Latest farmer crops management system Tenders | Government farmer crops management system Tenders

CTN :42407215

05 Dec, 2025 NA

Ranga Reddy-T - Telangana

Tender For bid to ras corrigendum : supply of simulator software , monitor , vr goggles , simulator pc , master pc , master monitor , monitor wall mount , wall mount table , seating and workstation , software development , env con system , inverter set , server cabinet , lan connectivity , installation and fittings , training materials , conferencing system , fall ceiling , projection system

CTN :42901834

09 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipments - purchase of equipment, 1. configuration design an 8-channel battery analyzer and its accessories 2. power 425 w3. voltage measuring range: 25 mv to 5 v, discharge minimum voltage: 0v or better, accuracy: 0.05% of fs4. current range: 0.5 ma to 6 a, accuracy: 0.05% of fs or better 5. power per channel output power: 30w, stability; +/- 0.1% of fs or better6. time rise time: 1ms (0~full range)7. frequency 10hz8. charge mode of operation: cc, cv, cccv, cp end conditions: voltage, current, relative time, capacity.9. discharge mode of operation: cc, cv, cp, cr, end conditions: voltage, current, test time, capacity, energy.10. pulse mode charge: cp mode, cc mode, discharge: cc mode, cp mode, min pulse width: 500ms, automated switch: automated switch from charge to discharge for each pulse end condition: voltage, relative time11. dcir support for the calculation of the point of the dcir12. cycle cycles: 1 65500 or better, steps: 250 or better, nested function: max three levels of loops13. protective function software, power-down data protection, user-defined safety (upper and lower) tolerance of current, voltage, and delay time14. channel features independent pairs of closed loops for the constant current source and constant-voltage source15. test reports and curves for analysis different types of curves created by software based on user definition. (voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc.), data reports created by the software. comparison of the performance of the batteries tested in channels, both visually and statistically16. channels independent control17. ac input ac 220v 10% / 50hz 18. voltage and current testing sample 4 wire connecting 19. noise 85db20. data management mysql database21. communication means tcp/ip protocol22. data output excel, txt23. communication interface ethernet port24. number of channels per cabinet 825. accessories: 1. bi-potentiostat: electrochemical workstation or moduletechniques the system should be capable of running the rde / rrde technique simultaneously cyclic voltammetry (cv) with simulation/fitting programs linear sweep voltammetry (lsv) with stripping bulk electrolysis with coulometry (be) differential pulse voltammetry (dpv) with stripping normal pulse voltammetry (npv) with stripping tafel plot (tafel), potentiodynamic deactivation, pitting corrosion, corrosion rate, linear polarization, corrosion current, etc. multi-current steps (istep) amperometric i-t curve (i-t) lifetime testing open circuit potential time (ocpt) chrono amperometry (ca) chrono coulometry (cc) chronopotentiometry with current ramp (cpcr) potentiometric stripping analysis (psa) auxiliary signal measurement channel ir compensation external potential input galvanostatic charge discharge single/multiple cycle -chrono potentiometry (cp) with potential limits, polarity by potential or time, no. of cycles etc. voltage vs current density curves single or multiple potential steps with charge limits, single or multiple current steps, mixed voltage/current control using macro. i-v measurements, i max, pmax, fill factor, etc.impedance ac impedance (imp) 10 hz to 3mhz impedance time (impt) (mott-schottky) impedance potential (impe) impedance simulator with fitting open circuit potential time (ocpt)hardware specification of bi-potentiostat workstation/ module: potentiostat / galvanostat module, 2- or 3- or 4-electrode configuration maximum potential: 10v, maximum current: 250 ma peak or better and 2 amps with +/-25 volts for higher current measurement. compliance voltage: > 13v or better, potentiostat rise time: 300 ns or better galvanostat applied current range: 3na to +/- 100ma or better and upto 2 amps applied current accuracy: 20 pa or better input bias current: 1 pa or better cv and lsv scan rate: 0.000001 to 10,000 v/s. ca and cc pulse width: 0.0001 to 1000 sec imp frequency: 0.00001 t

CTN :42882141

08 Dec, 2025 NA

Ramgarh - Jharkhand

Tender For corrigendum : supply of video wall 8x6 - chip on board , desktop pc - all in one , simulator controller with software , fpv simulator , fpv goggles , ups for simulator pc centralized , nano training drones , training drone assembly kit , 7 inch fpv drone , ew environment kamikaze drone , mission ready tool kit , multimeter , soldering machine with paste and wire , 3d printer , propeller balancer , wall boards with back lit , model aircrafts , quadcopter only day clip release , quadcopter with night camera clip release , computer tables , computer table chairs , combat rings with multiple level of obstacles , spare batteries for each drone type 2for each drone , audio system , fixed wing drone

CTN :42949740

15 Dec, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of purchase and establishment of drone trg hub at jak li rc d d - 75 inch interactive flat panel , desktop pc with graphic card , desktop monitor , 55 inch screen led , fpv goggles , ups for simulator pc centralised 8 kwa , 3d printer , model aircrafts , computer table , computer table chair , audio system , vr headset , podium , training drones micro category , 7 inch fpv drone , quadcopter only day camera with payload dropping mechanism , simulator controller with software , spare batteries for each drone type 4200 mah , spare batteries for each drone type 6800 mah , standard warranty , annual maintenance contract amc will commence after end of the 1 year standard warranty

CTN :42949998

09 Dec, 2025 NA

Hisar - Haryana

Tender For supply of high performance pc , simulator software , simulation gcs (ground control station) , vr goggles

State Government

CTN :42954527

18 Dec, 2025 4.81 Crore

Nagpur - Maharashtra

Tender For supply of virtual simulator : : - vr training platform server hardware , client training stations hardware_laptops , headset, haptic gloves, haptic suit , motion tracking system with body tracking for firefighting vr training , simulated firefighting tools , cables, connectors, rack and networking accessories , vr software , vr modules_scenarios , 85 inch smart board , manpower, installation and training

CTN :42955053

08 Dec, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of ttieg grant d d--3 dof drone stability jig alongwith proprietary software , bldc motor thrust bench alongwith proprietary software , drone sensor integration and programming station , flight controller assembly programing station , battery charging and testing station , battery repair station , vr drone simulator

CTN :42933464

06 Dec, 2025 NA

Barmer - Rajasthan

Tender For supply of drone simulator training software

CTN :42939347

17 Dec, 2025 NA

Delhi - Delhi

Tender For supply of drone training hub d d - video wall 8 x 6 chip on board , desktop pc all in one , simulator controller with software , fpv simulator , fpv goggles , ups for simulator pc centralised , nano training drones , training drone assembly kit , 7 inch fpv drone , ew environment kamikaze drone , mission ready tool kit , multimeter , soldering machine with paste and wire , propeller balancer , 3d printer , wall boards with back lit , model aircrafts , quadcopter only day clip release , quadcopter with night camera clip release , computer tables , computer table chairs , combat rings with multiple levels of obstacles , spare batteries for each drone , audio system , fixed wing drone , amc for four years after warranty period

Central Government/Public Sector

CTN :42832731

10 Dec, 2025 NA

Warangal-T - Telangana

Tender For tender for supply, installation, training and commissioning of fanuc cnc simulator software nit warangal as per the specifications attached in section - 3.

Farmer Crops Management System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector