Latest feeder line repair Tenders | Government feeder line repair Tenders

State Government

CTN :42871582

19 Dec, 2025 NA

Parganas - West Bengal

Tender For mtc of ei work at purta bhawan-repair renovation and load balancing of existing dist system and replacement of diff type fittings along with proper arrangement the existing wiring system on existing cable tray and allied ei work -as and when required - maintenance of electrical installation work at purta bhawan---- repair , renovation and load balancing of existing distribution system and replacement of different type fittings along with proper arrangement the existing wiring system on existing cable tray and allied e.i work -------as & when required

CTN :43015099

23 Dec, 2025 98.60 Lacs

Tiruchirappalli - Tamil Nadu

Tender For providing of custom bid for services - operation maintenance electrical electronics of electrical power distribution system including operation maintenance of 110kv 11 kv 11kv 433v substations at hepf factory township trichy 25 as per scope of work no hepf em 1 6..

CTN :42882096

06 Dec, 2025 8.28 Lacs

Guntur - Andhra Pradesh

Tender For supply and delivery of electrical materials for maimenance of street lights in tadepalli urban 6 to 14, 19 & 20 wards and ippotam, prathuru, chirravuru rural areas under ae-4 section in mangalagiri tadepalli municipal corporation under general funds - "supply and transportation of led driver as per is 15885 (part 2/sec 13) 2012 with input line voltage 120v-270v ac, 50hz with surge protection more than 2.5 kv, ip20,suitable for led indoor luminaire, with 2 years warranty.makes: as per list of recommended brands.elec-3.8.4020w", 36w, "supply and transportation of led driver as per is 15885 (part 2/sec 13). 2012 with input line voltage 120v-270v ac, 50hz with surge protection of 4.0 kv, ip20, suitable for led street light fitting with 2 years warrantymakes: as per list of recommended brands.elec-3.8.4145-90 w", 120-180 w, "supply and transportation of led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f>0.90, high power leds having system efficacy >=120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3 3), driver surge protection 4kv, in house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. makes: as per list of recommended brands as category ielec-3.8.2320 w", 30 w, "supply and transportation of ......... led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f > 0.90, high power leds having system efficacy >= 120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3), driver surge protection 4kv, in house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty.makes: as per list of recommended brands as category ielec-3.8.2490w", 120w, 210w, "supply of wpsc (weather proof single core) isi alluminium wire. makes: gold medal / million/gm/5 vimal/finecab/nakoda/nanadicab/payal, sudhakar/rajrigandha/ airson/orbit/ollvin, elec-1.6.12.5 sqmm wpsc",, supply and delivery of pvc/cotton tape role(8 mtrs) elec-8.1.15, "supply of.......... 10ka c/d curve isi mark.makes: legrand-dx3/schneider-acti9/hager-h3/ siemens-5sx4/ havells stadx/l&t-au/indo asian-opti pro/hpl (techno) elec-2.10.140-63a, sp mcb", 40-63a, tp mcb, "supply of...... porcelain rewirable fuse units.makes: c&s/standard/hpl/sputnik/million/gold medal benlo/anchor elec-2.7.163a, 415v", 100a, 415v, "supply and delivery of pvc box make: sintex including cost & conveyance etc., complete as per lr15"" x 18""" supply and delivery of 8mts pole clamp sets (2no.s per set with bolts & nuts) including cost & conveyance etc., complete as per lr, supply and delivery of spun pole (round) clamp sets (2no.s per set with bolts & nuts) including cost & conveyance etc., complete as per lr, supply and delivery of 1" gi pole brackets (3ft size) including cost & conveyance etc., complete as per lr

State Government

CTN :42971884

30 Dec, 2025 5.23 Crore

Multi City - Karnataka

Tender For survey investigation design supply installation testing and commissioning of tank filling scheme head works consisting of construction of intake well with connecting pipe jack well cum pump house vertical turbine pumps coupled to motors pump house elec works necessaty valves delivery pipe manifold system electrical panel soft starter capacitors 11kv transformer 11 or 0.433 kv substation kv power line and 11kv terminal bay rising main pressure distribution for filling up of 5 nos of mi or zp tanks by lifting water from bhadra river near donabaghatta village of bhadravathi taluk including operation and maintainance for a period of 5 years after successful completion of work for donabaghatta tank filling scheme on turn key basis

Central Government/Public Sector

CTN :42988618

18 Dec, 2025 8.30 Lacs

Kanpur - Uttar Pradesh

Tender For electrical renovation and power system distribution work for display room and customer longue including allied electrical work at hal factory

