Get complete information related to latest Fiber Plate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fiber Plate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fiber Plate Tenders.
Tender For bza division:-bza-vskp sec:- provision of pvc pipe covering on bottom x-bracings and covering of cg top flanges with galvanized ms sheet and replacing of ms side pathway at isolated damaged locations with ss chequered plate on br.no.248a (rail cum road bridge) in sse/br/ii/rjy section under aden/br/n/bza jurisdiction.
Tender For bid to ras tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmiya under job no 2502 mmg bkr as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40-63 mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , water proofing compound confirming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9 mtr isi marked with min weight of 34 kgs oblique roll , cement based paint snowcem make-berger , asian , nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled brown confirming to is 5-2004 make-berger , asian , nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger , asian , nerolac , loop holes 1000 x 300 mm make-tata , sail , jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , ms binding wire tata , sail , jsw , ismb hot rolled ms 125 , 4000mm long make-tata , sail , jsw , ismb hot rolled ms 125 , 1200mm long make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , prefab mild steel door of size 900x1700 , outer frame made out of isa 40x40x6mm and door shutter frmae of isa 35x35x5mm and all stiffner isa 30x30x3mm. steel shall conform to is-800 make-tata , sail , jsw , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , preferb folding double sleeping sleeping bunks made of ms columns 65x65x6 mm and ms plate from made of isa 40x40x6mm , hold fast make-tata , sail , jsw as per store list attached , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , nails various size , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make-jindal , tata , kalinga , gi pipe 20 mm dia light grade make-jindal , tata , kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make-presto , polycab , finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make-jindal , tata , kalinga , galvanized iron strip 32 x 6 mm
Tender For supply of white cover plate constructional electrical store - non skid ceramic vitrified tiles size 300x300 make kajaria_somany , lime unslacked , distemper white pale cream make asian_nerolac_j and n_shalimar_berger , butt hinges 3 inch galvanized , butt hinges 4 inch galvanized , butt hinges 5 inch galvanized , butt hinges 6 inch galvanized , butt hinges 8 inch brass galvanized , aluminum door handles 8 inch complete , brass door handles 10 inch complete , aluminum door handles 12 inch complete , paint enamel white in 4 ltrs pack make asian_nerolac_j and n_shalimar_berger , french polish , water storage tanks 1000 ltrs capacity make sintex_ashirwad_padmawati_aqua safe , polyethylene water tanks 2000 ltrs ltrs capacity make sintex_ashirwad_padmawati_aqua safe , bib cock crome steel 15 mm dia long body make jaquar_pristine_hindware_jindal_ceramic_prayag , bib cock crome steel 25 mm dia long body make jaquar_pristine_hindware_jindal_ceramic_prayag , long body faucet bib cock crome steel 15 mm dia long body make jaquar_pristine_hindware_jindal_ceramic_prayag , s and f upvc dia 75 mm swr pipes dia 100 mm 6 mtr long single socketed in any length with rubber ring joints laid in trenches or in floors 75 mm , s and f upvc swr pipes single socketed in any length with rubber ring joints laid in trenches or in floors 110 mm , s and f upvc swr bends any radius 75 mm , s and f u pvc swr bends any radius 100 mm , s and f upvc swr branch piece single single y equal or unequal 75 mm , s and f upvc swr branch piece single single y equal or unequal 100 mm , s and f upvc swr branch piece double double y equal or unequal 75 mm , s and f upvc swr branch piece double double y equal or unequal 100 mm , s and f upvc swr junction single single t equal or unequal 75 mm , s and f upvc swr junction single single t equal or unequal 100 mm , s and f upvc swr junction double double t equal or unequal 75 mm , s and f upvc swr junction double double t equal or unequal 100 mm , s and f upvc swr couplers 75 mm , s and f upvc swr couplers 110 mm , s and f upvc swr reducers 75 mm to 110 mm , s and f upvc swr vent cowl 75 mm , s and f upvc swr vent cowl 110 mm , s and f upvc swr p trap 125 by 110 mm , s and f upvc swr p trap 