Latest fasteners Tenders | Government fasteners Tenders

Central Government And Public Sector

CTN :40010459

21 Apr, 2025 NA

Lumding - Assam

Tender For supply of preset air filter and regulator 1/4 at 3 bar pressure with bracket and fasteners designed for pressurised flushing system make - spac or similar

Central Government / Public Sector

CTN :40010583

13 May, 2025 NA

Multi City - Multi State

Tender For supply of parallel clamp (150/ 160)(1051-3) r.i. no. 1051-3 with gi fasteners bolt 16x50x38 with nut and spring washer as per rdso spec. no. ti/spc/ohe/fittings/0130-10/13-rev1, rdso. drw: et/ohe/p/1050-3 rev. -a & str: core-str-16 rev-1

Central Government/Public Sector

CTN :40004443

22 Apr, 2025 NA

Medak-T - Telangana

Tender For tender for supply of fasteners - reduced shank stud m48x360 , stud m80 x 6 x l- 390 x t- 342 , stud m72x6x305x257 , stud m56x220 , hex screw m64x210 , hex screw m64x170 , hex.hd.bolt m64 , hex.bolt m52 , hex nut m56 , hex nut m72 x 6 , hex nut m80 x 6 , hex.nut m48

CTN :40004820

25 Apr, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of 10 types of fasteners - 7004612030 bolt m12 6gx30.88.38xc.016 gost 7798 70 , 7004506025 bolt 3m6 6gx25.88.38xc.016 gost 7798 70 , 7002910030 bolt m10 6gx30.88.38xc.016 gost 7796 70 , 7102001000 nut 520.02.001 , 7008408016 bolt m8x6gx16.88.016 gost 7808 70 , 7007920050 bolt 3m20x50.66.016 gost 7808 70 , 7002912040 bolt m12x6g.40.88.016 st38xc gost 7796 70 , 7102001006 nut 520.02.001 06 , 7002708020 bolt 3m8x1 6gx20.46.016 gost 7796 70 , 7024304032 nut m4.6h.8.40.016 gost 5927 70

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

State Government

CTN :40012567

28 Apr, 2025 NA

Karur - Tamil Nadu

Tender For procurement of expansion cloth with bloster along with fixing frame assembly and fasteners complete boiler

Central Government/Public Sector

CTN :40007866

18 Apr, 2025 NA

Palakkad - Kerala

Tender For supply of fasteners

CTN :39940005

16 Apr, 2025 56.64 Lacs

Ganganagar - Rajasthan

Tender For tn-mm-2047-supply of spares for air pre heater 27.5 vimt 2000 unit #1 to 6 250 mw at sstps suratgarh - supply item, soft touch inboard seal ce (cw) 2.5x155x1460, soft touch inboard seal ce (ccw) 2.5x155x1460, soft touch inboard seal he (cw) 2.5x155x1460, soft touch inboard seal he (ccw) 2.5x155x1460, soft touch interm seal leaf he/ce 2.5x155x1280, soft touch seal leaf inter he/ce 2.5x155x1020, soft touch outboard seal ce(cw)/he(ccw) 2.5x155x492, soft touch outboard seal he(cw)/ce(ccw) 2.5x155x492, inboard hold strip ce cw/ccw 2.5x80x1425, interm hold strip he/ce 2.5x80x1100, inboard hold strip he cw/ccw 2.5x80x1005, outer seal hold strip he/ce 2.5x80x530, holding strip, by pass seal, ib diaphram seal ce(cw) 2.5x93x1460, ib diaphram seal ce(ccw)2.5x93x1460, ib diapharm seal he(cw)2.5x93x1460, ib diapharm seal he(ccw)2.5x93x1460, diaphram seal he & ce 2.5x93x1280, inter diapharm seal he/ce 2.5x93x1020, by pass seal ce (cw/ccw) 1.6x181x914, by pass seal he(cw/ccw) 1.6x238x914, rotor post seal he, rotor post seal ce, rotor angle a75x75x8 :2334, t bar for he &ce, by pass angle a 75x75x8 :1385, grating for cold end basket (as per drawing)(1set=12nos), deluge pipe assy. 4000x100, kawool packing strip, cover plate with fasteners for cold end baskets (1set =12nos.), sub total(from 1.01 to 1.30), total packing & forwarding charges, sub total of suppy+p&f (including gst), total freight charges, total insurance charges, other taxes/ charges(if any), total supply amount (2.2 to 2.5)

Central Government/Public Sector

CTN :39977387

21 Apr, 2025 NA

Varanasi - Uttar Pradesh

Tender For turbine fasteners and small machined components

CTN :39977436

29 Apr, 2025 NA

Duliajan - Assam

Tender For procurement of closed drain tank & sump pump for development of condensate removal system (dehydration system) & the associated facilities - supply of closed drain tank & sump pump at madhuban (duliajan), supply of horizontal, cylindrical, underground inside pit, saddle mounted closed drain tank of capacity 27.5 m3 with inlet size of 6 nb, ansi rating 150#, with blind/mounted flanges for nozzles as required as per tender specification, attached p&id, data sheets and technical specifications etc., gaskets for all flange joints as mandatory spares, fasteners for all flange joints as mandatory spares 20% (min. 04 nos. of each size & type), gaskets for all flange joints as pre-commissioning & commissioning spares, fasteners for all flange joints as pre-commissioning & commissioning spares 10% (min. 02 nos. of each size & type), design, engineering, manufacture, procurement of materials and bought out components including, assembly at shop, inspection, testing at manufacturers works, packing & delivery, supply of vertical submersible (type vs4) sump pump with design flowrate of 6 m3/hr as per data sheet, p&id and technical specifications including supply of all commissioning spares, special tools and tackles, supervision of erection and commissioning of item no.1 & 2 (with per diem rate).

Fasteners Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector