rh, tie rod ball joint assy lh, tie rod assy midi tata, tie rod end rh leyland midi, tie rod end lh leyland midi, eicher service kit for bushing, ball joint.., ball joint, shifting lever 1512 bsiv, assy ball joint lh 1512 bsiv, assy ball joint rh 1512 bsiv, assy ball joint rh bsiii, assy ball joint lh bsiii, drag link assy midi tata, track rod end assy rh bs iii, track rod end assy lh bs iii, tie rod end kit bs iii, track rod repair kit major, filler cap urea lockable, ball end rh eicher, assy track rod midi ll, drag link assy midi ll, ball joint assy rh midi, ball joint assy rh midi tata, ball joint assy lh midi tata, assy ball joint-tie rod end lh-257433800102, assy ball joint rh-tie rod end rh-257433800101, assy ball joint, drag link assembly tc, repair kit tie rod, kit threaded end rh, kit threaded end lh, tie rod assy, repair kit drag link, assy drag link front, steering arm top-5107, steering arm rh-5106, steering arm lh-5104, sub assy ball & socket jt small, drag link assy rane
Tender For procurement of various materials for the development different works of under nrega scheme in chandapur gp limit phase 04 - add handling , loading and unloading at 2% on material chandapur, casurina poles 100 - 150 mm chandapur, silver oak or equivalent planks 38 mm thick chandapur, jungle wood runners and planks chandapur, hom of vibrator 0.71 days chandapur, binding wire chandapur, tmt bars fe 500 chandapur, add watering charges at 1 % on material chandapur, mixer (concrete) - 1 cum capacity chandapur, display board chandapur 01, air compressor (1 hour initial + 1 hour final chandapur, water tanker 6 kl capacity chandapur, concrete jiont cutting machine for initial and final cuts chandapur, plate vibrator chandapur, screed vibrator chandapur, needle vibrator chandapur, concrete mixer 0.4/0.28 cum capacity chandapur, joint filler board 20mm thick as per is chandapur, plasticizer / super plasticizer chandapur, de-bonding strips 3.75 m (length) x 10 mm (width) x 5mm (thick) cut-out of rubber filler board or similar material including 5% wastage chandapur, bituminous sealant 800 ml per joint 23 joints chandapur, bitumen primer 200 ml per joint for 23 joints chandapur, polythene sheet 125 mm micron chandapur, broken granite metal 10 mm 0, broken granite metal 20 mm 0, broken stone aggregate 40 mm size chandapur, coarse sand (zone iii) chandapur, portland cement chandapur, form work 1% chandapur, crushed stone chippings 13.2 mm chandapur, granite metal 20 mm chandapur, granite metal 40 mm chandapur, crushed stone course aggregate 53 chandapur, vibratory roller 8 tonne 00, water tanker chandapur, motor grader 3.35 meter blade chandapur, gravel 2.36 mm/murrum chandapur, water chandapur 01, tractor - 40 hp chandapur
Tender For supply and construction of uwe - conductor , supply and fixing for flameproof point wiring for one socket point controlled by one switch with 2.5 sqmm , supply and fixing for flameproof point wiring for one light point controlled by one switch with 1.5 sqmm pvc insulated , supply and fixing switch flame proof rotary type with termination box in lm 6 to 16 amp , supply and fixing socket plug and rotatory switch flame proof rotary type with termination box in lm 6 to16 amp , supply and fixing led light fitting 2x20 watt flame proof , supply and fixing led flood light fitting 150 watt flame proof , m and l for flame proof aviation obstruction light beacon with flasher complete all as directed. , m and l for flame proof intrinsically safe electronic hooter of voltage 230 volts ac complete all as directed. , earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick buried directly in ground , supply and fixing wiring for circuit or submain wiring in steel conduit , supply and fixing flame proof mcb db spn 230v 6 way horizontal double door , supply and fixing flame proof metal socket 3ph and neutral link 63 amp complete with rotatory plug and switch all as directed. , supply and fixing flame proof mcb db tpn 230v 12 way horizontal double door , supply and fix single pointed air termination copper rod 12 mm dia 300 mm long complete all as directed. , supply and fix copper strip 32 mm x 6 mm burried in ground complete all as directed. , test point terminal block made of gun metal or phosphorous bronge of size 75 x75 x 25 mm , m and l for flame proof wall mounted fan industrial type of size 36 inch 230 volts , m and l for flame proof exhaust fan industrial type of size 450mm 230 volts , m and l for chemical earthing complete with copper plate of size 90cmx60cmx5.0mm thick electrode , supply and installation of liquld cool silent diesel engine driven generating set 415 volts 3 phase 4 wire of capacity 125 kva , cement opc 43 grade packed in hdpe bag each 50 kg wt , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , hardcore 63 to 90mm , aac blocks 600x200x150 , mild steel bars of size 10mm dia , three phase 1.2 hp monoblock pump 430 volt complete as per atc , individual standalone plastic body smoke alarm with adequate provision , individual standalone plastic body heat alarm , fire extinguisher of min 20 kg wt dry powder type , pvc water sintex tank 5000 ltr cap three layers complete all as specified and as directed. , ppr pipe 50mm dia complete all as specified and as directed. , stone dust , coarse aggregate 40 mm graded , stone boulder 8 inch used in 300mm soling , bituminous joint filling compound grade b , bituminous joint filler baord 20mm thick , polythene film 150 micron thickness , recron , thermoplastic road marking paint , water based acrylic paint , wooden planks for shuttering 2nd class wood of size 3.0 x 0.30 x 0.026m , road delineator , design consultancy qr incl iit vetting , labour charge
Tender For repair and renovation of office rooms and corridor - providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 percentage and conforming to is 15622 , of approved brand & manufacturer , in all colours and shade , laid on 20 mm thick cement mortar 1 4 (1 cement 4 coarse sand) jointing with grey cement slurry 3.3 kg/sqm. the tiles must be cut with the zero chipping diamond cutter only . laying of tiles will be done with the notch trowel , plier , wedge , clips of required thickness , levelling system and rubber mallet for placing the tiles gently and easily. (i) glazed vitrified floor tiles polished finish of size of tile 600 x 600 mm , grouting the joints of flooring tiles having joint using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg) , including filling / grouting and finishing complete as per direction of engineer-in-charge. (i)size of tile 600x600 mm , finishing walls with premium acrylic smooth interior paint with silicone additives of required shade , with water thinnable cement primer on wall surface having voc content less than 50 grams/litre , taking out existing wooden door shutter , repair by cutting , painting etc. and re-fixing of repaired door shutters to existing door frames , including replacement of hinges with screws , etc. as required , all complete as per the direction of the engineer-in-charge. , dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (i) for thickness of tiles above 25 mm and up to 40 mm , marble polish (stone polish) (lumpsum)