Latest fencing mesh Tenders | Government fencing mesh Tenders

CTN :41777012

22 Sep, 2025 NA

Jalaun - Uttar Pradesh

Tender For gi wire mesh fencing work from the main entrance to the entrance of the premises under the project of construction of new mahoi pump canal (capacity 10 cusecs) in tehsil madhogarh of district jalaun. (as per bill of quantity)

CTN :41465658

12 Sep, 2025 NA

Pithoragarh - Uttarakhand

Tender For bid to ras supply of security fencing d d - galvanised ms angle , gi chain link , galvanised ms angle gate , barbed wire , installation

State Government

CTN :41782919

24 Sep, 2025 7.63 Lacs

Sagar - Madhya Pradesh

Tender For gi chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 4 mm dia wire or nuts bolts and washers as required complete work of the block sagar of distt sagar

corporations/Associations/Others

CTN :41516898

15 Sep, 2025 NA

Mirzapur - Uttar Pradesh

Tender For corrigendum : supply of de-centralized materials and works for increasing capacity and installation of tf under business plan 2025-26, edd-kachhawa - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, x-arms holding clamps with bolts & nuts, f-bracket with bolts & nuts, top, dropper channel clamp with bolts & nuts for st pole, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, p.g clamps for weasel conductor, danger board with clamp & bolts, dead end clamp for pole/bracket with nuts & bolts, eye- hook, suspension clamp with nuts & bolts, j hook, all. binding wire 6 mm, 1x35 sq mm ac cable (xlpe), three phase distribution box, three phase distribution box clamp (ls), e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 120 mm2, all lugs 70 mm2, stay clamp with nut & bolts for st pole, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., st poles 11 mtr long, pcc poles 8.5 mtr long, all line materials with acsr weasel conductor, arial bunch cable 3x50+1x35+1x16 mm2, arial bunch cable 3x95+1x70+1x16 mm2, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of single support st/pcc pole for construction of 11 kv/lt line including digging of pit, fitting of all accessories, back filling of earth & others required work as per resspo norms., grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per resspo norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), earthing of poles as per resspo norms, stringing & sagging of 3 phase 11 kv line upto proper sag including laying of acsr weasel conductor, binding with insulators & jumpering as per resspo norms, laying, streaching of arial bunch cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per resspo norms, erection of sectional double pole structure of st pole for distribution t/f, including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm wi

CTN :41632227

10 Sep, 2025 9.29 Lacs

Bhadrak - Odisha

Tender For supplying all materials, labour, tandp for power supply to rwss point including 3ph3w 11 kv line with 55mm2 aaac and installation of 1 no 25 kva 11/0.4 kv s/s transformer etc for rpws point to village singada under bhadrak block - 11 mtr long 330kg psc pole, 11 kv v cross arm, back clamp for v cross arm (11 kv), 11 kv "f" clamp, 11 kv pin insulator (polymer), 11 kv hw fitting (t & c ) 45 kn, 11kv disc insulator (t&c) 45 kn polymer, pressure channel 100*50*6mm ms channel each 2.8mtr long (9.2 kg per mtr) * 2 nos, ab switch & hg fuse, mounting channel 75*40*6 each 2.8mtr long 4 nos (6.8kg per mtr) with side angle, transformer belting angle 50*50*6mm 2.8mtr long 2 nos (4.5 kg per mtr) with side angle, fish plate 50x5 mm,2.36kg/mtr,each 0.280 mtr length, 6 nos required=(6x2.36x0.280), ab switch (11 kv ,200 a. 3 pole.50hz), hg fuse (11 kv .200 a. 3 pole.) pi, lightning arrester (9 kv,10ka) station class, earthing materials, ht stay set (complete), ht stay insulator, ht stay clamp, 7/10 swg stay wire, gi pipe earthing 40mm dia medium gage 3 mtr long, no 6/8 gi wire(dia4.6mm), 25x6mm gi flat for neutral earthing, 55 mm2 insulated conductor, 55 mm2 insulated conductor, pg clamp for 100mm2 aaa conductor, gi nut, bolt & washer of different size, earthing of support (coil type), danger plate, anti climbing device made of gi barbed wire, clamping arrangement etc. (2 kg per support), 25 kva, 11/0.4 kv (ai) bis energy level-ii, lt distribution box including kit kat fuse with mccb for 25 kva s/s, all cable socket 120 mm sq, materials cost for concreting of 11mtr psc pole (2.13mtr x 0.40mtr = 0.0.29 cum pcc 1:3:6), materials cost for concreting of stay (1.65mtr x 0.3mtr x 0.3mtr= 0.150 cum pcc 1:3:6), sub station fencing with metal spreading, erection charges for psc pole, erection charges for joist pole & dtr, erection charges of other items

