Latest fall protection system Tenders | Government fall protection system Tenders

Central Government/Public Sector

CTN :42127057

13 Oct, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of safety bracket assembly for bp/fp angle cock for three phase loco as per drg. no. wcr/tkd/el-3-sd-006. one set consisting of 6 items (qty-22 nos.) (1) ms plate 560x150x18 mm thick, is:2062 = 2 nos. (2) ms channel 430x150x6 mm thick, is:808 = 04 nos. (3) ms plate 150x75x10 mm thick, is:2062 = 04 nos. (4) hex head bolt 120, 60 mm length 13 mm threaded with nut, property class 10.9, is:1364 & 1367 = 04 nos. (5) ms flat washer ms, is:2016 = 04 nos. (6) ms spring washer m-20 b, is:3063 = 04 nos., total items per set = 22 nos

Central Government And Public Sector

CTN :42123508

21 Oct, 2025 46.28 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For supply of material and complete items of works for under the work of special repair to conservation and restoration of collapsed boundary walls of tomb of diwan saiyed mohammad khan majhera muzaffarnagar - items to be executed, u/s lime, surkhi, coarse sand, brick aggregate 20 mm-25 mm, belgiri, gum, gur, mud, modern bricks 2nd class, kail wood sleeper (3.05x 2.05x0.10 m), r.r. stone, c.r. stone, careful dismantling of roof in random rubble masonry over bhurji in lime concrete, executed manually to preserve adjacent architectural features and reusable stone material. the work shall be carried out under direction of engineer in- charge, ensuring minimal vibration and no damage to adjoining historic fabric., earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed,, providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin- charge. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, provision for removal of malba for cleaning the sites including collecting, staking and disposal of the rubbish /malba upto 100 meter lead including all the labour and transportation etc complete. out of the monuments premises and further, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift, layer by ramming and watering, lead up to 50 and for all

Central Government And Public Sector

CTN :42123496

21 Oct, 2025 67.01 Lacs

Najibabad - Uttar Pradesh

Tender For supply of materials and job work under the work of mc ew c of am special repair to conservation and restoration of entrance gateway of portion of old palace najibabad bijnor 2025 26 - items to be executed, u.s. lime, surkhi, coarse sand, lakhori brick, brick aggregate, sal wood, belgiri, gum, gur, demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge., demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix (including equivalent design mix), demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in charge. 15.7.4 in cement mortar, taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :15.13.1 of area 3 sq. metres and below, dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 of sectional area 40 square centimetres and above, providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in charge. note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. ( including errection & dismental after work), disposal of rubbish/malba heap,soil etc. from monument to outside of municipal limit by tractor trolly including excavation loading and unloading etc.requirement proper completion of work at monument /site, provision for providing & making lime slacking & mortar pit by means of pit excavation, brick masonry & plastering over it. the size of the over all pit is 8.00m x 3.00m & depth is 0.90m. the pit is divided in to three parts & cement plaster, painting (two or more coats on new work) with oil type wood preservative of approved brand and manufacture, painting(one or more coats) with black japan paint of approved brand and manufacture to give an even shade

State Government

CTN :42120227

14 Oct, 2025 42.75 Lacs

Ferozepur - Punjab

Tender For restoration of road cuts patches including road safety items over bridge culverts road section on mdr 102 rd 2.500 to 16.850 on faridkot kotkapura road.

Central Government/Public Sector

CTN :42123280

13 Oct, 2025 NA

Porbandar - Gujarat

Tender For tender for supply of lp of consumable naval store items against nac d d - turpentine oil solvent , thinner , solder lead , rubberise gloves , paint roller 4 , paint roller 12 , paint roller 6 , paint brush 4 , paint roller 7 , paint roller 9 , paint brush 2 , spray hand liquid insecticide , wonder tape 2 , tape transparent 2 , tape insulation 25mm isi mark , toilet paper , teflon tape , brown sheet laminated , tape transparent 1 , grease ep 2 , steel cleaning liquid , hand towel , spin mop set , wiper long handle , brush with long handle , scrubber with handle , abrasive cleaning pad scrubber pad , battery dry 1.5 v size medium r14 , dvd , pvc flexible water hose 1 , safety gloves cloth , abrasive paper 230 mm x 280 mm , paper napkin , envelope cloth coated 12x16 , envelope cloth coated 10x14 , white spirit , oil and grease remover , lip seal for fire hydrant , rj 45 connection , antirust spray , hot melt gun with glue kit , pest seal , disinfectant fluid white black , cotton rags coloured , cleaning liquid for utensils , cleaning bar for utensils 500 gms , room freshner , white cleaner colin , feather broom phool jhadu

Central Government/Public Sector

CTN :42138310

14 Oct, 2025 1.53 Lacs

Nowrozabad - Madhya Pradesh

Tender For providing and fixing of various safety items to comply dgms violations at kanchan ocm johilla area secl

