Latest ferro cement box Tenders | Government ferro cement box Tenders

State Government

CTN :39599108

17 Mar, 2025 NA

Delhi - Delhi

Tender For supply of precast concrete manhole cover and frame (v2) conforming to is 12592

State Government

CTN :39599180

17 Mar, 2025 NA

Delhi - Delhi

Tender For supply of precast concrete manhole cover and frame (v2) conforming to is 12592

CTN :39581288

20 Mar, 2025 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - portland cementqnt, dry distemperqnt, plastic emulsion paintqnt, coarse sandqnt, water proofing materialsqnt, pvc edge beadingqnt, display board qnt, plasticizer super plasticizer qnt, binding wire qnt, c i manhole cover with frame qnt, table moulded bricks of class designation 50 qnt, border tiles 30 x qnt0 cms qnt, m s rods qnt, polyenthylene water storage tank of specified capacity l qnt, glazed tiles 300x450 qnt, alluminium handles qnt5 mm qnt, alluminium tower bolt 20 cm qnt, aluminium window frame section qnt 20 mm thick qnt, bond stone 20 x 20 x 45 cm qnt, boulders qnt, brass stop cock qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate 40 mm size qnt, burnt bricks class 35 qnt, cp brass chain with plug qnt, cp brass waste 32 mm of standard pattern qnt, casurina poles qnt00 qnt50mm qnt, casurina poles 75 qnt00mm dia, ceramic tiles of size qnt 30 x 30 cms, chrominum plated screws qnt, cleat angles qnt, corbon electrodes qnt, enamel metal paint qnt, granite metal 20 mm qnt, granite metal 40 mm qnt, granite trap broken metal qnt00 mm and down size qnt, honne wood qnt, honnewood planks for panels 20 mm thick qnt, jungle wood runners and planks qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, mangalore tiles first class and special tile for ridges and hips qnt, mathi nandi wood planks for panels 25 mm thick qnt, nylon rollers qnt, ready mix primer paint ready mix red lead paint qnt, rubber beading for shutters beading qnt, silver oak or equivalent planks 38 mm thick qnt, size stone 20 x 20 x 25 cms qnt, tmt bars fe 500 qnt, whitening qnt, mr9609 add qnt, c i m s brackets for flushing cistern qnt, brick bats 25 to qnt00 mm qnt, unit cost as per the specification qnt, ms flat qnt, bolts and nuts qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, anchor bolts 750mm qnt, base plate base plate qnt, brick bats 25 to qnt00 mm qntqnt, copper plated brass piller tap qnt5mm qnt, gusset plates 6 mm thick qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, vitrified tiles 600x600 mm qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, indian type water closet of size 580 mm of specified make with footrests qnt, cost of 6 5mm m s coil qnt, fabrication charges qnt , pvc pipe of 4kgs cum 63mm qnt, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, ser1 handling loading and unloading 3 on material ser1, ser1 fabricator ser1, ser1 fitter class i ser1, ser1 welder grade i ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 add cutting and other wastage 5 ser1, ser2 add handling loading and unloading at 1 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add hom of welding and grinding machine 4 on material ser2, ser1 add providing and removing scaffolding at 3 on labour ser1, ser1 add sundries charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add watering charges at 1 on material ser1, ser2 add watering charges at 2 on material ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 transportation charges of materials beyond 5 km10 ser2, ser1 labour charges for handing errection of rcc rings etc ser1, ser1 stone chistler class ii ser1, ser1 painter class i ser1, ser1 mason class ii with tools ser1, ser1 mason class i with tools ser1, ser1 hom of cutting and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of welding and grinding machine ser1, ser1 mixer concrete small used in culvert ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 licenced plumber with tools ser1, qnt50 mm thick plain glass

CTN :39585928

10 Mar, 2025 NA

Sundergarh - Odisha

Tender For tender for calibration of instrument- g.i frame sieve 45 em dia 125 mm , g.i frame sieve 45 em dia 100 mm , g.i frame sieve 45 em dia 90 mm , g.i frame sieve 45 em dia 80 mm , g.i frame sieve 45 em dia 75 mm , g.i frame sieve 45 em dia 63 mm , g.i frame sieve 45 em dia 53 mm , g.i frame sieve 45 em dia 50 mm , g.i frame sieve 45 em dia 45 mm , g.i frame sieve 45 em dia 40 mm , g.i frame sieve 45 em dia 22.4 mm , g.i frame sieve 45 em dia 11.2 mm , g.i frame sieve 30 em dia 40 mm , g.i frame sieve 30 em dia 20 mm , g.i frame sieve 30 em' dia 10 mm , g.i frame sieve 30 em dia 4.75 mm , brass frame sieve 20 em dia 4.75 mm , brass frame sieve 20 em dia 2.36 mm , brass frame sieve 20 cm dia 1.18 mm , brass frame sieve 20 cm dia 600 micron , brass frame sieve 20 cm dia 300 micron , brass frame sieve 20 cm dia 150 micron , brass frame sieve 20 cm dia 90 micron , brass frame sieve 20 cm dia 75 micron , electronic weighing balance 10 kg capacity , digital balance make contact 20 kg capacity , digital balance make contact 50 kg capacity , measuring cylinder 50 ml capacity(glass) , measuring cylinder plastic 100ml capacity , measuring cylinder 250ml capacity(glass) , measuring cylinder plastic 500 ml capacity , slump test apparatus with testing rod , concrete hammer test with nccbm calibrated , mould cast iron 150 mm cube , core cutter 4" with dolly hammer , rapid moisture meter , ph meter digital, 4-14ph , vicat needle apparatus lsi marked , le-chatelier mould as per is (set of 6) , ctm - 2000 kn (digital) , aggregate impact testing with blow counter , flakiness gauge lsi marked , elongation gauge lsi marked , bitumen extractor hand operated , field density test apparatus sand replacement method , bulk density cylindrical metal measures

