Latest extension lead Tenders | Government extension lead Tenders

Central Government And Public Sector

CTN :39130329

10 May, 2025 45.35 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : tender for supply of spares for bhel make ht switchgear - close unit assy , 35211001919-v00 , bhel , tripping block assy , 35211001918-v00 , bhel , limit switch , bhel , vcb , tripping spring for 6.6kv bhel , closing spring , 35213030702-v00 , bhel , vcb , top pole head , bhel , vm36 , bottom pole head , 15211001511-003 , bhel , vacuum interrupter , wl35964w , bhel , vcb , motor , vcb , spring charging , 220vac , 11kv , closing coil , 25211001563-009 , bhel , vcb , support insulator , 15211001515-012 , bhel , support insulator , 15211001515-002 , bhel , lever , 25211001510-001 , bhel , vcb , drive link , 25211001513-001 , bhel , vcb , d-lever assy , 25211001508-001 , bhel , vcb , centering ring , 45211001538-002 , bhel , vcb , spherical rod end , 35211001568-001 , bhel , spacer tube , 45211001715-001 , bhel , vcb , support rod , 25211001571-001 , bhel , vcb , compression spring , 35211001561-001 , bhel , auxiliary switch , bhel , vcb , emer tripping assy , 35212001889-v00 , bhel , plug and socket assy , bhel , vcb , slow closing handle , 35212001553-003 , bhel , spring charg hdle , 35211001509-v00 , bhel , bearing pin , bhel , vcb , 11kv , roller , 45211001622-001 , bhel , vcb , dashpot assy , 35211001720-00 , bhel , vcb , clip , 25211001588-001 , bhel , vcb , vm-12 , clip , pin , 25211001588-002 , bhel , vcb , vm-12 , clip , pin , 25211001588-003 , bhel , vcb , vm-12 , clip , 25211001588-004 , bhel , vcb , vm-12 , clip , 25211001588-005 , bhel , vcb , vm-12 , set of clip , bhel , vcb , 11kv , on-off indicator , 25211001578-001 , bhel , truck wheel , 35212001837-001 , bhel , vcb , roller , bhel , vcb , 11kv , shutter lifting , bolt , 35212001880-001 , bhel , vcb , set of pin , bhel , vcb , 11kv , push button , 45211001599-00 , bhel , vcb , damping rubber pad , bhel , vm36 , operating rod , bhel , vcb , vm12 , swing bolt , bhel , vcb , 11kv , rack in orout handle , 25212001515-v00 , vcb , lead screw assy , bhel , vcb , barrier , 35211001541-01 , bhel , vcb , vm-12 , pvc shroud , 35212001603 , bhel , vm12 , pin split , bhel , vcb , 11kv , plunger , 35211001846-001 , bhel , castle lock assy , 35211001930-v00 , bhel , packer cu , 45211001700001 , bhel , shroud , 15212001530-001 , bhel , vcb , vm-12 , poly shroud w ortopcut , bhel , vm12 , door gasket , 45215001674-001 , bhel , vcb , window glass , 45215002002-001 , bhel , vcb , fixed contact set , bhel , cb , 11kv , contact set w orsob , bhel , cb , 11kv , contact set w orsob , bhel , cb , 11kv , fixed contact set , bhel , vacuum cb , 11kv , seal off bushing , 15215001559-00 , bhel , vcb , inter panel b or b , 35215002059-001 , bhel , vcb , shutter assy , 35215001834-v01 , bhel , vcb , limit switch , bhel , vcb , tripping lever orknob , 45219001530-001 , bhel , cleat , bhel , vm-12 , insulating screw , 45215001658-003 , bhel , packer(round) , 45096901507-001 , bhel , al spacer(round) , 45096301554-001 , bhel , support insulator , 15211001515-003 , bhel , sprt channel , 35216601652-001 , bhel , busbar scrw-spl , 45095001554-001 , bhel , shim , 45096601525-001 , bhel , stud , 45216901510-001 , steel , bhel , clamp plate , 35096901504-001 , bhel , packer , 45216901509-001 , bhel , link plate , 45216301533-003 , bhel , barrier , 35215001773-003 , bhel , sealing cover , 35215001774-004 , bhel , busbar joint shroud , 25215001810-v00 , bhel , sprt ch rnd packer , 45096901506-001 , bhel , earthing connection , 35216602174-003 , bhel , slv l orf 0.4x240 , bp2251082069 , pvc , bhel , slv l orf 0.4x128 , bp2251082050 , pvc , bhel , slv l orf 0.4x104 , bp2251082069 , pvc , bhel , sleeve , dia-38 , pvc , bhel , space heaters 75w , bp7049073557 , bhel , bolt hex am12x75-8.8 , aa7111122224 , bhel , bolt hex a m12x65-8. , aa7111124014 , bhel , nut hex a m12-8 , aa7151115040 , bhel , washer spg-12-st , aa7164002070 , bhel , washer mcd13-st , aa7161001072 , bhel , scru hex a m8x30-8.8 , aa7121123134 , bhel , washer spg-8-st , aa7164002053 , bhel , washer mcd 8.4-st , aa7161001056 , bh