CTN :41856221

08 Oct, 2025 NA

Guna - Madhya Pradesh

Tender For supply of various lab equipments items for govt. pg college guna district guna (m.p.) - supply of various lab equipments items for govt. p g college guna district guna (m.p.), waterand soil testing analysis kit (digital) : range ph 0 to 14.00 resolution ph 0.01 accuracy ph 0.01 1 digit temp. comp. 0 to 100 deg. c., water bath (06holes) : 6 hole8 ltrs., waterbath(12holes) :12 hole 20 ltrs., water distillation apparatus(single distillation unit 2 litre/hour) : single distillation 5 litres, analytical balance : least cosunt 0.0002g, analytical weight box : 1-100g, fractional weight box : 1-500mg, physical balance : 250gm accuracy 0.1g, digital balance : least count 1mg, single pandigital balance : 0.1mg 200g, digital photoelectric colorimeter : 8 filter,1 ml, digital potentiometer : with hot plate and electrodes, digital conductometer : with cell 1cc and 0.1cc, d.o. meter : polarographic do range: typically 0 to 90 mg/l (milligrams per liter) or 0 to 600% saturation.rdo (optical) do range: usually 0 to 50 mg/l or 0 to 500% saturation., digital naphelo/turbidity meter : digital turbidity cum nephelometer range:-, 200,1000 ntu/jtu resolution:- 0.01 ntu/jtu accuracy:- 3% fs, 1digit display:- 3 digit 7-segment led light source:- ir led detector:- photodiode sample system:- 60 x 25mm clear glass test tubes power:- 230 v 10% ac, 50 hz accessories:- test tube set of 2, operation manual, dust cover, polarimeter half shade : the specific rotation ( ) is a physical property defined as the optical rotation at a path length of 1 dm, a concentration of 10 g/l, a temperature (usually 20 c), and a light wavelength (usually sodium d line at 589.3 nm), melting point apparatus :melting-point measurement range: room temperature - 400 c setting rate of the starting temp. : 50 c~400 c 5 min; 400 c~50 c 7 min minimum digital display: 0.1 c size of the capillary: 1.4mm (outside diameter) 1.0mm (inside diameter), 90mm equipped with color camera and color monitor to observe melting point with ease validation program for standard samples 8 operator names can be storedgraphic lcd display to display all test parameters & test instructions, digital melting point apparatus :melting point measurement range : ambient to 300 deg c starting melting point temperature : settable from 50 to 300 deg c heating time : 3 minutes (up to 300deg c) cooling time : 5 minutes (from 300 deg c) accuracy : +/ 0.5 deg up to 200 +/ 0.8 deg from 200 to 300 temperature display resolution : 0.1 deg c rate of heating (deg c per minute), abbe refractometer : safety bs en 60950-1:11/2006 emc en 55024 : 10/2003 en 55020 : 11/2005, tlc kit : outstanding standardization and quality control exceptional adherence, hardness and surface homogeneity. analyzing samples with high matrix- load without sample preparation. multiple samples analyzed in parallel.highly cost-efficient, fast and economical, centrifuge : 6000rpm, corkboring machine :adjustable guide that permits holes to be bored in any part of a stopper, the knurled chuck - 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. the steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments,, distillation apparatus : single distillation 5 litres, oven hot air : 14" 14" 14 , voltage stabilizer : 2kv, vertex shaker : 6 tube capacity, mixer small : moter capacity 900 watt, water bath(cu) : 4 , heating mantle with energy regulator : 500 w,2litre, single crucible heater : helical wire coil moldatherm insulation platinel ii thermocouple with 10tm compensated lead wire and polarized plug ceramic fiber hearthplate programmable heat-up to setpoint temperature indicates setpoint and process temperatures temperature: 1200 c (2192 f) maximum crucible sizes: 5 (top vestibule id) x 8 (heated depth), water bath rectangularsingle walled : 6 hole 8 ltrs., water bath rectangular :2 hole, kjeldahl distillation unit : unit of 3 tests, microwave oven : 30 ltr convection compatible, soleextractionunit apparat

CTN :42108916

15 Oct, 2025 NA

Godda - Jharkhand

Tender For supply of misc electrical safety items d d ? g? g - glv elec,hand,33kv, with isi specification , rbr gloves eltrcl use upto7500v ac rms , cone sfty, fbr,28in,with reflector , salety goggles , thermometer, non contct, ir , megaphone with microphone 200-500mtr , helmet,f-foundry,with face shield , apron, fre prf , glv, hand,380mm,lthr,for welding , welding screen, helmet,slbt

CTN :42106725

20 Oct, 2025 56.4 Thousand

Chatra - Jharkhand

Tender For supply of safety items - inflatable safety swimming tube , loto kit with hasp, ped lock, tags etc. , battery d size for traffic signal stick , folding ladder 9.5 feet , life jacket

CTN :42095948

06 Oct, 2025 4.00 Lacs

Churu - Rajasthan

Tender For supply of sports items --volleyball ground with safety net (clay) and boundary foundation,kabaddi ground (synthetic mat),thickness 35mmequipment :-badminton paul (iron),kho-kho paul (wooden),volleyball paul (iron),

Fall Protection System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector