Latest fabricate Tenders | Government fabricate Tenders

CTN :42971723

30 Dec, 2025 NA

Multi City - Multi State

Tender For fabrication of titanium and aluminium alloy components for space application

CTN :42985466

05 Dec, 2025 NA

Mumbai - Maharashtra

Tender For custom lumber procurement to fabricate various carpentry materials for use during water main repair and maintenance works under ae ww erc office

CTN :42936511

06 Dec, 2025 NA

Pune - Maharashtra

Tender For supply of exp store d d - aluminium partition with glass work , blind curtain with roller for window , curtain 7ft , curtain rods , ceiling curtain railing with curtain , fabrication of store room , display board , patient waiting bench

CTN :42917264

05 Dec, 2025 NA

Pune - Maharashtra

Tender For supply of fabrication work incl electrical provisioning , body worn camera , racks , aluminium partition with glass work

corporations/Associations/Others

CTN :42721109

09 Dec, 2025 2.21 Crore

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : manufacture, fabrication, supply,erection, testing and commissioning with 1x8 mva pr.tr,stn transformer, associated equipments, accessories, control panels, control room and electrical works at o.krishnapuram in trichy metro under tkc thro e tener - electrical material supply, power transformer 33/11kv, 8mva power transformer with oltc, breaker along with ct for outdoor ss 33 kv (gc) vcb (out door) 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (600-300/1-1a) with structure and complete accessories with breaker platform., 11kv (lv) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulatedwith permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (1200-600/1-1a) with structure and complete accessories with breaker platform., 11kv (feeder) vcb (out door) 12 kv, 1250a, 26.3ka per 3 sec., 3 pole gang operated soild dielectric insulated with permanent magnetic actuator operating mechanism with inbuilt vcb bushing embedded dry type epoxy resin cast ct (400-200/1-1a) with structure and complete accessories with breaker platform., potential transformer 33kv potential transformer with tc (single phase unit), 11kv potential transformer with tc (three phase unit), panels ac panel for 33kv ss, 110 v dc annunciation panel type b, 110v dc indoor c&r panel for gc breaker, 110v dc indoor c&r panel for lv breaker, 110 v dc indoor c&r panel for twin feeder, control cables, junction box and accessories 14c x 2.5 sq.mm copper cable armoured, 8c x 4 sq.mm copper cable armoured, 4c x 4 sq.mm copper cable armoured, 4c x 2.5 sq.mm copper cable armoured, 2c x 2.5 sq.mm copper cable armoured, isi mark 19 / 22 mm cable gland as directed by the field engineer., isi mark 25 mm cable gland as directed by the field engineer., isi mark cable 28 mm gland as directed by the field engineer., lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination, supply of gi chequerred plate 6mm thickness, junction box supply of ct/pt junction box made out of 14swg (2mm) m.s.sheet wherever required as directed by the field engineer. the box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400w x 300h x 150d, supply of ac junction box of size 535x310x127mm of 18swg ms sheet including hrc fuse unit-18 nos. should be fitted with base, consumables etc. (the box shall be vermin proof, shall have sturdy hinges and locking arrangements), supply of mounting channel suitable for cbtm 5 terminal block in panel /box as required and as directed by the field engineer., supply of disconnected type terminal block suitable for ct circuits in panels/ box as required & as directed by the field engineer, supply of isi mark bakelite hrc fuse holder with fuse of 2/5/10/16 amps reputed make in panels/ boxes for ac/dc/pt circuits wherever required as directed by the field engineer. 16 amps - fuse holder with hrc fuse, 63amps - fuse holder with hrc fuse, bus & bus materials zebra acsr conductor, 2.0" / 50 mm aluminium bus bar (thickness:5 mm), 22/33 kv pt insulators, 11kv pt insulator, 11kv, 120kn disc insulators (antifog), strung bus eye bolt of 18 - 20 mm dia gi rod of required length suitable for 33kv, 22kv and 11kv strung bus including cost of gi rod and 2nos gi nuts & washer as directed by the field engineer., clamps and connectors tension fitting clamp 4 bolted for zebra, t clamp for 2" bus to single zebra, t clamp for zebra to zebra, switchend clamp for single zebra, switchend clamp for 2" busbar, reducer clamp for 2" bus to zebra, pg clamp for zebra, free end clamp for 2"busbar, corana bell for 50mm bus bar, switch end clamp for mink, seating block for 2" bus bar(for g