CTN :42970123

19 Dec, 2025 6.49 Lacs

Visakhapatnam - Andhra Pradesh

Tender For supply of supply and laying of 4c 50 sqmm copper armoured power cable from transformer to powerhouse at dnlh d d - supplying of the 4core x 50sqmm one length copper armored pvc insulated pvc sheathed xlpe power cable from transformer to power house , supplying of the 200a 3 pole 25 ka molded case circuit breakers mccb , laying and fixing pvc insulated and pvc sheathed xlpe power cable of 1. 1 kv grade on wall surface as required , supplying and making end termination with brass compression gland of cable , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete with all labour materials transport in hilly area , laying one number pvc insulated and pvc sheathed xlpe copper armoured 1. 1 kv cable in existing cement trench removing sand cushioning placing new cable properly with all labour tools , installation of 200a 3 pole mccb on existing db including dismantling old mccb making connections with suitable lugs and cables tightening terminals testing and commissioning as required. , supplying and fixing 400 400 15 mm seasoned wooden board for mounting 200a porcelain kit kat fuse at the powerhouse including cutting drilling anchor fasteners holes. , supplying and installing 200a porcelain kitkat fuse on pre fixed wooden board, including incoming outgoing cable connections with copper lugs , supplying and fixing 200a neutral link suitable for terminating multiple neutral cables in lt distribution system mounted on pre fixed wooden board , removing outer sheath of 4c 50 sqmm copper armoured xlpe cable up to 2 m and terminating each core at energy meter using heat shrink sleeves including supply laying , providing laying and fixing 75 mm dia medium class gi pipe in rcc road with gi fittings including 75 mm trenching refilling with rcc materials and using all necessary machinery tools etc. , cable jointing of existing 4c 50 sqmm xlpe copper armoured cable using approved heat shrink kit including stripping cleaning crimping with copper lugs heat-shrink sleeves sealing insulation materials , supplying and fixing 6 mm multiwall polycarbonate sheet as shed roofing over energy meter enclosure 1 m length plus 1 m projection with gi supports cutting fixing with screws edge channels , making 4 inch hole in lighthouse entrance gate wall 600 mm thick for cable entry using necessary heavy machinery and tools and refilling as required , add extra charges for executing electrical work at dolphin nose lighthouse in hill area considering difficult terrain limited access higher labor effort and transportation challenges , miscellaneous items including ss screws anchor fasteners nuts and bolts as required gi clamps for cable fixing copper lugs and other necessary materials.

Central Government/Public Sector

CTN :42974288

19 Dec, 2025 27.70 Lacs

Dapodi - Maharashtra

Tender For 8656 miscellaneous e/m wks and repair/ replacement/ maint of lt electrical distribution system and other connected items at afmc and allied area under ge (cental) pune

CTN :42957564

04 Dec, 2025 89.7 Thousand

Kolkata - West Bengal

Tender For operation and maintenance of electrical and mechanical service like internal and external electrical light and fan, fixture, panels, distribution system, substation, passenger lift, unitary ac, water pump set, portable set, portable fire extinguisher etc. at msme-tc building, 111/112, b.t. road, kolkata-700108 during fy 2025-26. (sh: providing epbax system with kts phone).subwork/packages:providing epbax system with kts phone.

Central Government/Public Sector

CTN :42651148

05 Dec, 2025 25.00 Lacs

Deesa - Gujarat

Tender For corrigendum : repair/ replacement of electrical distribution system and certain e/m items at afs deesa

Central Government/Public Sector

CTN :42948344

08 Dec, 2025 39.92 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of interior setup of mi room building at nayagaon d d--inbuilt iv stand , installation and fixing of overhead curtain track channelled with hooks using quality cotton screen of green shade. , fitment of sun-light proof blinds in the existing 04 in windows 12 square feet and installation of 02 in no. air cooling unit of 1.5 tonnage cooling capacity for conducive temperature. , fabrication and installation of nursing station table 4x3 feet and fitment of ss sink integrated with 01 in no. hot water dispense system. , fabrication and installation of medicine-medical instrument storage rack 6x3 feet with inbuilt multiplicity drawers. , installation and fitment of exhaust system suitable signage board 2.5x1 feet general printed notice board 35x2.5 feet for patient details as per sample. , installation and fitment of isolated patient inspection bed 6x3 feet with inbuilt iv stand along with suitable cooling mattress and three fold hospital partition screen 01 no. , installation of 01 in no. ro water system integrated with deep ss sink provisioned with cold water dispense taps for immediate burn care. , fabrication and fitment of dressing table 6x3x1.5 feet with inbuilt drawers, installation of storage facility for medical utilities of nursing assistant. , fabrication and fitment of 01 cushioned recliner cum seating arrangement 03 seater for patient comfort with integration of iv fluid administration stand. , installation of sun protection blinds 01 no. air cooling unit 02 tonnage cooling capacity for conducive temperature maintenance. , installation of 01 in no. patient inspection bed-table integrated with iv drip stand along with three fold hospital curtain-partition screen 01 no. , installation and fitment of working table-extension of water proof slab integrated with overhead wall cabinet for emergency kit. dimension- 4x2x1.5 feet. , installation and fitment of washing area integrated with deep size ss sink with dual tap fitted with 01 in no. hot and cold water dispensing unit and packing of suitable hospital receptacles 02 no. , movable stretcher bed with inbuilt fluid infusion stand for swift shifting of patient. , fabrication and installation of 04 in no. medicine storage rack of 6x2x10 feet with drawers and bins. , fitment of 01 in no. rack and bin system 10x6x0.5 feet for day to day use of medicine, bandages, cottons and other medical utilities including overhead cabinets 2x5x1.5 feet. , installation of 01 refrigeration unit 300 litres double door for safe stowage of critical medicine-injection , installation of 01 in no. indoor temperature cooling unit of 1.5 tonnage cooling capacity with integration of existing electrical infrastructure for preservation and prevention of damage to medicine. , fabrication and installation of medicine distribution counter cum workstation of size 11x3x6 feet, , fitment of 02 in no. window blinds sun protection blinds of 6 square feet. , fabrication and installation of 02 in no. 6x2x6 ms rack and key arrangement. , fabrication and fitment of stowage facility- cage for securing of back up oxygen cylinders. , provisioning of 01 in no. double door shelve 7x3 feet with multiple racks for safe keeping of hospital linens and necessities including stowage facility for dues in medical apparatus. , installation and fitment of 04 nos exhaust system.

Feeder Line Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector