Get complete information related to latest Fd Fan Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fd Fan Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fd Fan Scrap Tenders.
Tender For supply of radial fan for fdu for wag-9 loco to type no. rl 90- 18/12n 12 volt dc 460ma, 6.3 watts. [ warranty period: 30 months after the date of delivery ]
Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc
Tender For supply of ems service te railwaypura - pvdg reneted oump for use , replace 50mm gi b class pipe , sf 3inch half turn valve gi , sf 2inch half turn valve gi , modify 3inch water line by pvdg 3inch flange , modify 3inch water line by pvdg 3inch nipple , modify 3inch water line by pvdg 3 inch tee , modify 3inch water line by pvdg 2.5 inch nipple , modify 3inch water line by pvdg 3 and 2.5 inch socket , modify 3inch water line by pvdg 2.5inch coupler , modify 3inch water line by pvdg 2 inch nipple , modify 3inch water line by pvdg 2 inch tee , sf 50 mm nrv , plumbing work for priming assembly , arrangement of automationof extg water supply by pvdg 5 hp dol starter , arrangement of automationof extg water supply by pvdg 63a 4p changeover mcb , arrangement of automationof extg water supply by pvdg auto timer 24 hrs , arrangement of automationof extg water supply by pvdg wlc , arrangement of automationof extg water supply by pvdg 63a 4p mcb , arrangement of automationof extg water supply by pvdg 3.5c 50 sq mm et , arrangement of automationof extg water supply by pvdg 200 a terminal , sitc 10kvar app capacitor , rewind ex fan ped fan motor upto 200w , rewind ceiling fan motor upto 1400 mm , replace 4 ft 36 w t rod , replace 4 ft 18w led , replace 4 ft 230 v tl starter , replace electronic choke for tl , replace side holder for tl , replace 5 amp piano switch , sdrg 1no 1.5 sq.mm frls cu wire , s drg 2no 1.5 sq.mm frls cu wire , replace 2 module electronic regulator , refill fire extgshr 4.5kgs , pvdg hosepipe for fire extgshr 4.5kgs , sf 12v 26ah battery fda system , conduct fire drill for bldg g plus 3 flr , service 11kv substation with ht panels , repair of substation panel by repacing led ind lamps 220v , repair of substation panel by repacing 2 to 4 a hrc fuse , repair of substation panel by repacing lml1 contactor kit , repair of substation panel by repacing bimettalic ol for blower mn2 , repair of substation panel by repacing spp ol relay mpr1 , repair of substation panel by repacing 8 pin 220v pla relay , repair of substation panel by repacing 0 to 400a ammeter ac , repair of substation panel by repacing 0 to 30 a ammeter ac , repair of substation panel by repacing 0 to 500v voltmeter ac , repair of substation panel by repacing dc ammeter 96mm , repair of substation panel by repacingdc voltmeter 96mm , repair of substation panel by repacing selector switch , b check service of dg set 320 kva , supply smps battery charger 24v 10a , sf 12v 130ah mf battery for ea set , supply brass battery terminals , pvdg led ind lamps 220v ea set , sfixing bradided fuel pipe for ea
Tender For supply of general electrical goods for season 2025-26 - supply of general electrical goods, backlite pipe " bore, 3mm thick, glass sheet " thick, bakelite rod " dia, round type hrc fuse 63 amp ee make, round type hrc fuse 100 amp ee make, amp meter ct operated flush type 96x96 mm 200/5 ratio analog, amp meter ct operated flush type 96x96 mm ratio 150/5 analog, amp meter ct operator flush type 96x96 mm 100/5 analog, amp meter ct operator flush type 96x96 mm 200/5 analog, -do- 300/5 analog, -do- 600/5 analog, -do- 400/5 analog, -do- 800/5 analog, volt meter 0-500 volt 96x96 mm digital, varic unit vac 15 amp, pressure switch range 1-4kg/cm2 5 amp. demfpso, pvc flexible copper wire 1x1.5mm2 national make coil, pvc flexible copper wire 1x1.5mm2 national make, rpm meter meco 0-1200 rpm digital, semi conductor fuse gsg 100 amp. alston/ gf make, -do- 150 amp., dc volt meter with sunt 25amp (0-200) digital, dc volt meter 0-200 volt digital, rail mounting terminal block 10mm2, step down transformer 1500 watt. 240v, step down transformer 1500 watt 24 volt, power board card kfc make 700 hp panel srp model, control card kfc make 700 hp panel srp model, g.o operational amplifier card, field regulating card kfc make srp model, current transmeter ratio 50/5, current transmeter 100/5, current transmeter 150/5, " 200/5, " 300/5, " 500/5, " 800/5, " 400/5, pvc copper wire polycab make all size discount coil on prevailing price list, pvc aluminium wire polycab make all size discount on prevailing price list, flush type switch 5 amp anchore make, -do- 15 amp ", flush type socket 5 amp ", -do- 15amp ", tumbler socket 5amp ", tumbler socket 5amp ", 20 watt led light tube rod, p.t holder pendent type k-555 100 watt, s.t. holder pendent type 100 watt jyoti, s.t. holder pendent type 300/300 watt jyoti, p.t holder angle type 5 amp.k-555, slipring 120 hp 1440 rpm 50 hz ee make, slipring 90 hp motor, push botton 1no+1 nc on off vaishno make with element, plastic cooling fan 7.5 hp motor kh-132, -do- 15 hp kh-160, -do- 20 hp kh-160, -do- 25 hp kh-160, -do- 10 hp kh-132, -do- 5 hp kh-132, pvc tape " 10 mtr. long steel grip, pvc tape 1" 10 mtr long steel grip, glass tape " 30 mtr long, glass tape 1" 30 mtr long, cotton tape 1" 30 mtr long, electro graphite carbon for 700 hp motor grade eg 298 ke make, electro graphite carbon brush for 100 hp motor grade eg 224, electro graphite carbon brush for 75 hp motor grade eg-224, electro graphite carbon brush for 15 hp excitor eg-1875 kva., copper metallic carbon brush 280 amp. slipring of 1857kva, back spring for 700 hp motor ke make, back spring for 100 hp motor ke make, back spring for 75 hp motor ke make, copper metallic carbon brush for 250 hp motor ke make, copper metallic carbon brush for 150 hp motor kec make, copper metallic carbon brush for alternator spring kec make 22x32x40, electro graphite carbon brush for 18.5 kw dc excitor/26 hp slipring motor, crane duty 50 hz 415v 960 rpm without slipring resistance, amp meter 150/5 with ct digital 4"x4", power factor meter 144/144 mm2 digital complete with all accesaries ct etc., glass sleave 2 mm (2/90 meter), glass sleave 4 mm (2/90 meter), glass sleave 6 mm (5/90 meter), glass sleave 8 mm (6/90 meter), glass sleave 10 mm (9 meter), fibre rod 2/2"x1", copper metallic carbon brush 163 kva dg set alternator, bridge rectifier 35 amp usha make, 8 micro ferrodde condenser 440v, 4 -do-, 2.5 -do- 215v, 3.15 -do-, bare copper wire 4 swg mild, brass carbon holder with pin cane unloader 20x20x100 no., carbon brush for cane unloader 20x20x100, thyristor 604 usha make dcr, thhyristor 1004 usha make dcr, backtol red dr. beck, backtol grey, air dry insulation varnish elmo lufta a dr. beck, nicrome wire for heater element 2000w 21 swg, -do- 1000w 21 swg, thiner dr. beck make t-235, isolation dr. beck make t-235, dc volt meter 0-600 with rpm motor 0-1595, 4"x4", rocker rpm for 100 hp dc motor, aluminium cooling fan 150 hp motor, -do- 100 hp motor, -do- 75 hp motor, -do- 50 hp mot
