Get complete information related to latest Fastener Sale Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fastener Sale Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fastener Sale Tenders.
Tender For supply of upvc overhead sheets with support frames for workplace facilities component cleaning for a n area of 670 sqft as per specifications: 1) weather protective upvc sheet of dimension 12 feet x 3 feet w x 2.3mm t - 10 nos/set, 2) weather protective upvc sheet of dimension 10 feet l x 3 feet w x 2.3 mm t - 7 nos/set, 3) outer frame for area of 10 ft l x 42 ft w with 75 mm square tube of 3mm t x 20 feet l - 12 no s/set, 4) cross support braces for area 10 ft l x 42 ft w with 2 inch square tube of 3 mm t x 20-feet l - 10 nos/set, 5) base plate of dimension 8 inch l x 8 inch w - 16 nos/ set, 6) anchor fastener bolt 12mm - 40 no s/set, 7) sheet fixing with corroshield screws with hardened c1022 steel with epdm washer and upvc s crew cap - 150 nos/set, 8) fitment accessories and consumables - 1 set. note: firm has to remove the exist ing frames and surface preparation to be made as per specific requirement. [ warranty period: 30 month s after the date of delivery ]
Tender For supply of constuction, fabrication, installation and setting up of pradhan mantri jan aushadhi kendra (pmbjks) at ujjain railway station (circulating area) as per drawing & details attached of nid, adi , furniture steel. 12 compartment steel cloth locker h 2000 mm x w 910 mm x d 550 mm, material: ms sheet conforming to commercial quantity cr-1, grade 340 of is 513:2008, sheet thickness: 0.8 mm. make neeman or similar , central table rectangular shap with ss base and wooden top of size 4 x 2 x 1.5 (design, size, and brand to be approved by c.a.) , visitors chair cushioned pch-7003 godrej, dice, methodex.one sample to approved. , supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification enclosed herewith( back rest with seat partition) drg rdso/wks/2018/2 dt 05.06.2018) bench should be installed at station, station and qty. at each station will be advised by this office , supply and installation of ss swing bin hdpe 40 litter capacity (one set of three colour black+ blue+green) with sticker with ss stand of 304 grade approximate weight 10.00 kg with fastener.a sample to be approved. , supply and fixing of wooden reception table with following specifications: width x height x depth: 1524 x1069 x1524mm, 18mm thick pre laminated novapon board with melamine finish. two storage units with locking facility, high-quality locking mechanism available with a duplicate key, frame type: free standing, shape: l shape,model: office reception make godrej ikea, zuari wipro durian, a sample and design to be approved. , bed side table spec of item teak wood modular drawer with locker brand nilkamal, cello, godrej interio, ikea, zuari, wipro supreme size 475mm*457mm*432mm with two storage one sample to be approved before supply. , metal bed, made of tubular steel ss 304 rectangular / sqaure section, size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head. structure ss 304 pipe, thickness of hollow section in structure 1.3, material of mattress panel plywood sheet/ ss pipe, thickness of mattress panel 1.2 mm, height of bed 450 mm, paint/finish of m s parts powder coating, finish of head board powder coating, min powder/paint coating thickness (micron) = 60 micron , bath room set9 1)pvc bucket 20 l=01 ??. (2)pvc mug 1 l=01 no. (3) pvc patla stool 1x1 01 no. (4)s 5 soap case 01 no. (5) cloth hanger 01 no. (6) bath mirror pvc frame #01 no. (7) pvc d*bin 9 lit. 01 one sample to be approved. , teak wood make glass top centre table. size:-width-48 x depth-24 x height-18". a sample to be approved before supply. , double bed mattresses skin sens ultra gold fabric acro sleep memory foam size 6 x 6.5 x 6 godrej, springfir, sleepwell or kurlon or better , almirah steel small 1980x920x480 mmitem code: 781520831142 item type: supply item description: almirah steel shelving cabinate mild steel sheet confirming to grade hri of is: 1079-2009 size 1980x920x480 mm with proper lock and key , office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5x2.5x2.5 make jalaram, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca , supply of wooden luggage rake made of 3 layer pre laminated particle board with aluminum/steel in lay on top smooth movement of luggage for waiting and retiring room (design, size and brand to be approved by c.a. , bathroom sets(1) pvc bucket 20 ltr. 01 no. (2) pvc mug 1 ltr. 01 no. (3) pvc stool (patla) 01 no. (4) pvc soap case 01 no. (5) cioth hanger 01 no. (6) bath mirror pvc frame 01 no. (7) pvc dust bin 9 ltr. 01 no. one set of sample to be approved by c.a. , supply and installation of superior quality eyelet curtain with ss rod and bracket set and all fitting arrangement for doors and windows. curtains panna 48 inch quality, design and brand to be approved by ca before supply , wall panelling of louvers with profile light & customized wallpaper on wall. make - abm or as simil