CTN :40187457

21 May, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of dozer - 125fl92676 fuel filter spin on , 11z8200268 starter motor , cfb2711045 bolt for u joint , cfw0111030 washer spring , cew0342603 connecting lead , 110co02414 acc cable , nk oil pressure gauge pipe , ccp0421200 fuel tank cap with lock , chh30 04114 cut hose steering , chh30 23210 cut hose hyd tank , chh30 04720 cut hose hyd , ccc01 06015 clamp cut hose , 31z 8100096 turbo charger assy , 116ph 91655 hose hyd tank

CTN :40170647

20 May, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - cotter pin(price list sl-324) , cotter pin(sl-326) , collar(sl-21) , gasket , rod snap (price list sl-40) , roll pin(sl-23) , gasket (pl sl-440) , nut , starter lock rod(page-07) , rod throttle stop arm , pin , cotter pin (ms sl-400) , screw driver , o ring , screw driver , universal pinion(sl-22) , snap rod , rod joint , bushing , pliers , spark plug champion ql 16v(1)(2) , starter lock lever , ring spnr 9.53x11.11mm (3/8 inch x7/16 inch) , seal ring(30hp-m-page-03) , seal , gasket , prop nut(sl-181) , ring spnr 9.53 start 11.11 , piston pin(price list sl-478) , pad , tubing , o ring (p-19) , nut , spark plug , tool kit bag , bolt d ring to cover(ms sl-36) , rope , box spnr 21x23mm , tool bag empty , spark plug(ngk-b7hs-10)(sl-464) , spark plug indian , pr comb plier (ces sl no 208) , screen (fuel pump sl-16) , tube box spnr 10x132mm , sparking plug (india) , seal , o ring , conector- fuel tank , starter handle(price list sl-539) , gasket (30) , cover , scissors flat 250 mm , clamp , gasket , powerhead base(ppl sl-728) , seal impeller(price list sl-697) , stop leaf , lever -shift interlock , screw bracker to plate(ces sl no 213) , plug l 78v , grommet throttle cable(obm 30hp(j) p 4) , float valve & seat assy(price list sl-1060) , cover leads , connector , throttle cable to lower motor cover(sl- , lanyard stop switch(sl-612) , gasket for gear oil plug , gasket lower side mount(ms sl-247) , pin (shift handle kit 25-35hp)(sl-345) , jet bowl vent , protector spark plug lead , safety chain(ces sl no 210) , spring starter , tool kit for obm 30hp (p) , tool kit set for obm 30 hp yamaha , inlet needle seat and gasket (ms cat sl-126) , nut , needle valve , gauge oil lever , seal steering handle , spanner plug , carburetor repair kit (containing 11 nos items) , spacer , fuel connector - engine end , dowel pin , connector assembly - fuel , thrust bushing propeller (ms ser no 135) , spark plug (ms cat sl-52) , oil seal , tool kit set for obm 35 hp (j) , ring set standard , shift rod low , gasket , float guage , spark plug lead assy , grommet control shaft(obm(j) 30hp p-4 sl no14) , bypass cover(p-15) , piston (standard)(ctlg sl no 14) , lever and pin assy throttle , seal , hose and primer bulb assy , impeller water pump , starter solenoid , gear case filter , timing belt , rod thrust and retrainer , charger coil , cam and shaft (exhaust , fuel line assy(sl-462) , fuel line assembly , stop switch kit , guide pin assy , rod assy connecting , propeller (10 in. pitch)(sl-500) , tank assembly fuel (plactic-6.6 gallon) , fuel pump assy (ms-40) , gasket set , tiller handle (black) , craddle piston , stator , ignition coil(ctlg sl-17) , driveshaft (xx-long) , thermomelt stik 52 c , carburetor , propeller assy(obm 30 hp parsun plate no-8) , thermomelt stik 73 c , recoil starter assy (pl sl-536) , holder s-17 , lever and shaft lock(price list sl-965) , pump assy prime , propeller (13 in.pitch-std)(sl-498) , propeller s.s (8 in pitch) , handle and shaft assy latch(p-4) , propeller( 8 in pitch) , transon plate (ces sl no 211) , sleeve prop , starter pulley and pin assy (ms sl-22) , universal puller set , cylinder head , power head gasket set (13 nos items)(sl-434) , manifold intake , ring locating , propeller , sp chakeres 15c , propeller shaft(sl-483) , tester s-34 , gear & bushing assy fwd , motor cover 30 hp , timing light/ignition , ignition analyzor , top cowl (black) , c.d unit , motor cover assy , spring winder , carburetor assy(obm 30hp(j) p10) , carburator assy , drive shaft , engine cover assy , carburator assy , crankshaft assembly , carburator assy , rewind starter assy , electric starter kit , wrench-bevel gear b nut , cd volt meter cd-77 , pinion braring remover/installer kit , gear case (1)(3) (ms sl no 125) , gear case assy , engine cover assy