110 by 110 mm , s and f upvc swr s trap 125 by 110 mm , s and f upvc swr s trap 100 by 100 mm , s and f 110mm upvc swr wc connector with lip ring , upvc swr multi floor trap with grating including jointing with solvent cement 75 mm , upvc swr gully trap 125 by 110 mm , wash basins padestal pattern vitreous china flat back or angle back type standard size with waste pipe make cera_hind ware_jaquar_nexa_bathware_amashen , soap dish standard size fixed to plugs with chromium plated brass screws , modular switch 1 way 6a 1 module make havells_ssk_legrand britzy_orril_hosper , modular switch 1 way 16a 1 module make havells_ssk_legrand britzy_orril_hosper , modular switch 2 way 10a 1 module make havells_ssk_legrand britzy_orril_hosper , modular bell push 6a 1 module make havells_ssk_legrand britzy_orril_hosper , bell ac 230 volts single pole make havells_ssk_legrand britzy_orril_hosper , socket 6a_2 by 3 pin combined 2 module make havells_ssk_legrand britzy_orril_hosper , socket 6a by 16a_2 by 3 pin combined 2 module make havells_ssk_legrand britzy_orril_hosper , fan step regulator 120w 2 module make havells_ssk_legrand britzy_orril_hosper , white cover plate with frame 1 module make havells_ssk_legrand britzy_orril_hosper , white cover plate with frame 2 module make havells_ssk_legrand britzy_orril_hosper , white cover plate with frame 3 module make havells_ssk_legrand britzy_orril_hosper , white cover plate with frame 4 module make havells_ssk_legrand britzy_orril_hosper , white cover plate with frame 6 module make havells_ssk_legrand britzy_orril_hosper , white cover plate with frame 8 module make havells_ssk_legrand britzy_orril_hosper , metal flush box half module make havells_ssk_legrand britzy_orril_hosper , metal flush box 3 module make hav
Tender For supply of chequered plates - ms galvanized is 2062 gr a chequered plate 25 1280 , ms galvanized is 2062 gr a chequered plate 25 1281 , ms galvanized is 2062 gr a chequered plate 25 1282 , ms galvanized is 2062 gr a chequered plate 25 1283 , ms galvanized is 2062 gr a chequered plate 25 1284 , ms galvanized is 2062 gr a chequered plate 25 1285 , ms galvanized is 2062 gr a chequered plate 25 1286
Tender For supply and installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mlalads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse
Tender For corrigendum : supply, installation, testing and commissioning of primary protection class b or type 2 supply and installation of surge protection device , supply, installation, testing and commissioning of second stage protection class c or type 3 supply and installation , supply, installation, testing and commissioning of earthing with copper earth , supply, installation, testing and commissioning of 25 mm x 3 mm copper strip , supply, installation, testing and commissioning of 4mm dia copper wire with clamps or tie , supply, installation, testing and commissioning of conventional vertical air terminal lightening arrestor, made of 1 inch dia 5 feet length , supply, installation, testing and commissioning of elevation pole made of gi material , supply, installation, testing and commissioning of elevation pole made of gi , supply, installation, testing and commissioning of 50 mmx 3 meters length material , supplying and laying of heavy duty pvc pipes for electrical applications, 100mm diameter, standards outlined , supplying and laying of electrical hose pipe in a 40mm diameter, require it to be gi pipe , supply, installation, testing and commissioning of raceway with l and t junctinon 6 inch x 10 feet x18 gnuge of perforated type cable , supply, installation, testing and commissioning of perforated cable trays at with l and t junctinon 6 inch x 10 feet x18 gnuge made out of prefabricated galvanized sheet steel , supply, installation, testing and commissioning of extension board , sitc of providing joints by using brazing technique on 25 mm x 3 mm copper or gi strip on surface or in recess for connections to another copper or gi earth , supply, installation, testing and commissioning of earthing with copper earth plate , supply, installation, testing and commissioning of gi pipe earthing , supplying and laying 25 mm x 3 mm copper strip , sitc of 5 kg abc or co2 type fire extinguishers , design, manufacturing, supply, installation, testing and commissioning of environmental friendly aerosol based fire suppression system , supply, installation, testing and commissioning of conventional agent release control panel with battery back up for 