Get complete information related to latest Fibre Planter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fibre Planter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fibre Planter Tenders.
Tender For bid to ras supply of acp customized arc with led lights for museum size 4ft x 4ft with installation and labour charges , acp customized arc with led lights for museum size 84 x36 inch with installation and labour charges , polyvinyl chloride fluted panels for all partitions 300ft x 8ft with installation and labour charges , showcase and display stands covering 5 poles with plywood and laminate size 24 ft x 2ft x 8ft height with installation and labour charges , rotating square drum of acrylic display with led with installation and labour charges , 1st and last pole covered with laminate and glass display size 4ft h x 1 ft w 14 inch b with installation and labour charges , gypsum false ceiling 2x2 feet with 2x2 feet panel led lights 30nos including electric fitting with installation and labour charges , frp model with wooden stand and covered with glass statue of father of pharmacy size 24 inch x 18 inch x 24 inch height with installation and labour charges , glass posters with printed vinyl sandwiched size 30 inch x42 inch, 4mm glass sandwiched with installation and labour charges , frp wall murals size 3ft x 2ft with installation and labour charges , linoleum flooring size 2000 sqft with installation and labour charges bid number/ & ( * ) : gem/2025/b/6023094 dated/ + : 03-04-2025 bid document/ 3 3 1 / 15
Tender For bid to ras supply of recce boat and baut spares - webbing nylon 44mm x 670mm lg is4727 drawing no imga 0067 a specification no cqae 1940 1520 b 2006 , e2ieb usa0003 ring spanner 12x13mm , 14 2040 000382 oar10ft 3 point 05m drawing no impd 1824 specification no ind eng prov 1172 , 14 1940 000213 coupling deck drawing no impd 0523 specification no cqae 1940 1575 a , 14 1940 000127 hull drawing no imga 0067 1 b and connected drawings specification no cqae 1940 1520 b 2006 , 14 1940 000232 floor board frp in three parts drawing no impd 2047 a specification no cqae 1940 1520 b 2007 , 14 5305 009848 screw machine csk head bm 8x 90n is1365 drawing no impd 0496 a specification no cqae 1940 1575 a , 14 5315 003911 pin lock bottom link side drawing no impd 0527 specification no cqae 1940 1575 a , f1 5340 000967 pad lock ig 4 lever 40mm , 14 114 0163 anchor bridging 60 lbs , f1 5120 001352 screw driver engrs 290 mm long , 4210000115 nozzle branch pipe 22m , 14 5315 000423 pin tapper solid steel 6 dia x 30 is 2393 drawing no impd 0524 specification no cqae 1940 1575 a , f1 5120 002952 hammer ball pein engineering 200 gm with handle drawing no impd 0496 a specification no cqae 1940 1575 a , 14 5140 000114 box repair kit drawing no impd 0496 a specification no cqae 1940 1575 a , 14 2090 000052 panel splash starboard with u brackets drawing no impd 0548 specification no cqae 1940 1575 a , 14 4820 001232 stop rubber drawing no impd 0496 a specification no cqae 1940 1575 a , 14 5315 003912 pin deck coupling with chains and cleat drawing no impd 0524 specification no cqae 1940 1575 a , 14 5120 004321 podger with handle 170mm long drawing no impd 0496 a specification no cqae 1940 1575 a , e2 1940 000154 cover water protection canvas boat assault universal drawing no imga 0074 a and connected drawings specification no ind eng prov 1092 a , e2 3990 000045 ramp loading vehicle for boat assault universal drawing no imga 0074 a and connected drawings specification no ind eng prov 1092 a , 14 2090 000049 cap detachable nylon for pin pivot drawing no impd 0540 specification no cqae 1940 1575 a , 14 1940 000216 platform vehicle loading portable for boat assault universal drawing no imsa 0055 a and connected drawings specification no ind eng prov 1092 a , 14 2090 000051 panel splash centre with u brackets drawing no impd 0547 specification no cqae 1940 1575 a
Tender For corrigendum : supply of pneumatic panel type -1 detailed as per annexure a , pneumatic panel type-2 detailed as per annexure a , pneumatic panel type-3 detailed as per annexure a , pneumatic panel type-4 detailed as per annexure a , pneumatic panel type-5 detailed as per annexure a , pneumatic panel type-6 detailed as per annexure a , jb - 84 way , 600 x 600 mm minimum-frp , emergency push button station -1 emergency stop with 2no and 2 nc, 8 tbs , pressure switches as per annexure b for details of pressure switch , r6fh rubber hose - 0.5 inch for outside panel connections , r6fh rubber hose- 0.25 inch for outside panel connections , solenoid valves -10 percent minimum 1 no of each type and rating or model - mandatory spares , pressure switches- 10 percent minimum 1 no of each type and rating or model-- mandatory spares , commissioning of pneumatic panels. the visit shall be inclusive of accommodation or stay at site. , travel expenses - to and fro charges, local transportation etc. to project site for commissioning.