Tender For supply of trg aggregates for tech trg of offrs - video capture card , oled display module , 2 core wires , fastners , nuts and bolts, 6mm and 8mm , micro hdmi to hdmi cable , soldering lead , 18650 batteries , 2000 mah 4s lipo , 3d printed fpv camera mount , 3d pront mount for gopro camera , 5 inch hd propellers , 5.8 ghz vtx antenna , akk infinite dvr 1w video transmitter vtx , aluminium hexapod frame 25cm x 20cm , raspberry pi 4, 8gb with cooper heatsink and cooling fan , basic electronic components resistors, capacitors , caddx ratel camera , camera hd , custom built 2000 mah 4s li-ion long endurance battery , custom built droping mechanism , dc to dc buck module 5v 2a , echine ev 800d goggles , elrs receiver , esp32 microcontroller board receiver side alert purpose , gopro camera 11 , heavy duty siren , hitech d625 mw servo , hota t6 smart charger , impulse rc apex evo 55 inch frame , kamakazi activation circuit , li-ion battery pack 12v , lithium polimer battery 11.1v 2200ma , m10 gps , metal robot base 250mm x 160 mm , microcontroller board arduino mega 2560 , motor driver 10a h-bridge , motor l type clamps , network router , otg receiver dual antenna , planetary gear motors 30 rpm high torque , radio master pocket , raspberry pi power booster circuit , relay driver board , sd card 64gb class 10 , servo cable 3 core , servo clamps for camera mounting , servo driver boards , servo driver circuit board , servo horn , servo motor 9.6 kg torque , servo motors tower pro mg 958 , speedybee f4 stack , usb camera , usb external antenna , wheels 100mm diameter , wireless transmitter and receiver 2.4 ghz , xing 2207, 2750 kv motors , servo motor metal horns , ir sensors d18 model , 10k resistor , 32gb micro sd card class 10 , 3d printing components , 4 pin push button , 5v 3a power supply , b3 charger , capacitor 10uf, 25v , dc-dc buck module xl4015 , connecting wires jumper cables , li-po battery charge , male header pin , mg995 servo motor 180 degree , raspberry pi-5 8gb , raspberry pi5 power adapter , servo motor mg90, 180 , single standed wire set , usb key board , usb mouse , zero pcb 6x4 , gps modules gps tracking system
Tender For corrigendum : supply of scanner air fan and accessories - fan assly excl fan body 1 no each type a , motor for ac scanner air fan b , motor for dc scanner air fan c , scanner air fan with ac motor 415v ac d , scanner air fan with dc motor 220v dc e , anti vibration pads f , inlet transition piece g , outlet transition piece h , fix bolts nuts and washers and gaskets fitted i , expansion vibration isolator j , expansion vibration isolator k , expansion vibration isolator l , scanner air fan with ac motor 415v ac m , scanner air fan with dc motor 220v dc n , anti vibration pads o , inlet transition piece p , outlet transition piece q , fix bolts nuts and washers and gaskets fitted r , expansion vibration isolator s , scanner air fan with ac motor 415v ac aa , scanner air fan with dc motor 220v dc bb , anti vibration pads cc , inlet transition piece dd , outlet transition piece ee , fix bolts nuts and washers and gaskets fitted ff , expansion vibration isolator gg , expansion vibration isolator hh , scanner air fan with ac motor 415v ac ii , scanner air fan with dc motor 220v dc jj , anti vibration pads kk , inlet transition piece ll , outlet transition piece mm , fix bolts nuts and washers and gaskets fitted nn , expansion vibration isolator oo , expansion vibration isolator pp , fan assly excl fan body 1 no each type qq , motor for ac scanner air fan rr , motor for dc scanner air fan ss , scanner air fan with ac motor 415v ac a , scanner air fan with dc motor 220v dc b , anti vibration pads c , inlet transition piece d , outlet transition piece e , fix bolts nuts and washers and gaskets fitted f , expansion vibration isolator g , expansion vibration isolator h
Tender For supply of controller (pcb) suitable for brushless sensor less dc railway carriage fan (fan specification:rdso spec no. rdso/pe/spec/tl/0021/2005 (rev.3) [ warranty period: 30 months after the date of delivery ]