corporations/Associations/Others

CTN :41676845

10 Sep, 2025 3.20 Lacs

Delhi - Delhi

Tender For supply of pvc perimeter fencing in division-ii - supply of wooden batten 1.5" to 2.5" thick, 3 ht. , treated with antitermite and coloured with green colour.( variation up to 2% allowed in specification ) including gst, supply of pvc perimeter fence, green colour 25mm box size hexogonal shape 1.20 meters ht. (101 bandal x 25 mtr each bandal = 2525 meter), supply of g.i. binding wire 18 gauge (including gst)

State Government

CTN :41688164

17 Sep, 2025 NA

Gurgaon - Haryana

Tender For supply & installation of gi angle iron fencing post with barbed wire and concertina coil, and civil miscellaneous repair work at boundary wall, mdi gurgaon campus

State Government

CTN :41686495

15 Sep, 2025 NA

Ernakulam - Kerala

Tender For providing gi chain link fencing and ss railing for cusat medical centre for restricting the entry of stray dogs and providing gi wire fencing between the guest house and the international hostel, urgent petty works in international hostel at thrikkakara campus

CTN :41587309

16 Sep, 2025 5.49 Crore

Gorakhpur - Uttar Pradesh

Tender For supply of supply and fixing of odop cfc plant and machinery for wooden furniture d d - air compressor stand machine , high speed beam saw with optimization software , single sided high seed auto edge bander pre , hydraulic cold press - 50ton and 2 cylinders , triple head multi boring 21x3 - 63 spindles , cnc router- working area 1300 mm x 2500 mm , panel saw 3200x410mm - 7.5hp motor , semi-auto curvilinear edge bander 0.5-2mm , dust collector 7.5hp double bag heavy duty , dust collector 5hp double bag heavy duty , dust collector 3hp double bag , 250 kva transformer level-02 , st pole 11 mtr. long , acsr weasel conductor , gi pipe , 11 kv pin insulator with pin , 11 kv pin insulator with fitting , v type 11 kv x arm , earthing complete , 11 kv 3x70 sqmm cable uppcl approved make , cable joining kit 3x70 sqmm uppcl approved make , 11 kv tpmo fixing with all material , stay complete , t-off channel , top channel , cu. z clamp , f-bracket , droper angle , clamp for top droper x-arm and t-off and cable support clamp , nut bolt of different size , erecion of double pole structure on st pole 11 mtr , laying of 3x70 sqmm xlpe cable with gi pipe , erection of single st pole 11 mtr , erection of earthing of pole with g.i. wire and rod , chemical earthing of 250 kva distrution transformer , making of 11 kv xlpe indoor kit and outdoor kits in taping of cable providing fixinging and crimping of proper size good quality lugs , painting of pole by double coating aluminum and red oxide paint , fabrication errection commissioning and testing of 250 kva , construction of t or f plinth of size 2x2x1.2 mtr , grill fencing of 11 or 0.4 kv , 500 cft-i and c - seasoning kiln steam heated , 500 cft-i and c - installation and commissiong charges , wk-610 20 hp 15hp 3hp 1 or 2h - auto double surface planer , wr-20 15hp 2hp - straight line rip saw , cc-06-08-hydraulic - hydraulic clamp carrier , an-030-5 mtr- auto glue spreader , hs-625ts - tilting spindle shaper 7.5hp , fsm-520at - four side moulder with five , yr-750 - sliding head router , yrt-115 - rectangular tenoner , yom-120 - oscillation mortiser , hcs-18-w or all optionspneumatic cross cut off saw , dt-1136 - automatic copy shaper , gs-6213-with frequency control - double face glue spreader , pr-52nda - spiral cutter head planer sander , cdt-3155a - cnc dovetail tenoner , servokon make 100 kva 250- 480 or 400v 3 phase digital micro , civil work for seasoning plant , genset 160 kva //bid details 2 / 46

Fencing Mesh Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government