Latest ferro cement Tenders | Government ferro cement Tenders

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

CTN :39382026

24 Feb, 2025 1.87 Lacs

Rajmahal - Jharkhand

Tender For cleaning & finishing walls with water proofing cement paint from hydraulic section to ne yard gate under rocp.

CTN :39396716

25 Feb, 2025 85.1 Thousand

Jalore - Rajasthan

Tender For finishing walls with acrylic smooth exterior paint (asian paints, nerolac or birla) of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10sqm over and including base coat of water proofing cement paint applied

CTN :39053708

21 Feb, 2025 NA

Sonitpur - Assam

Tender For bid to ras tender for supply of supply of combined toilet bathroom ctb 7 point 32m x 7 point 10m x 4 point 40m height as per ce hq 4 corps drawing no ce 4 corps oblique puf oblique ctb 7 point 32m 2017 18 sheet no 1 oblique 4 to 4 oblique 4 , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold oblique ambuja oblique ultratech oblique jk oblique dalmia oblique acc , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40 to 63 mm graded , stone for rr masonary less than 6 inch , mild steel bar of size 6 to 8 mm dia conform to is 432 part 1 1982 make tata or sail or jsw , mild steel bar of size 10 mm dia and above conforming to is 432 part 1 1982 make tata or sail or jsw , water proofing compound conforming to is 2645 2003 make pidilite or dr fixit or fevicol , bricks sub class b , brick bats , pvc pipe 110 mm dia 3 mtr long make prince or finolex or supreme , pvc pipe 75 mm dia 3 mtr long make prince or finolex or supreme , pvc cowl 75 mm dia make prince or finolex or supreme , ms binding wire , pvc socket 110 mm make prince or finolex or supreme , pvc bend 110 mm dia make prince or finolex or supreme , water storage tank triple layer 1000 ltrs confirming to is 12701 1996 make sintex or ultrapure aqua or polywell , fabrication from structural steel section for staging of water storage tank made of capacity 500 or 1000 ltrs made out of ms angle iron frame of size 50 x 50 x 6mm thick with height of 4 point 0 mtr above ground level and 0 point 6 mtr below ground level embeded in pcc 1 ratio 2 ratio 4 of 20mm graded agg below the ground level the inner bracing of staging should be fixed with 40 x 40 x 5mm ms angle iron fixed with suitable size ms plate of 3mm thick and at top of the staging 1 point 2m x 1 point 2m x 3mm for placing the pvc tank and anchored with ms angle iron frame of size 25 x 25 x 5 mm thick with ht of 0 point 80 mtr from the bottom of base plate of tank incl ladder complete with two coats of metal painting over one coat of primer make of angle iron tata or sail or jsw , iwc of vitreous china squatting pan orissa pattern of size 580mmx440mm dark coloured with p or s trap make parryware or hindware or cera incl connection to trap and to flushing pipe etc and incl provn of cement conc bedding copmplete in all respects , wc european type model 2008 ewc and combi flush pvc flushing cistern of 10 ltr capacity make cera or equivalent models in hindware or parryware , flushing cistern pvc combi flush model 2603 of cera flushing cistern valve less symphonic action pipe flushing cistern low level white with in let ball valve float with handle of capacity 10 ltr incl brackets and flush pipe line complete in al respects make hindware or parryware or cera , looking mirror frameless of size 600x450x5mm with 4mm ply baking make prayag or saint gobin or modigaurd , brass chromium plated towel rail 600 mm long 20 mm dia with cloth hooks make ess ess or prayag or johnson suisse , chromium plated piller cock swan neck with aerator make ess ess or prayag or johnson suisse , stop cock l type chromium plated brass 15 mm make ess ess or prayag or johnson suisse , stop cock t type chromium plated brass 15 mm make ess ess or prayag or johnson suisse , bib cock long spout chrom plated 15 mm make ess ess or prayag or johnson suisse , pvc connection 45 cm long 15 mm make supreme or johnson suisse or famingo or kpt , peg set of four fitted with galvanised screws along the internal surface of the walls in the rooms make ess ess or prayag or johnson suisse , 2000 ltrs anaerobic frp septic tank of make sintex or ultra pure or approval shall be provided alongwith all associated accessories as ground oblique site requirement , ppr pipe 32 mm dia make sfmc or finolex or supreme , ppr pipe 20 mm dia make sfmc or finolex or supreme , ppr socket 32 mm make sfmc or finolex or supreme , ppr elbow 90 degree 32 mm make sfmc or finolex or supreme , ppr