State Government

CTN :39557685

25 Mar, 2025 45.00 Lacs

Rajkot - Gujarat

Tender For supplying and stacking various type of building, road & otherconstruction meterials, at various places of taluka jetpur under talukapanchayat, jetpur under mgnrega( annual unit rate) - hirechargesofconcretemixer0.25to0.40cumwith hopper, vibrator(needletype40mm), surface vibrator, watertanker5000ltr.capacity, white washer, brick aggregate (single size): 40mm nominalsize, stone aggregate (single size): 63mm nominal size, stone aggregate (single size): 50mm nominal size, stone aggregate (single size):40mm nominal size, stone aggregate (single size):20mm nominal size, stone aggregate (single size):12.5mm nominal size, stone aggregate (single size):10mm nominal size, stone aggregate (single size):06mm nominal size, brick bats, wire brush, soft brush, portland cement, white cement, cementconcretejali50mmthick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, marble dust/powder, moorum, dry distemper, oil bound washable distemper/acrylic distemper, cement primer, distemper primer, enamel paint, plastic emulsion paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), mild steel round bar 12mm dia and below, mild steel round bar above 12mm dia, galvanised steel j or l hooks 8mm dia, galvanised steel barbed wire, glass strip 4mm thick 40mm deep, stone for masonry work, stone dust, g.i. limpet washer, g.i. plain washer thick, hard drawn steel wire, 18mm thick flamed finish granite stone slab, c.i. cover and frame 300x300 mm inside, c.i. cover without frame 300x300mm inside, r.c.c.pipesnp2class150mmdia, r.c.c.pipesnp2class250mmdia, r.c.c.pipesnp2class300mmdia, r.c.c.pipesnp2class450mmdia

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

CTN :39546592

03 Apr, 2025 10.00 Lacs

Rewa - Madhya Pradesh

Tender For rate contract for supply of lok nirman items - dhoka size 6*6*6, dhoka size 6*6*8, dhoka size 8*8*8, dhoka size 8*8*12, dhoka size 12*12*12, sand khajuraho, sand son, sand local, brick local 22*9*7 cm., brick chimney 22*9*7 cm., over size metal 90 to 63 mm., ballast crusher 40 mm., ballast crusher 20 mm., ballast crusher 12 mm., ballast crusher 10 mm., crusher dust, ballast local (hand broken) 40 mm., binding wire, door with iron frame, skylight, window iron complete, angle iron (50x50x5), slab sill 4 inch thick, slab 40 inch thick, wooden frame and for use, shuttering shuttering, shuttering wood complete with fitting (including lever charge), cement 53 grade opc, cement 43 grade opc, lime wet and dry, lime dust, distemper (with lever and material), paint (with lever and material), primer (with lever and material), brush painting in all sizes, cgs roof sheet (80 mm), pipe plastic (pvc slot) 15 mm, pipe plastic (pvc sheet) 30mm, murum, water proof powder, road roller hire driver diesel incl., hume pipe 300mm (2.5m long) np2class providing and laying, hume pipe 450mm (2.5m long) np3class providing and laying, hume pipe 600mm (2.5m long) np4class. providing and laying, g.s.b. (with labour and material), d.l.c. (with labour and material), c.r.m. (with labour and material), cement brick (fly ash), cement pipe 3 inch (2.5 m. long), cement pipe 5 inch (2.5 m. long), concrete mixer on hire (with diesel), plate vibrator on hire (with diesel), needle vibrator on hire (with diesel), rebar 6mm,, rebar 8mm,, rebar 10mm,, rebar 12mm,, rebar 16mm,, rebar 20mm, white cement, profile sheet, wall tiles (with level and material), floor tiles (with level and material), paver block 60mm m-30 grid (with leveler & material), paver block 80mm m-30 grid (with lever & material), concrete work m-10 (with lever & material), concrete work m-20 (with lever & material), wall putty (with lever & material), dismantling brick work, dismantling m-10 concrete, dismantling m-20 concrete, plywood door thick, soil, pvc wall paper (sticker), pvc pipe 6 inch, pvc pipe inch, hdpe pipe inch, hdpe pipe inch, hdpe pipe inch, uv stabilised fiber glass rainforced plastic sheet rwf, wall writing oil paint (labour & material)