30 minutes in alarm condition , supply, installation, testing and commissioning of conventional type en listed or equivalent indian standard ip based optical smoke detectors , supply, installation, testing and commissioning of conventional type en listed or equivalent indian standard ip based heat combination detectors , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based manual release switch , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based manual abort switch , supply, installation, testing and commissioning of en listed or equivalent indian standard op based manual call point, , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based conventional sounder cum strobe , supply, installation, testing and commissioning of gas discharge identification signage , supply, installation, testing and commissioning of addressable ip based multi photo electric or optical smoke detector or fire sensor , supply, installation, testing and commissioning of auto dialer unit , supply, installation, testing and commissioning of ip based addressable manual call point , supply, installation, testing and commissioning of ip based addressable horn cum strobe , supply, installation, testing and commissioning of fire alarm armoured cable , supply, installation, testing and commissioning of response indicator on surface or recess ms box , supply, installation, testing and commissioning of supporting tube for hvi long conductor , supply, installation, testing and commissioning of elevation pole made of gi material having isi marking , supply, installation, testing and commissioning of fixing clamp with tensioning strap, for fixing combi supporting tubes , supply, installation, te
Tender For bid to ras supply of construction material of ug comd post - ms anchor bolt and all other specification as per rfp , ceramic tiles and all other specification as per rfp , white cement and all other specification as per rfp , curtain arrangement drapery and rod and all other specification as per rfp , coarse sand and all other specification as per rfp , coarse aggregate and all other specification as per rfp , stone boulder and all other specification as per rfp , pvc pipe and all other specification as per rfp , coarse sand and all other specification as per rfp , hardcore and all other specification as per rfp , brick and all other specification as per rfp , three phase monoblock pump and all other specification as per rfp , distribution box and all other specification as per rfp , mcb spn and all other specification as per rfp , mcb sp and all other specification as per rfp , pvc tape and all other specification as per rfp , cable and all other specification as per rfp , pvc casing capping and all other specification as per rfp , modular switch piano and all other specification as per rfp , led tube light fittings and all other specification as per rfp , led mirror lights and all other specification as per rfp , screw and all other specification as per rfp , pvc switch board and all other specification as per rfp , pvc l bend and t junction joint and all other specification as per rfp , modular switch socket combination and all other specification as per rfp , service bracket and all other specification as per rfp , service cable and all other specification as per rfp , ceiling rose and all other specification as per rfp , led bulk head fitting and all other specification as per rfp , pvc flexible wire and all other specification as per rfp , pvc flexible conduit pipe and all other specification as per rfp , pvc round squire block and all other specification as per rfp , exhaust fan and all other specification as per rfp , fire extinguisher and all other specification as per rfp , earthing plate and all other specification as per rfp , ci earth pit cover and all other specification as per rfp , funnel fitted and all other specification as per rfp , gi wire and all other specification as per rfp , charcoal and all other specification as per rfp , salt and all other specification as per rfp , air termination and all other specification as per rfp , testing point terminal block and all other specification as per rfp , aluminium strips and all other specification as per rfp , galvanized iron strip and all other specification as per rfp , insulating pvc block and all other specification as per rfp , double sleeping bunk and all other specification as per rfp , steel bed side locker and all other specification as per rfp , study chair and all other specification as per rfp , study table and all other specification as per rfp , looking mirror and all other specification as per rfp , peg set of six and all other specification as per rfp , water dispenser and all other specification as per rfp , kero heater and all other specification as per rfp , individual standalone plastic body smoke alarm and all other specification as per rfp , individual standalone plastic body heat alarm and all other specification as per rfp , fire ball extinguisher and all other specification as per rfp