CTN :39073217

21 Feb, 2025 NA

Panchkula - Haryana

Tender For bid to ras tender for supply of tubing gi 15 mm med grade isi marked , tubing gi 20 mm med grade isi marked , glass sheet clear 1200 mm x 1200 mm x 3 point 8mm , cement in 50 kg pack , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , pvc pipe 100 mm , helical door spring isi marked , glass sheet frosted 1200 mm x 1200 x 3 point 8 mm , m seal in 90 gms pkt , pvc pipe 75 mm , gi union 15 mm med grade isi marked , elbow gi 15 mm med grade isi marked , thread for plumber , glass sheet frosted 600 mm x 1200 mm x 3 point 8 mm , cp brass extension nipple 15 mm x 150 mm , handle pvc with float valve for pvc low level cistren , gypsum screw black 20 mm , gi clamp for gi pipe , gypsum black screw 25 mm , aluminium hasp and staple of size 100 mm , white cement in 1 kg pack , gypsum black screw 30 mm , gypsum screw black 40 mm , mortice lock isi marked for aluminium door , end plug gi 15 mm , rawal plug 35 x 8 mm , stone aggregate 20 mm well graded , sand confirming to zone 3 , tee equal gi 20 mm suitable for gi pipe isi marked , blade cutter iron , washer for cistern , hammer drill bit 40 oblique 8 , pedestal for wash basin , washer for taps , dr fixit for water proofing 1 kg each , painting brush 100 mm , painting brush 50 mm , welding rod , lime quick , plywood bwr 8 feet x 4 feet x 18 mm , pipe clips 3 oblique 4 inch , floor trap 3 oblique 4 inch , p trap 110 x 110 mm , medium density fibreboard mdf both side laminated teak face 2440 mm x 1220 mm x 19 mm , plywood teak face one side 2440 mm x 1220 mm x 12 mm , french polish , beeding teak wood 20 mm x 6 mm , peg hook brass , plywood teakface one side 2440 mm x 1220 mm x 4 mm , lock for almirah squre type 65 mm , touch wood , form cushion 530 x 550 x 100 mm with cover tepastry cloth , spirit base polish spirit incl lakh dana and sundras , magnetic catcher , sliding channel for furniture steel , handle cp for steel almirah as per sample , knob 40 mm brass , screw 50 mm black , screw 40mm black , nails wire 25 mm , screw 60mm black , nails 40 mm 17 oblique 19 no , fevicol sh 1kg pkt , paint synthetic enamelled white 1st quality pack of 4 ltr , paint synthetic enamelled black 1st quality 4 ltr pack , prelaminated board both side laminated 2440 mm x 1220 mm x 12 mm , paino hinges , ss handle d type 75 mm , mdf post forming pft board of size 900 mm x 450 mm x 18 mm , mdf post forming pft board of size 600 mm x 450 mm x 18 mm , mdf post forming pft board of size 1200 mm x 600 mm x 18 mm , plywood bwp 2400 mm x 1200 mm x 12 mm , round conevx mirror of diameter 80 cm made with flexiable polycarbonate front of 0 point 8 mm thickness reinforeced with plastic back of 3 mm thickness with 6 ft height and 50 mm diameter ms pole medium grade duly painted with two coats of synthetic enamel paint over a coat of red oxide primer , road marking paint water based white , road marking paint water based black , road marking paint water based green , road marking paint water based yellow , abs speed breaker h 50 w 350 l 250 , abs speed breaker h 75 w 500 l 425 , abs speed breaker h 50 w 380 l 500 , automatic star delta starter 60 hp , gi tubing 20 mm medium grade , ppr gate valve 20mm , glass sheet frosted 600 mm x 1200 x 3 point 8 mm , pre laminated particle board 8 feet x 4 feet x 12 mm , gi tubing 15 mm medium grade , gi tubing 25 mm medium grade , gi tee 15 mm , bitumen tarfelt 1 mtr wide x 20 mtr long , hack saw blade double edge , brass nozzle 20 mm for fountain , gi tubing 40 mm medium grade , aluminium inline connector 300 sqmm , gi tee 20 mm , mortice lock isi marked for aluminium door , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , gi nipple 15 mm dia 150 mm long , gi nipple 20 mm dia 150 mm long , aluminium inline connector 185 sqmm , gi elbow 20 mm , ppr pipe 32 mm , brass nozzle 15 mm for fountain , gi union 20 mm , insualtion tape self adhesive 20 mm x 25 mtr long , cement 43 grade 50 kg bag each , automatic star delta starter 12 point 5 hp , gi socket 20 mm , frame plate 12 modular ,

CTN :39370535

27 Feb, 2025 NA

Nandurbar - Maharashtra

Tender For providing of repair and overhauling service - wooden shape railling; na; no; buyer premises,repair and overhauling service - ferro cement wooden shape entery gate; na; no; buyer premises

Central Government/Public Sector

CTN :39321923

05 Mar, 2025 NA

Pratapgarh-Up - Uttar Pradesh

Tender For colour wash and repairing - removing dry or oil bound distemper water proofing cement paint and the like scrapping and papering and preparing the surface smooth including necessary repairs to scratches etc. complete work , providing and applying white cement based putty of average thickness 1mm of approved brand manufacturer over the plastered wall surface to prepare the surface even and smooth complete , distempering with bound washable distemper of approved brand and manufacturer to give an even shade , new work two or more coats over and including water thinnable priming coat with cement primer , painting with synthetic enamel paint approved brand and manufacturer of required colour to give an even shade one or more coats on old work

State Government

CTN :39284812

28 Feb, 2025 40.75 Lacs

Bhopal - Madhya Pradesh

Tender For plastering painting distempering water proofing cement painting in various residential buildings and roads of pwd. under pwd. city sub dn.no.2 bhopal.

Ferro Cement Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government