corporations/Associations/Others

CTN :39418209

24 Mar, 2025 2.90 Crore

Ahmedabad - Gujarat

Tender For corrigendum : supplying & installing nabl approved equipments for civil worktesting at piplaj hotmix plant for ahmedabad muncipal corporation.(amc) - electronic weighing balance -30 kg-1 gm, precision electronic balance-500 gm-0.01 gm (10 mg)-auto calibration, electronic weighing balance -5 kg-0.5 gm (500 mg), electronic platform balance-300 kg-50 gm-platform size 600 x 600 mm, high precision electronic balance -100 gm-0.001 gm (1 mg)- external calibration, water testing kit - hardness, water testing kit- sulphates, water testing kit chlorides, coarse sieves - 45 cm dia-g.i.-100.00 mm, fine sieve - 20cm dia-brass-10 mm, sieve shaker-gyratory-for 20/30 & 45cm dia sieves with digitaltimer, hot air oven-digital-45x45x45 cm-250c-inner s.s. chamber, liquid limit device - motorisedas per is : 2720 (partv) with revolution counter and grooving tools., pipette borosilicate glass - 1 ml, measuring cylinder - borosilicate glass - "0" bottom - 100 ml., water still-(ss 304)-(compact )-4 ltr/hour, compact cbr load frame-electrical-single speed, non nuclear density gauge (soil), rapid moisture meter-0 - 25 percentage with pressure gauge, standard penetration test apparatus with accessories - motorised, digital constant temp. waterbath for marshal test -6 moulds-100 mm, bitumen extractor - motorised with variable speed with digital rpm indicator with ac motor and drive, automatic compactor for marshal test - 4" dia specimen, unconfined compression tester-digital (marshal), ductility testing machine - digital temp control - refrigerated - is 1208, ring and ball apparatus-(programmable)-(digital)-(astm d36) with accessories, thin film oven - as per is 9382 as per is:9382., sand equivalent value test apparatus with accessories, sand equivalent mechanical shaker - motorized (astm d2419) with digital rpm indicator and digital timer, standard penetrometer for bitumen - automatic digital timer - dial gauge as per is 1203, is 1448. astm d5., saybolt viscometer - with digital controller and motorised stirrer - astm d88, pensky marten flash point apparatus-digital with motorised stirrer, asphalt content oven-(asphalt ignition oven)-(astm d6307), planetary mixer-for bituminous mix-digital- 20 ltrs, hardness tester for bitumen mastic asphalt with accessories, infrared thermometer - (-50c to 500 c), digital thermometer-(dtm 100)-300c-(cr/al (k))- with 12" long temp.probe, round hot plate-c.i. top-digital-20 cm, compression testing machine - 2000 kn-automatic pace rate controlled, compression testing machine - 2000 kn-digital - manual pacecontrol- auto calculation, cube mould-15 cm-isi marked u is:10086., concrete permeability tester - as per din 1048 - 3 cell - with air compressor, laboratory needle vibrato include 25mm needle with 6 meter long rubber shaft, laboratory concrete mixer-tilting drum type, vibrating table-100 x 100 cm, aggregate impact testing machine with blow counter, flow table (cement)-motorised - 25cm dia - m.s. top - is 5512, air entrainment meter - 0.005 cubic mtr - is: 1199 with accessories, los angeles abrasion testing machine - with presettable digital counter, riffle sample divider - g.i. 25mm - no. of slot : 16, electronic weighing balance -30 kg-1 gm, precision electronic balance-500 gm-0.01 gm (10 mg)-auto calibration, electronic weighing balance -5 kg-0.5 gm (500 mg), electronic platform balance-300 kg-50 gm-platform size 600 x 600 mm, high precision electronic balance -100 gm-0.001 gm (1 mg)- external calibration, water testing kit - hardness, water testing kit- sulphates, water testing kit chlorides, coarse sieves - 45 cm dia-g.i.-100.00 mm, fine sieve - 20cm dia-brass-10 mm, sieve shaker-gyratory-for 20/30 & 45cm dia sieves with digitaltimer, hot air oven-digital-45x45x45 cm-250c-inner s.s. chamber, liquid limit device - motorisedas per is : 2720 (partv) with revolution counter and grooving tools., pipette borosilicate glass - 1 ml, measuring cylinder - borosilicate glass - "0" bottom - 100 ml., water still-(ss 3

CTN :39447836

06 Mar, 2025 NA

Delhi - Delhi

Tender For corrigendum : supply of precast concrete manhole cover and frame (v2) conforming to is 12592,precast concrete manhole cover and frame (v2) conforming to is 12592,precast concrete manhole cover and frame (v2) conforming to is 12592,precast concrete manhole cover and frame (v2) conforming to is 12592,precast concrete manhole cover and frame (v2) conforming to is 12592

State Government

CTN :39534432

10 Mar, 2025 2.22 Lacs

Bolpur - West Bengal

Tender For construction of steel structure openable covered frame over existing drain with side concrete for frame fixed from h/o (i) in front of bubai house vi) beside of santanu mukherjee to subrata das at suripara in ward no-20 under bolpur municipality.

Ferro Cement Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector

corporations/Associations/Others

State Government