State Government

CTN :42920788

16 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection agency:- consig

Central Government/Public Sector

CTN :42739689

04 Dec, 2025 20.60 Crore

Bangalore - Karnataka

Tender For tender for supply of fabrication and supply of 50 composite parts including tool c422lca1048 d d - cfc shim lh tip rib , cfc shim rh tip rib , solid shim lh root rib , solid shim rh root rib , clip spar 2 root , clip spar 3 root , clip spar 4 root , clip spar 5 root , nose rib 1 , nose rib 2 , nose rib 3 , nose rib 4 , nose rib 5 , nose rib 6 , nose rib 7 , fairing angle lh , fairing angle rh , fairing angle fwd lh , fairing angle fwd rh , fairing angle lh , fairing angle rh , p clip sparlet 4 , tube bottom for cable routing , tube top for cable routing , hat for cable routing , nose skin bottom , nose skin centre , nose skin top , nose rib assly.sta 5a , nose rib assly.sta 5b , nose rib assly.sta 7 , nose rib assly.sta 8 , nose rib assly.sta 10a , nose rib assly.sta 10b , clip assly. sta 4 , clip assly. sta 5 , clip assly. sta 6 , clip assly. sta 7 , clip assly. sta 8 , clip assly. sta 9 , clip assly. sta 10 , clip assly. sta 11a , trailing edge block , backup plate sta 1 to 2 , backup plate sta 2 to 3 , tip sparlet 1 , tip sparlet 2 , tip sparlet 3 , cocured fin tip rear , clip spar 6 tip , caul plate , layup and curing tool , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master tool for caul plate , caul plate , layup and curing tool , master to fabricate caul plate , caul plate , layup and curing tool , master to fabricate caul plate , caul plate , layup and curing tool , master to fabricate caul plate , caul plate , layup and curing tool , layup tool , master to fabricate caul plates , caul plate , layup tool , master to fabricate caul plates , caul plate , layup and curing tool , layup tool , layup tool , caul plate layup & curing tool , caul plate , layup tool , caul plate layup & curing tool , caul plate , layup tool , caul plate layup & curing tool , caul plate , layup tool , caul plate layup & curing tool , caul plate , layup tool , caul plate layup & curing tool , caul plate , layup tool , caul plate layup & curing tool , caul plate , layup and curing tool , tool to cast layup core and pressure pad , caul plate , layup and curing tool , tool to cast layup core and pressure pad , caul plate , layup and curing tool , master to fabricate caul plates , caul plate , mould assembly tool , master to fabricate caul plates , caul plate , layup and curing tool , master to fabricate caul plates , caul plate

CTN :42793971

08 Dec, 2025 6.66 Lacs

Delhi - Delhi

Tender For supply of providing, fabrication and fixing of false ceiling in conference hall at dd free dish dth todapur, delhi as per respective drawing sg 10150 , providing of 600mm x 600mm hinged flap flushed doors and fixing it on the ceiling as per requirement of site at dd free dish dth todapur, delhi , providing and applying of 50mm x 50mm x 12mm wooden cornice at all around false ceiling in conference hall at dd free dish dth todapur, delhi , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint in conference hall at dd free dish dth todapur, delhi, after touching on corners etc. , providing and applying 2 coats of wall primer and water based luxury emulsion paint on false ceiling and walls etc. in conference hall, after touching on corners, joints and screw heads etc. , fixing of 2ftx2ft recessed led light fixtures, as per respective drawing with supply of 1.5 sq.mm single core copper cable with laying and wiring of recessed mounted led light and make ready , opening space shall be provided in ceiling equal to the size of aluminium supply and return air grill, diffuser, damper of conference hall at dd free dish dth todapur, delhi ) /bid number : gem/2025/b/6892486 * /dated: 17-11-2025 & & / bid document 1 / 17

Fabricate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector