Get complete information related to latest Ferrous Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ferrous Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ferrous Item Tenders.
Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers, buffer casings with/without spindle, knuckles and coupler yoke for cbc,end shields,control arms,connecting rods, axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers,gear wheels of sizes ,screw couplings and its link parts, bearing cover casings,grease collors,tensioning rods,anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, full/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, huck bolts,huck bolt tails , ms plate cuttings, traction motor end shields, end locking screws ,bearing racers, locking plates, bearing adapters,valves of sorts and sizes , brake rigging components, ctrb bearings and its components, connecting rod assemblies, buffer plunger full assemblies , valve springs , buffer spindles, axle box covers, angle cut pieces , main bearing caps, connection straps, cam shaft parts, cut off angle cocks, bss hanger pins, pull rods,damper brackets,center pivot top and bottom parts,cbc couplers,compensating beams,bearing housings/axle box caps, transmission bars, right angle gear covers, cr tanks,traction motor components , vibration dampers, gate valves, isolating valves, ball joint traction lever,tm motor ip cores,cooler headers,roll links,traction centers, liner sleeves,air duct assemblies,brake headers, and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrousitems found, should be removed and returned to railways by the purchaser.
Tender For auction sale of rolling stock - lot no : 3132604006 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bobrn m1, boxnr . available on rails. 1) ser boxn m1 10079673692, 2) scr boxn m1 10099630576 3) cr boxnr 25019660533 ,4) er bobrn m1 72029661012 , 5) nr boxn m1 10039661080. location road no.4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributer valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock ofangle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bronze buishes ds8no:0999603006. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 42.199.mt (m.s -37.197, ss-5.002) sold by number basis only.05 nos, delivery in cut of parts on lot basis only. note:-if any non ferrousitems found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of rolling stock - lot no : 3132604007 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079639360 ,2) ser boxn m1 10079666168 3) special repair boxn m1 10069661050, 4) ser boxn m1 10079561883,5) nr bcn m1 30039062397. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers, 20.knuckle pin.21.knuckle thrower.22.bcn swing, 23.bcnflap ds8no:0999603007. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 47.174 (ms) .mt sold by number basis only.05 nos delivery in cut of parts on lot basis only. note:-if any non ferrousitems found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of rolling stock - lot no : 3132604008 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrap of cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , available on rails. 1) ser boxn m1 10079663785 ,2) scr boxn m1 10099660948 ,3) er bobrn m1 72029561756 ,4) ser boxn m1 10079661330,5) er boxnr 10029661076 location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support (1st plate),15. safety plate with anchor plate(2ndplate16.yoke suppor tplate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bronze buishes s8no:0999603008. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 45.732.mt (m.s-41.400, ss-4.332) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrousitems found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of rolling stock - lot no : 3132604009 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, boxn m1 , bcn m1 , boxnr ,available on rails. 1) special repair boxn m1 10069660152, 2) special repair bcn m1 30069004213 ,3) ser boxnr 25079661945 ,4) cr bcn m1 30019016389 ,5) er bcn m1 30029024992. location road no: 4 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. center pivots 7. casnub bogies with out all fittings with wheel sets, 8.break cylinder 355 9.auxilary resivour,10.dustributor valve 11.cp pb with control revioser 12.sab, 13.boxn doors, 14.yoke pin support(1stplate),15.safety plate with anchor plate(2ndplate16.yoke support plate(3rdplate),17.cock of angle cock.18.yoke pin,19)draft gear followers,20.knuckle pin.21.knuckle thrower.22.bcn swing,23.bcnflaps8no:0999603009. dt:.29.04.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 52.677.mt (m.s-48.272, ss-4.405) sold by number basis only 05 nos delivery in cut of parts on lot basis only. note:-if any non ferrousitems found in cutting/delivery, purchaser should be handed over to railways. 05 nos.
Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrousitems such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrousitems are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant 48 feet distance east-west direction along p.c.c road and 49 feet distance in north- south direction.
Tender For auction sale of others - lot consisting of spg dust.location:(1) receiving station scrap yard.(2) west of main receiving station road side.(3) south of main receiving station road side.note: (1) lot shall be delivered as is where is basis. (2) other loose ferrousitem and non ferrousitems are not permitted for delivery. (3) purchaser should arrange all lifting equipment like forklift, poclain, jcb, hydra etc to lift the spg dust while delivery. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela.
Tender For auction sale of others - lot consisting of foundry slag kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.location: in front of cooling tower 60 feet in east-west direction and 40 feet north-south direction.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2) loose ferrousitems such as wheel cuts, axle end cuts, risers, rail cuts pipes, angles, channels, rods, sheets etc. and non-ferrousitems are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy cutting of big pieces of slag beyond truck body size will be permitted to accommodate the same inside the truck. (5) the lot shall be delivered as is where is basis. (6) purchaser can inspect the materials thoroughly before e-auction. (7) delivery on actual weighment basis (8) loading shall be done by purchaser at his own cost. (9) prior delivery schedule shall be obtained by the purchaser from rwp/bela.
Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrousitems such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrousitems are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:back of steel melt shop, near peepal tree 62 feet north from east-west p.c.c road. east-west 59 feet and north-south distance 85 feet.
Tender For auction sale of others - lot consisting of slag cake kept all over the lot area with or without embedded ferrous and refractory items and with or without other material.note: (1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. loose ferrousitems such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrousitems are not permitted for delivery. collection of the material will be done from one end only as per delivery direction. (2) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks (3) oxy-cutting of big pieces of slag cake beyond truck body size will be permitted to accommodate the same inside the truck. (4) delivery on actual weighment basis (5) loading shall be done by purchaser at his own cost. (6) the purchaser can inspect the material on or before auction (7) prior delivery schedule shall be obtained by the purchaser from rwp/bela. location:in front of oxygen plant east-west 48 feet distance and 80 feet north-south along temporary road.