Get complete information related to latest Ferrules Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ferrules Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ferrules Tenders.
Tender For corrigendum : state plan - 2025-26 - survey and investigation - facilitation of pilot study on ferrule with flow control and non-return valve in kwas water distribution network in palakkad -supply and fixing 15 mm ferrules with flow control and non - return
Tender For supply of set of copper tublar in-line connectors [set of copper tublar in-line connectors (crimp ferrule) required for provision of 3 phase type contactor in wap-4 locomotive consists of (1) 25 sq mm copper tublar (crimp ferrule) in-line connectors ( length 25 mm ) for 3 phase type - 60 nos. (2) 2.5 sq mm end sealing insulated ferrules ( length 17 mm) heavy duty 2.5 sq mm - 70 nos. one set consists of 02 items 130 nos. (note: - material: copper etp grade as per is 191 part - v, surface: electro tinned).]
Tender For tender for supply of curtis make mosfet electronic motor speed controller-120424/36v, cable gland-size 1.25 cable gland-single compression, brass nickel plated (is-319) with sealing ring of natural rubber or neoprene standard thread with checknut for armour cable indoor use make comet, comex or equivalent, hummer h24pro jump starter battery for 24v+12v/4000a, vehicle 99900mwh, model: hummer h24pro make: general motors usa or equivalent, earthing cable 16 sqmm, alluminium conductor pvc insulated,, round bimetallic washer of al 80% & clu 20% by volume id 10 od 202 mm thk, round bimetallic washer of al 80% & cu 20% by volume id 12mm od24mm 2mmthk, distribution board made up of sheet steel material, ip42 protection, with incoming 3ph + n 63a isolator & outgoing 12 no (4 per phase) 1ph+ in, 20a, 30milliamp rcbo, completely pre wired, make: legrand, havelles, siemens or equivalent, as per latest bis standard, distribution board made up of sheet steel material, ip42 protection, with incoming 3ph +n 100a isolator & outgoing 3 no. (1 per phase) 3ph+in, 63a, 30milliamp rcbo, and 6 no. (2 per phase)1ph+in 20a, 30milliamp rcbo, completely pre-wired make: legrand, havell, siemens or eq, as per latest bis standard, ferrule 35mm2 dowel cat als-2 compression type aluminium, aluminium in-line connector [ferrule), size 50 mm2 compression type, dowell's cat.no. als-12, led type indication lamps 24v dc cut out size 16 mm red reflector, lock nut & washer with screw type wire termination altos make, led type indication lamps 24v dc cut out size 16 mm green reflector, lock nut & washer with screw type wire termination altos make , bldc ceiling fan, 28w +/-2w, 1200 mm, compatible with regulator, no of running position -5, (without remote), bee s star rated energy efficient, high air delivery 240 cmm with min 325 rpm, 3 years warrantee, color-white, copper winding, min pf 0.9, double ball bearing, class of insulation "b", lenghth of down rod-300-350mm, shackle thickness min.2mm, marking of each ceiling fan-as per c1.8.1 of 15:374:2019 latest with all accessories, 230v, 50 hz, with test report from-lab/nabl/ilac make-atomberg, orient or equivalent., intelligent photo electric smoke detector with base, spe-operating voltage: loop 24v, standby current $ 0.8ma, alarm current 5.0ma, 1 & 3: loop connection (polarity-insensitive), 2: positive terminal of remote indicator, 4: negetive terminal of remote indicator, refer to installation and operation mannual 30304603 for details of specification and installation, etc. standard: en54-7, product no. 10102913, make-gst or equi suitable for gst make control panel, pvc casing caping size1 each strip of 2 mtr. long, make prestoplast or equivalent, as per latest bis standard, rcbo,230 vac, 2p,2 module, 20 amp, 30ma l & t, abb, legrand or equivalent, pvc insulated 40*2.5 sqmm flexible cable pvc sheathed as per is 694-1990 with is mark, 1100 voltage grade bright annealed bare copper conductor, colour of outer sheath red, blue, yellow, green, roll length: 100 meters, isi mark, rcf shall be markrd at every meter along the length, make polycab, miracal or equivalent, led based outdoor type streetlight fittings:, wattage: 120w +/-5w supply. voltage: 230v ac, 50hz, ip65, lumen: min 90lumen/watt temperature range: 00-6500k, cri-min 70, 4kv surge protected lmbo certified, crompton/baiai/equivalent make, led based industrial high bay light fixture; wattage 120+/-2w supply voltage 90 to 270v ac with technical specifications as per sheet attached., cieling mount high sensitivity occupany/presence pir sensor. detection range: 360°, power source: 220-240v/ac, rated load: max 2000w detection distance: max.20m. time delay: 10sect 3sec to 30 mint 2min (adjustable), ambient light: <3-2000lux (adjustable), installation height:2.2m-6m, suitable for indoor air conditioner switching
Tender For shifting of distribution system and installation of fhtc damage due to widening of pwd road at siporia batabari pwss under sopd-g for the year 2025-26 under tezpur division-ii, dhekiajuli - providing, laying, jointing, testing and commissioning of isi marked pe 63 grade, pn6 pressure rating high density polyethylene (hdpe) pipes suitable for drinking water supply conforming to is:4984-2016 (with up to date & latest ammenments at the time of execution) from manufacturer store including providing all necessary specials viz., bend, tee, enlarger/reducer, end plug etc. (matching with the prescribe grade & pressure rating same as to that of pipe) and including transportation of the pipes & specials upto work site including handling charges; lowering and laying of pipes & specials in line and level in trenches and/ or over supports ( minimum cover of pipe in trenches shall be 1 meter); jointing of pipes & required specials etc. by fusion welding; construction of required valve chamber and, hydraulic testing of the same (both pipes & specials), including providing all necessary labour & equipment etc., all complete, as directed and specified. 110 mm dia pipe, 90 mm dia pipe, providing functional household tap connection including earthwork in excavation for pipe line (both for connection in distribution line and service connection) and refillling, dressing etc., providing pvc/ hdpe saddle piece of average size 110 mm x 15mm(i.e. ranging from 63mm to 160mm), making holes in the distribution pipe, providing 15mm dia bronze ferrule cock (pn-16) conforming to is:2692 (1989) as ammended from time to time / flow control valve of ss316 with flow of 3 lpm at standard operating pressure of 0.5 bar to 1.5 bar of minimum weight 125gm, connecting it to the saddle piece, providing and fixing 3 layer (outer green / grey coloured middle black coloured uv stabilised and innermost layer white coloured with antimicrobial property) fusion welded pp-r ( poly propylene- random copolymer) pipes, sdr 7.4 having thermal stability for hot and cold water supply conforming is 15801-2008 of average length 10m from saddle piece to the standpost ( pipes of make empanelled manufacturers and pn-16 pipe, 20mm od, sdr-7.4) including all plain pp-r fittings and brass threaded pp-r fitting and clamping, cutting and making good to the damages, including all taxes and duties as applicable and including the cost of all required labour and materials as directed and specified. the item also includes construction and installation pf r.c.c hydrant pillar with cement concrete in proportion 1:2:4 sheathed in swr pipe of dia 100mm height 1200 mm encasing 15mm dia ppr pipe inside the hydrant, inclusive of cost of transportation to site and also supplying fitting and fixing pvc bib cock all complete as directed and specified. approved good for construction drawing will be issued by the deptt.