Tender For supply of set of high tensile fastener consist of - i) 01 no. per set hexagonal head screw (full th read) with thread size m 16 x 50 mm long 2.0 mm pitch ( is: 1364, (pt.- 2) : 2002, property class : 10. 9), ii) 01 no. per set hexagonal nut with thread size m16 (is : 1364 (pt.3) : 2002, property class : 10), iii) 01 no.per set hexagonal thin nut with thread size m16 (is : 1365 (pt.4) : 2003, {property class : 5 ), iv) 02 nos. per set plain punched washer for m16 (is : 2016-1967, type-a, material : steel, phosphat e coated) v) 01 no. per set spring lock washer for m16 (is : 3063 : 1994, type - a, right hand, phosp hate coated), vi) 01 no. split pin of size : 3.2 mm x 40 mm, is: 549:2005, material steel), centre of sp lit pin hole (hole dia 4 mm) at a distance of 5 mm from the tail head. vii) all are in assembled condition except the split pin shall be packed in cartoons or wooden box separately. [ warranty period: 30 mo nths after the date of delivery ]
Tender For purchase of miscellaneous c class items annexure c for emd plant dongri buzurg mine-, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 1/2" nb, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 2" nb, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 3" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 1" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 3/4" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 2" nb, ms reducer socket weldable - 1" x 1/2" , chlorinated rubber paint - smoke grey in 20 lit. pack, thinner for chlorinated rubber paint berger/asian make or equivalent in 20 lit pack, oxygen regulator two stage 10x-63b, acetylene (da) regulator, single stage two gauge, hand shield armour with welding glass - 83 x 108 mm, ms elbow welded - 1/2", hdpe pipes 5 meter long: complete with 2 nos. m.s. slip on flanges as per bs 10, table d, at both end and 2 nos. long neck pipe end conf. to iss duly welded at both ends of pipes. - od 63mm, hdpe long neck pipe end od 63 mm, welding electrode - delta therm ss3-3.15mm or equivalent., welding electrode - delta therm ss-3 - 4 mm or equivalent., v belt b-70, v belt b-128, v belt b-48, spun cotton thread for bag closing m/c (suitable for 25no. needle modi thread no.2. (in cone of 1000 mtr.), welding hand gloves (leather) 14", helite packing non-metallic - 1/8" thick champion make (red coloured), painting brush - 2-1/2", rock drill hose pipe non metallic, working pressure 6 kg/sq.cm. size 3/4", rock drill hose pipe non metallic, working pressure 6 kg/sq.cm. size 1", teflon tape roll - 3/4", m s welding electrode - 3.15 mm (weldfast make or equivalent), m s welding electrode - 4 mm (weldfast make or equivalent), white chindhi (waste cotton for cleaning), bucket fastener dia.3/8" x 1-1/2" long, rubber packing sheet - 1/4" thick, cutting wheel- 4" (corburondum make or equivalent), mild steel hex.nuts & bolts (full threaded bsw) dia. 3/8"x2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.1/2"x2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.1/2"x2-1/2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x3" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x4" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x5" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x6" long, set of 12 nos. double ended ring spanner, size: 6x7 to 30x32 (taparia make only), set of 12 nos. double ended ring spanner, size: 6x7 to 30x32 (taparia make only), "thermocouple: sheath leangth 900 mm, type : k as per ansi mc 96.1, limits of error : standard (+/- 2.2 c), nos. of circuit: one (simplex), hot junction: ungrounded, sheath diameter : 12mm, sheath length : 1000 mm, sheath material : inconel 600, process connection : adjustable s.s.flange 1/2"" asa 150 rf, wire gauge : 16 swg, insulation : ceramic beads with mgo, tip rating : 1150 deg. c, termination : our standard weather, (proof die cast alluminium head with threaded cap chain & powder epoxy coating), cable entry : 1/2"" bsp (f), single", pvc half gum boot with specification:- cotton lining (inside), black colour, lsl marked, industrial outsole material . pvc. pu ankle low & high ankle material pvc usage/ application industrial features anti skid, heat resistant, length low ankle, gender male & female with lining, steel toe cap, sole color black, 14" length, certification lsl, heat resistance up to 120 deg.cel. , suitable for acid & alkalies resistance. mangla make or equivalent, size: no.6, pvc half gum boot with specification:- cotton lining (inside), black colour, lsl marked, industrial outsole
Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material