Get complete information related to latest Fan Condenser Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fan Condenser Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fan Condenser Scrap Tenders.
Tender For auction sale of others - scrap rcc water tank¿02 nos consisting of ¿structural steel(ms angle, channel, i beam, rolling shutter, plate, tie plate, gi pipe, tie bar patti, toothed gear wheel, window grill, pipe of hand rail, purlin, truss, gi ladder, plate, window sheet, pgi sheet, down take pipes, valley gutter,m20 hex nuts, )structural rails, reinforcement bar, wooden, gi sheets/pipes, mangalore tiles, , flooring(pcc), brick masonary, stone masonary, rcc/pre cast slab/reinforcement ,etc. remarks : - 1. the delivery will be made on as is where is basis and by lot basis. the items mentioned in the description only will be delivered. 2. lot is approachable by kutcha/pucca road. 3. lot number is exhibited/painted on the structure. 4. the quantity is worked out on approximate basis. 5. the delivery will be made on lot basis and no part delivery will be allowed. 6. materials like electric wires, fittings & cables and other such kind of materials. available in side the building/structure which is not within the scope of lot description, shall be handed over by the purchaser to custodian. 7. the items used in fencing around the structure such as rail, tie bar, jali, stone, bricks, wooden pillar or any other items and similar type of material lying nearby the structure/lot will not be delivered. 8. dismantling& cutting is allowed for easy loading purpose at the risk & cost of the purchaser. dismantling is permitted upto ground level only 9. the purchaser should ensure that during dismantling & cutting operation no nearby structure/building should be affected and take necessary care/safety precautions to avoid any mishap as well as damage to railway property. 10. the purchaser will be fully responsible for his labors if any accident/unusual incident occurs at worksite/place during dismantling. extra precaution to be taken if there are trees near the structure or its branches are spread over the same. 11. after complete removal of rcc/bricks/rubble masonry and rubbish from the site, delivery of other items will be permitted and the land should be cleared of all debris before completion of delivery. 12. purchaser should personally visit the site and the see the lot in regard to loading/lifting. no claim will be entertained after saleof lot. 13. only structural rails will be delivered. other type of rails will not be delivered. 14. lot is ok for sale with above observations. stock holder :- sse( works) igp qty :-1.0 by lot.
Tender For auction sale of depot non ferrous scrap - aluminium scrap casting,tappet cover, gear case cover , horn,gate door, chequer plate , small piston, cover, cap pipe, fan blade, value crank , antina in cut pcs, ladder , chequer plate. case,cover ,water tank cover,ceiling perforated sheet,panto fan,steady arm,head light frame,allied machine parts, blower, wire ,guage , clamp, lugs, pulley, pole unit item bush volve ,frame window ,patti strip ,frame sheet ,patra, pipe, gate boom, cap and other type of miscellaneous and similar item with or without heavy ferrous and other non ferrous attachment if any. note 1. loading after 15.00 hrs will not be allowed
Tender For auction sale of depot miscellaneous scrap - 98413405 scrap various types of rubber, pvc, fiber and plastic items consisting of pvc dustbin, tricolour battery, pvc pipe, pvc ice box, pvc sheets, drums, chairs, plastic cane different size, poh kit, metar box, cable skin pvc, tube light frame, pvc cooler body with electirc fan, battery box, canopy, bucket, cane, water tank, casing caping, helmets, pallet, washers, various type of air hose pipe with or without attachment of ferrous both side, air brake cylinder poh kit, released pvc gates, pvc tubelight, fall ceilling, side bearer pu pad ring, pvc, plastic,lpg pipe,da gas pipe, plastic doors, and other rubber, plastic, fibre items used in wagons and various type of pvc, fibre, rubber items of diesel loco and signal & tele communication department etc. of shorts and sizes with or without minor non-ferrous, ferrous attachment. ( in two stack)
Tender For auction sale of condemned rubber dust,condemned led tv and condemned tape recorder etc,condemned iron scrap (gi, angle, pipe),condemned brake drum leyland (iron), fire cylender and water pump (iron) etc,condemned nitrozen machine (iron),condemned clutch plate and pressure plate car,condemned presure jack (iron) - capacity 10 ton,condemned iron dust/part and condemned bearing(iron),condemned motor parts (chasis braket, chasis angel, break booster, shaft etc),condemned rubber scrap (air filter, diesel pipe, oring, oil filter etc),condemned coach fan
Tender For auction sale of depot non ferrous scrap - 98230025: cond & u/s aluminium scrap consisting of frames,aluminium gutter, window frames,beadings,end cover,fip cover,fan parts,piston, ladders, channels, doors frames, clamp, aluminium stand,chair frame, aluminium plate/flat/ angle/ sheet /cutting sheet/ channel/pipe,tappet cover, pump cover, sump cover, steady arm with/without gi,utensils/vessels,sign/caution board,loco parts, horn,pantograph parts, sleeve,push rod,fip support cover,cylinder head cover,floating bush,gear case top,glow rod gauge short and long,compressor piston,compressor fan,valve body,fan blade,slash sliding frame,radiator fan leaf,love joy coupling,various sizes of pulley,connecting rod ,various sizes of piston connector, piston enfield greaves,piston honda, various sizes of piston chain saw,crank case/barrel,chain saw/brush cutter cylinder,head chamber,aluminium pipe for brush cutter,honda brush cutter cylinder,broken pieces of various aluminium parts,gear case and plate,gear case brush cutter with broken parts,broken parts bifurcated impellers, extrusions, sign boar with/without wire attachments,propeller, pully,extrusions, aluminium pieces,convertor, valve, air dryer parts, wiper parts, cam house, pressure gauge, propeller,aluminium trolly parts, compressor case, light fittings and parts, water tight fittings, tube light fittings, gauge cum levels, antenna, slab and such other similar aluminium items with or without ferrous, nonferrous and other attachments as is where is condition. location:in front of rack no.6, adjacent to wall -3,4 and tub no.7 of ward 04/ssd/ptj
Tender For auction sale of others - scrap abandoned masonry structure railway quarters: total 48 unit in 02 block as follows. [1] qtr. no-1/os/50, type-i, total units-24, [2] qtr. no-1/os/53, type-i, type-i, total units-24, [i] no of bricks-229082 nos,[ii] rcc works-26933 kgs[iii] ms angle-949.964 kgs [iv] ms rod-71.12 kgs,[v] iron door (02 nos)-80 kgs,[vi] celling fan pipe-210 kg [vii] gi water pipe-832kgs [viii] wooden doors (16 nos)- 1886 kgs,[ix] wooden window (33 nos)- 2049 kgs,[x] pvc door(03 nos) -10 kgs,[xi] ps water tank (12nos)-400 kgs[xii]pvc rain water pipe-162kgs. total ferrous � 29.076mt,wood-3.935 mt,pvc-0.572 mt,bricks-229082 nos.
Tender For auction sale of rolling stock - lot no.divn/mn/21/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) sc 057422/c gs 2) se 058413 gs 3) se 058414 gs 4) sc 037231/c wgscn 5) se 058254 wgscn 6) se 058227 wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos. serviceable bogies against srl no: 01-01 (end-1), srl no.02-01 (end-2), srl no.04-01 ( end-1) and srl no. 06-02 (both bogies are serviceable) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-01, srl no.03-02, srl no 04-01 and srl no 05-02nos. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.
Tender For auction sale of rolling stock - lot no.divn/mn/22/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058802 wgcb 2) cr 054534 wgscn 3)wr 052380 wgscn 4) er 022337 wgscn 5) ec 024283 gs 6) nr 05272 wgscn 7) se 048702 gslrd nb: [1]. (a) all coaches are to be sold without 28 nos. wheel sets complete alongwith roller bearing against srl no 01 to 07 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against srl no: 04-02 (both bogies are serviceable) (c) the coaches are to be sold with 12 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 02-02, srl no.03-02, srl no 05-02, srl no 06-02nos and srl no 07-02. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 02 nos of bogies with complete fittings & 28 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.
Tender For auction sale of rolling stock - lot no.divn/mn/09/04/26-27/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 008839 vph 2) se 908914 rs 3) se 908915 rs 4) se 908981 art/rhv 5) se 918921 ce 6) se 898964 art/sv nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 05 nos.serviceable bogies against srl no: 02-02 (bogie no.1831/07 & scn 057/15), srl no.05-02 (bogie no accw 5143/04 & 052360/05), srl no.06-01 ( bogie no. scn 1366/14) (c) the coaches are to be sold with 07 nos.unserviceable bogies without excluded fittings. against srl no. 01-02, srl no 03-02, srl no.04-02, and srl no 06-01no. (d)the coaches are to be sold with 04 nos. ng rail. against srl no.02 and 03. nb[2]: special condition for rolling stock- (a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 05 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.
Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, sliding doors, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 3&4