Central Government/Public Sector

CTN :39999760

09 May, 2025 NA

Haridwar - Uttarakhand

Tender For corrigendum : supply of stte electrical and mechanical - 1). "tool for fuse regulator box as per p/n.457680023" 2). " tool for encoder regulation as per p/n.457610035" 3). "extension lead for sw mfcb as per p/n.187673013" 4). "extension lead for sw smf as p er p/n.se7036" 5). "siac command equipment as per p/n.436333010" 6). "dummy round, proximity fuse te sting as per p/n 137697515" 7). "vulcano ber dummy round (inert ammunition fitted with vulcan o ber electronic as per p/n 15 7697026" 8). "vulcano glr dummy round rf civ ilian gps (inert ammunition fi tted with vulcano glr electron ic as per p/n 157697027" 9). "3ap dummy fuze as per p/n 4754 60011" 10). "adapter for 4ap dummy fuze as per p/n 136201100" 11). "tool to test stabilized transm itter platform as per p/n 4363 10010" 12). "dummy cartridge as per p/n 137697461" 13). "solenoid test benchas per p/n 437618017/02" 14). "cpu brushless test equipmentas per p/n 116921001" 15). "motor driver test bench el./tr . gearboxes as per p/n 1129200 21" 16). "dummy da scivolata (dummy for sliding test) as per p/n 437602012/04" 17). sae as per p/n 457610029 18). "ac3 console pcb bench as per p /n 457610040" 19). "talyvel electronic gauge level las per p/n 137697151" 20). "motor pump assembly test bench as per p/n 427618010/10" 21). "fcs simulatoras per p/n 45 7620039" 22). "switch/sniffer 8 doors + sniff er as per p/n.100010779" 23). "vulcano ammunition reader as per p/n 4374401011" 24). "4ap fuze ammunition reader as per p/n 475844001" 25). "4ap dummy fuze as per p/n 4758 10014" 26). "optical unit to detect the bli nd arc of the ship as per p/n 157697435" 27). "pc laptop equipped with all sw tools necessary for the integration / debug of any failure as per p/n 457680336" 28). "on board spare parts and tools for 76 sr mf strales configur ationas per list provided by m /s lds vide email dated 29 jul y 2022"

CTN :40105816

28 Apr, 2025 NA

Vellore - Tamil Nadu

Tender For supply of hardware items -11 - anabond bearing retainer 412(50 ml), ananond thread locker -112 (50 ml), hand hacksaw blade size: 1/2" x 12" make: miranda, steel wire brush 6 rows with wooden handle, teflon tape 1" width, presicion blue tube(10 gram), m seal (100 gram), rustolene(500 ml), safety goggles white color, painting brush 3", painting brush 4", 1/8" rubber joint white color, red lead powder, white lead powder, araldite aw 106 in with hardner material: epoxy resin package container epoxy resin =1 kg hardner hv 953in =800 gram

CTN :40085824

29 Apr, 2025 9.01 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/02 - deepnagar to rail way station rest part,length of road - 500 mclearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, km stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 200 m stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 600 mm equilateral & triangle - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, 600 mm circular - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc), providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on

CTN :39886159

29 Apr, 2025 NA

Gwalior - Madhya Pradesh

Tender For corrigendum : supply of calcium hypochlorite granules (65 - 70 %) (v2) (q2) , teakwood plank of size 7 feet long, 9 inch width and 1.5 inch thick , hylam sheet 4 inch x 8 inch , hylam sheet 8 inch x 8 inch , bracket clamp for street light , ac enclosure box , d joint 200 mm , d joint 150 mm , d joint 100 mm , d joint 300 mm , d joint 80 mm , d joint 250 mm , lead pig , spun yarn , cotton waste sutli , gland pocking 8 mm , gland pocking 10 mm , cp spray jet for wc , ptmt float valve 20 mm , brass spindle for bib cock , pvc internal fitting for flushing cistern of capacity 10 litre , ss wire mesh roll of size 50 feet x 4 feet , plywood commercial 8 feet x 4 feet x 18mm thick , plywood one side teak face 8 feet x 4 feet x 12mm thick , plywood commercial 6 feet x 3 feet x 12mm thick , plywood commercial 8 feet x 4 feet x 12mm thick