Tender For supplying, installation, testing various material for lighting at various places under nagar parishad dindori (fy-2025-2026) 2nd call - decorative designer poles in different section, 60mm dia., bottom 140mm with gold colour painted ornamental cast aluminium ring having lockable weather proof flush door junction box in bottom saction, base plate dia. 200mm having 4 holes of 22mm dia. complete erected in an approved manner on existing foundation. suitable size & type of foundation bolts 4 nos. x 450 mm j type 3 meter height, decorative designer poles in different section, 60mm dia... bottom 140mm with gold colour painted ornamental cast aluminium ring having lockable weather proof flush door junction box in bottom section, base plate dia. 200mm having 4 holes of 22mm dia. complete erected in an approved manner on existing foundation. suitable size & type of foundation bolts 4 nos x 450 mm j type 4 meter height, decorative designer poles in different section, 60mm dia... bottom 140mm with gold colour painted ornamental cast aluminium ring having lockable weather proof flush door junction box in bottom section, base plate dia. 200mm having 4 holes of 22mm dia. complete erected in an approved manner on existing foundation. suitable size & type of foundation bolts 4 nos x 450 mm j type 5 meter height, providing and fixing of sword canopy type single arm gi bracket upto 2 mr. long for 70mm a/f top octagonal pole, providing and fixing of sword canopy type double arm gi bracket upto 2 mtr. long for 70mm a/f top octagonal pole, providing and erecting 9mtrs. high hot dipped galvanized octagonal poles with bottom of 200mm a/f, top 100mm a/f made from 3mm thick ht plate & 290x290x16mm base plate with 1500mm long decorative sword type double arm bracket complete ererted in an approved manner on provided foundation. suitable size & type of foundation bolts. 4 nos. bolts type m20x750mm j type foundation bolts (en8 grade), providing and erecting 9mtrs. high hot galvanized octagonal poles with bottom of 155mm a/f, top 70mm a/f made from 3mm thick ht plate & 260x260x16mm base plate with 1500mm long decorative sword type double arm bracket complte erected in an approved manner on provided foundation. suitable size & type of foundation bolts. 4 nos. bolts type m20x750mm j type foundation bolts (en8 grade), designing & casting with m-20 cement concrete foundation sultable for 9 mtrs. octagonal poles considering the safe soll bearing capacity at site as 10 t/sqm at 2 mtrs. depth including excavation, foundation nut bolts in an approved manner., providing: erecting. testing and commissioning solar street light system heavy duty galvanised iron pipe 5-6 meter nigh! with base plate installed own cement concrete padestal casting complete with solar panel, solar battery with charger. other accessories with control panel in weather proof pole box. solar fitting led type or 18 wall to 20 watt (set of 3-4 nos.), astro time switch-for lights on-off based on sunrise & sunset timing supply, installation, testing and commissioning of astro-time switch based on astro program, suspention clamp with atlachament clamp, dead end clamp with attachament clamp, spring loaded 1 phase box with clamp, spring loaded 3 phase box with clamp, 2 x 25 mm + 1 x 16 sqmm abc lt cable, 3 x 25 mm + 1 x 16 sqmm abc lt cable, 2 x 35 mm +1 x 16 sqmm abc lt cable, stay clamp all type, dwc (double- walled corrugated) pipe 50 mm, hdpe pipe 50 mm, g1 plate with earthing complete, 25 x 5 mm g1 strip including labour charge, copper plate with earthing complete, 25 x 5 mm copper string including labour charge, street light pole box with 06 amp single phase mcb, unipole hoarding sign board for outdoor advertising with installation, testing and commissioning (including foundation, lighting. arrangement etc.), unarmoured 2 core cable (with laying and installation) 2.5 sqmm, unarmoured 2 core cable (with laying and installation) 4 sqmm, unarmoured 2 core cable