Tender For supply of frp side wall / end wall panel for lwscz coaches to drg no. lwscz2-4-2-004, alt-nil and partition panelling to drg no. lwscz2-4-3-001, alt-a and specn.for frp panel s hall be as per specification mdts-133, rev-05 (without painting to specification mdts-118). required colour shade to be achieved through gel coat. please visit icf vendor portal for d ownloading drawing https:// vp.icf.gov.in/ vendtendordetnew.php using key 0725nw0umwe2000 [ wa rranty period: 30 months after the date of delivery ]
Tender For supply and installation of frp side wall / end wall panel for lwscz coaches to drg no. lwscz2-4-2-006, alt-nil and partition panelling to drg no. lwscz2-4-3-001, alt-a and specn.for frp panel shall be as per specification mdts-133, rev05 (without painting t o specification mdts-118). required colour shade to be achieved through gel coat.please visit icf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key : 0725s9sqrfe2415. [ warranty period: 72 months after the date of delivery ]
Tender For construction of artificial rock climbing wall cum slithering platform in garrison battalion ground - earth work in excavation by mechanical means hydraulic excavator oblique manual means in foundation trenches or drains not exceeding 1 dot 5 m in width or 10 sqm on plan , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering , providing and laying in position specified grade of reinforced cement concrete , brick work with burnt clay fps non modular bricks of class designation 7 dot 5 in foundation and plinth in ratio cement mortar 1 ratio 4 bracket 1 cement ratio 4 coarse sand , 12mm thick cement plaster 1ratio4 , filling available excavated earth excluding rock in trenches plinth sides of foundations , supplying and filling in plinth with jamuna sand under floors including watering ramming consolidating and dressing complete , steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars , supplying of m s bolts round holding down of anchor boltds with nuts and washer plates complete , structural steel work , providing and fixing ms chequered plate 5mm thick , providing and fixing 0dot8mm thick colour coated sheet for shed , designing providing and fixing frp 3d panel with minimum 6 mm thickness at center and 10 mm at flanges , providing and fixing ss top belay bar , movable climbing holds , providing seat harness , static rope 10 mm , carabiner , providing bracket fdotodot8 bracket , providing mitton , gri gri , providing quick draw , 30mm manila rope bid number/ & ( * ) : gem/2025/b/6191380 dated/ + : 18-05-2025 bid document/ 3 3 1 / 19
Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan
Tender For supply of a set of items for replacement of emergency window in lgs coaches : (1) emergency windo w arrangement for improved lhb gs coaches as per drg. no. mi008176 alt. "b". (qty = 04 nos.) (2) bracket for fixing emergency window as per drg. no. lg14543. (qty = 04 nos.) (3) bracket for fixing emergency window as per drg. no. lg14544. (qty = 04 nos.) (4) set of frp window panel for emergency window for l hb gs coaches as per drg. no. mplewplsdd version 0. (qty = 01 set) (01 set = item no. 1 to 4) [ warran ty period: 24 months after the date of delivery ]
Tender For supply of frp under panel of cab (01 set consisting of 02 nos.) to clw spec no. clw/ms /3/018 alt.-3 and clw drg nos. 1209-08.130-012 alt.-5, & 1209-08.230-013 alt.- 2 and str no. clw/2020/eldo/ms/str/0102, rev.-01 [ warranty period: 30 months after the date of delivery ]