CTN :40091630

02 May, 2025 22.24 Lacs

Jind - Haryana

Tender For supply of electrical spares - thermal overload relay lnt 6 to 10 a , thermal overload relay lnt 2.5 to 4 a , thermal overload relay lnt 4 to 6.5 a , fn 63 a sfu lnt , sfu 125a lnt , earthing wire 6mm , earthing wire 10mm , earthing wire 4mm , cable tie 200mm packet , earthing strip gi 25x3mm , sfu 200a lnt , cable tray 18 gauge 2inch , capacitor 15kvar , capacitor 20kvar , capacitor 50kvar , hrc kit kat lnt 32a , hrc kit kat lnt 63a , cable connector 10mm , cable connector 25mm , cable connector 35mm , cable connector 50mm , hrc fuse hbc type 10a , hrc fuse hbc type 16a , hrc fuse hbc type 20a , hrc fuse hbc type 25a , hrc fuse hbc type 32a , hrc fuse hn type 10a , hrc fuse hn type 16a , hrc fuse hn type 20a , hrc fuse hn type 32a , hrc fuse hn type 63a , hrc fuse hn type 100a , hrc fuse hf type 2a , hrc fuse hf type 16a , hrc fuse hf type 20a , hrc fuse hf type 25a , hrc fuse hf type 32a , hrc fuse hf type 63a , selector switch 16a 2 position , push button contact element no 5a and above , push button contact element nc 5a and aove , flp push button 16amp with enclosure , flp socket 16a with plug , flp socket 32a with plug , flp plug 3 pin 32a , cable gland 0.75 inch, et 14 , cable gland 0.74 inch, et 18 , thimble male female , led plate 90w , led plate 60w , do fuse 32a , driver 90 w flp light , driver 60 w flp light , panel lock , battery terminal cover rubber , ss nut bolt 12mm , ht tape roll 10 meter , pvc tape roll 30 meter , braided copper wire 25mm , heavy duty copper crocodile clips , silica gel blue crystal , multi meter probe 1mtr , cable joint 25mm , cable joint 35mm , cable joint 95mm , cable joint 10mm , contactor ml 1.5 lnt , contactor kit ml6 lnt , contactor kit ml2 lnt , contactor 45a 220v triple pole 2 no 2nc siemens , contractor 125a 3 phase siemens model 3tf47 , contractor 65a 3 phase siemens model 3tf46 , electrical timer 3 phase selec , phase failure relay 3 phase , rccb single phase 32a and above , led bulb 20w pin type , contactor ml6 lnt , cable armoured 1.5sqmm , cable armoured 25sqmm , junction box 4 way , flp panel light indicator , flp pressure switch 10 bar , contactor ml4 lnt , flp pressure switch 16 bar , tc power contactor 32a model lc1d259 , contactor 32a siemens 3tf31 , contactor 32a siemens 3tf35 , battery 150ah 12v lead acid exide express , battery 100ah 12v dry type exide powerplus , magnetic oil gauge relay for transformer

