Web Analytics Made Easy - StatCounter

File Compactor Tenders

Get complete information related to latest File Compactor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic File Compactor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding File Compactor Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :40482318 Due date: 31 May, 202531 May, 2025 1.81 Lacs
Tender For cliff house - urgent repair work urgent work for removing the wooden partition and construct a new wall at cliff house.

State Government

CTN :40501962 Due date: 04 Jun, 202504 Jun, 2025 1.14 Lacs
Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Central Government/Public Sector

CTN :40507545 Due date: 18 Jun, 202518 Jun, 2025 83.50 Lacs
Tender For supply of demolishing cement concrete , dismantling tile work in floors and roofs , dismantling of flushing cistern , dismantling doors, windows and clerestory windows , providing and laying plain cement concrete , providing and laying in position reinforced cement concrete work , providing and laying steel reinforcement for r.c.c. work , providing and fixing centering and shuttering , providing 15 mm thick cement plaster , providing and fixing ist quality ceramic glazed wall tiles , providing and laying vitrified tiles in different sizes , providing and applying two coats of white washing , providing and applying one coat of cement primer , providing and applying wall painting with acrylic emulsion paint , supplying and laying two or more coats painting with synthetic enamel paint , providing and fixing factory made isi marked steel glazed doors ,windows and ventilators , providing and fixing 35mm thick isi marked flush door shutters , providing and fixing isi marked oxidised m.s. handles , providing and fixing oxidised m.s. casement stays , providing and fixing water closet squatting pan , providing and fixing white vitreous china pedestal type water closet , providing and fixing isi marked oxidised m.s. tower bolt , providing and fixing glass panes , white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps. , white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer , providing and fixing 15 mm nominal bore c.p brass angle valve for basin mixer and geyser points , providing and fixing c.p. brass stop cock , providing and fixing c.p. brass bib cock , providing and fixing 600x450mm bevelled edge mirror of superior glass , providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats , providing and fixing 600x120x5 mm glass shelf with edges round off , providing and fixing c.p. brass toilet paper holder , providing and fixing c.p. brass shower rose with 15 or 20mm inlet , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin , 15 mm dia nominal bore , 20 mm dia nominal bore , 25 mm dia nominal bore , 75mm dia sand cast iron s and s pipe , 100 mm dia sand cast iron s and s pipe , half brick masonry with common burnt clay , providing and fixing 18 mm thick granite of any size,colour and shade , providing and fixing 10 mm thick acid and or alkali resistant tiles , providing and fixing 25mm thick cup board shutter isi marked , providing and fixing 15 mm nominal bore c.p. brass long body bib cock , providing and fixing white vitreous china laboratory sink , structural steel work in single section, fixed with or without connecting plate

State Government

CTN :40476515 Due date: 10 Jun, 202510 Jun, 2025 6.35 Lacs
Tender For providing anti termite control for maintenance of interior wooden work and inside & outside of the building to cpgs, library, boys & girls hostel, sc/st boys & girls hostel building at vtu, regional centre, kalaburagi. (2nd call)

Central Government/Public Sector

CTN :40477173 Due date: 16 Jun, 202516 Jun, 2025 NA
Tender For annual repair and maintenance of to nci, jhajjar campus of aiims new delhi sh: - preventive protective measures in masonry and wooden work at outreach opd and hospital complex buildings.

Central Government/Public Sector

CTN :40494431 Due date: 06 Jun, 202506 Jun, 2025 NA
Tender For supply of wooden almirah / wardrobe (v2) (q2) , revolving chair (v4) (q2) , modular work stations (v2) (q3)

Corporations And Associations And Others

CTN :40515812 Due date: 05 Jun, 202505 Jun, 2025 2.00 Lacs
Tender For renovation of office building in superintending engineer or circle office of wooden work and sanitary items in toilet etc. complete in all respect and all other works contingent thereto.

CTN :40507765 Due date: 18 Jun, 202518 Jun, 2025 NA
Tender For supply of supply and installation of false ceiling , supply and installation of false ceiling lights , supply and installation of exhaust fan , supply and installation of pvc flooring , supply and installation of wooden panel with wallpaper work for wall , supply and installation of cnc window wood panel and pvc panels , supply and installation of door stopper

CTN :40507520 Due date: 18 Jun, 202518 Jun, 2025 NA
Tender For supply of pvc panel , blinds curtains 3 feet into 4 feet , file compactor 4 feet into 2 feet into 8 point 5 feet , work station 3 point 5 feet into 7 feet , file cabinets 6 feet into 3 feet into 2 feet , file cabinets 4 feet into 3 feet into 2 feet , chair , air purifier

CTN :40508498 Due date: 17 Jun, 202517 Jun, 2025 NA
Tender For supply of cement in polythene bags 50 kgs each 43 opc , sand coarse , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , rr stone boulders , tmt steel bar 8 mm dia , tmt steel bar 10 mm di , tmt steel bar 12 mm dia , tmt steel bar 16 mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric , 75mm dia pvc pipe for weep hole , scantling 3 x 3 inch seasoned first class hard wood 2 point 30 mtr long , shuttering plywood of size 8 x 4 feet and 12mm thickness , binding wire 20 gauge zero point 9mm annealed , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 4 inch for shuttering , water proofing compound , quick setting compound , ms door pre fabricated , loophole of size 600 mm x 500 mm , bitumen vg 10 , 10mm thick ms plate as in one layer on roof , 20mm thick ms plate as in two layers on roof , shredded rubber 150 mm , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , paint brush , lighting conductor complete set , cut off machine 14 inch , tile cutter make bosch for ply cutting , working goggle 1 as per sample , ppgi sheet zero point 60 mm thick of size 10 x 03 feet , durmut 5 kg with 5 feet wooden handle , concrete vibration machine petrol needle , hand gloves rubber best quality , pan motor tasala 18 dia made of steel , phawrah with handle midium size , shovel with handle , measuring tape 5 mtr rectractable grade a1 16 , measuring tape 10 mtr rectractable grade a1 16 , wiremess for seiving sand 1 mtr width 15 mtr roll , axes picks 3 kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gum boot various size , spirit level 10 inch long , nylon mason thread 100m long , mild steel single hand double wheel barrow to carry upto wheel barrow 200 kg weight , rock drill machine bit 48mm thick , rock drill machine bit 32mm thick , plumbob steel with lasing , water level pipe for mason work transparents , hammer 10 kg with handle , tmt bar bending frame , tmt bar bending handle , wooden gurmala of size 8 x 4 inch , aluminium study of size 3 x 2 inch and 6 feet long , steel gurmala of size 8 x 4 inch , hdpe tirpal of size 30 x 30 feet , steel bucket 15 ltr , iron cutter blade 14 feet , iron cutter blade 4 feet , hexa blade double side , portable hydraulic concrete mixer machine conforming to is 12119 to 1987 to provide an uniform mix for a reliable operation
 Loading, Please wait...

Connect us via What's Up