Latest ferro cement slab Tenders | Government ferro cement slab Tenders

corporations/Associations/Others

CTN :40579479

10 Jun, 2025 NA

Sirsi - Karnataka

Tender For auction sale of ms scrap-i rcc pole skeleton,ms scrap-ii ms scrap (rails /i beam),empty barrel,25kva,50kva,63kva,100kva and 250kva al winding distribution tran without oil

CTN :40555456

09 Jun, 2025 8.50 Lacs

Dharwad - Karnataka

Tender For supplying of construction material for garag sanjeevini shed in dharwad taluk - supply of formwork for beam, supply of formwork, centering & scaffolding for lintel, supply of formwork, centering & scaffolding for slab, supply of formwork, centering & scaffolding for columns, supply of vitrified tiles for flooring 60x60, supply of 1st quality glazed wall tiles, supply of white cement based putty, supply of superplasticizer, supply of concrete mixer capacity of 1cum, supply of ceramic tiles, supply of water storage tank, supply of upvc pipes 25mm nominal dia, supplying of white viterious china orissa pattern w.c pan 580 x 440 mm, supplying of pvc pipe 10 kg/sqm 90mm dia, supplying of rcc display board, supplying of needle vibrator including operation and maintenance, supplying brush, butti, roller, sand paper, supplying of scaffolding, supplying of electrical material, supply of broken stone aggregate 40mm, supply of broken stone aggregate 20mm, supply of m-sand, supply of opc cement 43 grade, supply of size stone 20x20x23, supply of stone boulder 300mm, supply of burnt bricks, supply of tmt steel bard fe 550, supply of binding wire 18 guage, supply of matthi or nandi wood for frame & shutter, providing and fixing brass bib stop cock of approved quality 20mm nominal bore, supply of solid concrete block of 150mm thick, supply of broken stone aggregate 10mm size, supply of plastic emulsion paint (acrylic), supply of synthetic enamel paint for ms steel work

CTN :40563359

05 Jun, 2025 5.77 Crore

Jhanjharpur - Bihar

Tender For state scheme (nabard)/25-26/jhanjharpur/01 - 1) construction of hl rcc bridge in karhara to malleh road over bhutia balan river-ch-2.10 km, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in sub structure with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :-- furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concrete approach slab including

CTN :40563355

05 Jun, 2025 8.19 Crore

Tikari - Bihar

Tender For state scheme (nabard) /25-26/tikari /01 - 1) name of work: construction of high level rcc bridge over morahar river in between mahiyarpur to kurmawaan, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach s

CTN :40544263

13 Jun, 2025 12.99 Lacs

Kozhikode - Kerala

Tender For ferro/cement ring of internal diameter 0.7 m, thickness 2.5 cm and height 0.5 m placed over a circular ferro cement slab of dia 0.75m and thickness 2.5 cm. the ring will have a hole of dia 2.5cm at the bottom for the leachate to flow out

CTN :40522831

18 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of surface dressing n exc 15 cm deepin hard oblique dense soil , excavating over areas not exceeding 1 point 5 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 1 point 5 m deep not exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed. , returning filling in including spreading and levelling and watering and well ramming in layers not exceeding 25 cm each , removing excavated material n exc 50m and depositing where directed at a level n exc 1 point 5 m above the starting point , m and l for hard core of gauge n exc 63 mm and deposeted and spread and levelled in layers n exc 15 cm thick and watered and rammed to a true surface complete all as specified and as directed , m and l cement concrete in fdn and 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate in sub base of flooring complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 20 mm graded aggregate complete all as specified and as directed , m and l for rcc m30 reinforced cement concete design mix in foundation including rafts and footing and foundation beams and bases for column and etc basement slabs under reamed piles , m and l for mild steel tmt bar 10 mm dia and over cut to length and bent to shape required , m and l for mild steel tmt bar 8 mmn dia and overm cut to length and bent to shape required , m and l formwork to sides of rough finished flat surface of concrete foundations and footings and bases of colums and raft and raft beams and sides and sffits , m and l formwork to rough finished flat surface soffits of suspended slabs such as roof slabs and floor slabs and landing and similar work not exceeding 200mm thick horizontal or sloping all , m and l formwork to rough finished flat surface in sides and soffits of floor or roof beams and beam haunchings and girders and bressummers , formwork to faces of walls and retaining walls and butments and parapets and staircase railings and similar work including attached pillasters and buttresses , m and l formwork to edges of rough finished surfaces of concrete flats and trends and breaks in floors windows cills and concrete railing and openings in concrete walls and floor and roofs , m and l liquid water proofing compund , m and l for verified ceramic wall tiles light shade 10 mm thick square oblique rectangular polished and area of each tiles not exceeding zero point 36 sqm and in floors , m and l for verified ceramic non skid tiles light shade 10 mm thick square rectangular polished and area of each tiles not exceeding zero point 36 sqm , m and l for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed , m and l rendering 15 mm thick on wall on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick on ceiling on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick in on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed , m and l for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion , m and l for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed , s and f anodised aluminium window and ventilator shutters and side hung type without sash bars and al

CTN :40486071

05 Jun, 2025 2.27 Crore

Kullu - Himachal Pradesh

Tender For 2. construction of 22.00 meter single span rcc t-beam bridge over mooring nallah at km. 10/445 on link road main road to bhilali trilokinath lobber udaipur road km. 0/000 to 13/970 under pmgsy-iii batch-i package no.hp-07-158 c.

State Government

CTN :40487693

17 Jun, 2025 7.02 Lacs

Ranaghat - West Bengal

Tender For construction of 56.00 mtr long boundary wall (2.5m panel) having 200x200 mm r.c.c. column footing (1.0x1.0 m) with 125mm thick brick panel wall and 200x300 mm tie beam at gl including m.s gate at fulia zone-ii, pump house no-iv under ranaghat sub-div

State Government

CTN :40487703

17 Jun, 2025 5.42 Lacs

Ranaghat - West Bengal

Tender For construction of 66.00 mtr long boundary wall (2.5m panel) having 200x200 mm r.c.c. column footing (1.0x1.0 m) with 125 mm thick brick panel wall and 200x300 mm tie beam at gl including m.s gate at gazna w/s, pump house-ii under ranaghat sub-div, phe

State Government

CTN :40487699

17 Jun, 2025 5.35 Lacs

Kalyani - West Bengal

Tender For construction of 55.95m boundary wall (2.5m panel) having 200x200mm r.c.c. column footing (1.0x1.0m) with 125mm thick brick panel wall and 200x300 rcc beam at gl including m.s gate at hudachapra pwss ph-2 site.

Ferro Cement Slab Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government