CTN :40064520

10 May, 2025 NA

North 24 Paragana - West Bengal

Tender For tender for supply of snap ring , body , adapter , plug , tube , tube , outlet , valve , oil pump , oil pump assy , spring oil pump , shim , oil pump , snap ring , retainer oil pump , strainer , muffler , ring , bolt , bolt , bolt , flange , washer , band , bolt , clamp , spacer , bracket , bracket , brackt , spacer , elbow , nozzle , o ring , spill hose ( 5 pieces) , banjo bolt , clip , bolt , nut retaining , spill tube , spill tube , nozzle holder assy , packing , banjo bolt , gasket , gasket , nipple , tube , bolt , bolt , element , bracket , bracket , plate , case , valve assy , plug , plug , pin piston , piston ( a type) , piston ring assy , bearing crankpin std(sp) 1 pr , bearing crankpin us 0.25 , pair , bearing crankpin us 0.50 pair , bushing , connecting rod , bolt , connecting rod , dowel pin , snap ring , bearing ball , bearing case , bearing ball , nut , snap ring , bearing ball , case bearing , dowel ring , shaft p.t.o , shaft spline , shim assy , snap ring , snap ring , snap ring , bearing ball , joint bolt , tube , clip , flange , delivery valve assy , gasket , gasket , gasket , o ring , o ring , o ring , oil seal , pump element , seal ring , over flow valve , shim , spacer ring , tapered roller bearing , tapered roller bearng , threaded pin , delivery valve holder , retainer , bearing pin , compressor spring , hexagon nut , hexagon nut , plain washer , roller tappet assy , spring lock washer , straight pin , threaded pin , threaded ring , wood ruff key , control rod , control sleeve , filler piece , flat head screw , intermediate bearing , torx fillister screw , camshaft , compression spring , flat seal ring , flat seal ring , hexagon nut , micro encapsulated screw , pointer , roller , screw plug , screw plug , spring seat lower , spring seat upper , bearing end plate , closing cover , flange bush , guide bushing , pump housing , screw plug , screw plug + , shim plate 1.15 mm , shim plate 0.40 mm , shim plate 0.45 mm , shim plate 0.50 mm , shim plate 0.55 mm , shim plate 0.60 mm , shim plate 0.65 mm , shim plate 0.70 mm , shim plate 0.75 mm , shim plate 0.80 mm , shim plate 0.85 mm , shim plate 0.90 mm , shim plate 0.95 mm , shim plate 1.00 mm , shim plate 1.05 mm , shim plate 1.10 mm , shim plate 1.20 mm , shim plate 1.30 mm , shim plate 1.35 mm , shim plate 1.40 mm , shim plate 1.45 mm , shim plate 1.50 mm , shim plate1.25 mm , support ring , gasket , shaft , rocker arm assy , gasket , arm rocker assy. (intake) , arm. rocker assy. (exhaust) , spring , nut , cover , cylinder head , cover , cylinder head , bolt , bolt , housing rocker , screw , bolt , 45 long , bushing , ce frame , bushing , lever hsg , bushing , drive hsg , insulator , insulator , insulator , lead , ce terminal , switch , bearing bush , bearing bush c e , connector , insul(bush) bottom , insul(bush) top , nut , positive connector , armature , brush , field coil , housing , drive , screw-pole shoe , bush plate asm , drive assy , plunger , spring , brush , solenoidswitch (37s)

State Government

CTN :39996395

28 Apr, 2025 42.55 Lacs

Kharagpur - West Bengal

Tender For supply of different water supply materials for operation & maintenance of water supply for drinking water supply within kharagpur municipal area - detachable joints to ac pipes including supply of rubber gasket, nuts, boltsetc. of best quality to make the joint water tight at required hydraulicpressure all complete as per specification and direction o the engineer-in-charge.diameter in mma) 80 mm dia, b) 100 mm dia, c) 150 mm dia, cast iron double flanged rising spindle sluice valve generally confirming to is14846 having body door /dome/bonnet and cover of cast irongr fg 260,outside screen rising spindle of is 6603 gr-12 cr-13,spindle nut & seat rings are gunmetal as per is:318 ltb2. flanges flat faced and drilled to is:1538 part iv & vi,valves are suitable for maximum working pressurre of 10/16 kg/sqcm(seat test) and body testede to 15/24kg/sqcm 350 nb and above valves should be provided with enclosed gear box and antifriction device for ease of operation.all the valves should be tested by closed end method only.p.n.-1.6 rating. a) 80 mm dia, b) 100 mm dia, c) 125 mm dia, d) 150 mm dia, e) 200 mm dia, f) 250 mm dia, g) 300 mm dia, h) 350 mm dia, cast iron kinetic double orifice type air release valve having small orificeelastic ball resting on gun metal orifice nipple large orifice vulcanite ballseating on moduled seat ring, valve with built-in-kinetic features, isolatingsluice valve mounted in horizontal position and operated by a metre wheelgearing:inlet faced and drilled to is 1538 table 4 & 6. valve suitable formaximum working pressure of 10 kg/cm2 a) 80 mm dia, b) 100 mm dia, c) 150 mm dia, supply of pig lead 99.999% purity, cast iron double flanged single door swing non-return valve generallyconforming to is 14846 having body, door cover in graded cast iron to is210 gr. fg 200, body and door rings and bearing block of leaded tin bronzeto i.s 318 gr. ltb 2, hinge pin of st aisi410 valves suitable for maximumworking pressure of 10 kg/cm and body tested 15 kg/cm . a) 80 mm dia, b) 100 mm dia, c) 150 mm dia, gst

Extension Lead Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government